Theoretical Modeling and Numerical Study for Thrust-Oscillation Characteristics in Solid Rocket Motors

被引:15
|
作者
Zhang, Qiao [1 ]
Wei, Zhi-jun [1 ]
Su, Wan-xing [1 ]
Li, Jun-wei [1 ]
Wang, Ning-fei [1 ]
机构
[1] Beijing Inst Technol, Sch Aerosp Engn, Beijing 100081, Peoples R China
基金
中国国家自然科学基金;
关键词
UNSTEADY-FLOW EVOLUTION; SURFACE MASS INJECTION; POROUS CHAMBER; NOZZLE CAVITY; LARGE SRM; DRIVEN; INSTABILITY; EXCITATION; RESONANCE; SOUND;
D O I
10.2514/1.B34152
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
To discover thrust-oscillation characteristics in solid rocket motors, analytical modeling and numerical simulation are carried out by an experimental motor in the von Karman Institute for Fluid Dynamics. The numerical method by means of a mesh sensitivity analysis is proposed for validation. Velocity profiles, oscillation frequencies, and pressure amplitudes were obtained by numerical simulations and then compared with the experimental data. Various cases with different inlet temperatures are proposed to investigate the influences of parameters on the oscillation characteristics. The results indicate that it is not a necessary condition for vortex-shedding frequency to approach a certain acoustic frequency when periodic oscillations are generated. Oscillations are more severe if the vortexshedding phenomenon couples with high-order acoustic modes. Velocity magnitude in the combustion chamber is the main factor that influences the vortex-shedding frequency; meanwhile, the pressure amplitude is mostly determined by the mean Mach number. Theoretical modeling in conjunction with numerical calculations proves that the ratio of dimensionless thrust amplitude to pressure amplitude is predominantly determined by the throat-to-port-area ratio J, and it varies inversely as J. An integrated formula is presented to describe the relationship between thrust amplitude and pressure amplitude.
引用
收藏
页码:312 / 322
页数:11
相关论文
共 50 条
  • [31] Numerical Modeling and Studies of Ignition Transients in End-Burning-Grain Solid Rocket Motors
    Hu, Bowen
    Wang, Bing
    Tian, Xiaotao
    JOURNAL OF PROPULSION AND POWER, 2016, 32 (06) : 1333 - 1342
  • [32] Study on Separation Characteristics of Nozzles with Large Expansion Ratio of Solid Rocket Motors
    Wang, Zhihong
    Wang, Chunguang
    Tian, Weiping
    AEROSPACE, 2023, 10 (01)
  • [33] Numerical Study on Response Characteristics of Solid Rocket Pintle Motor
    Sapkota, Jeevan
    Xu, Yi Hua
    Sun, Hai Jun
    JOURNAL OF AEROSPACE TECHNOLOGY AND MANAGEMENT, 2019, 11
  • [34] Stability analysis and numerical simulation of simplified solid rocket motors
    Boyer, G.
    Casalis, G.
    Estivalezes, J. -L.
    PHYSICS OF FLUIDS, 2013, 25 (08)
  • [35] NUMERICAL MODELLING OF SOLID ROCKET MOTORS FOR MECHANICAL INTEGRITY ASSESSMENT
    Abid, Rabia
    Gill, Philip P.
    Hameed, Amer
    Gibson, Mike C.
    29TH INTERNATIONAL SYMPOSIUM ON BALLISTICS, VOLS 1 AND 2, 2016, : 522 - 529
  • [36] Investigation of dynamic mixing combustion characteristics in variable thrust hybrid rocket motors
    Xia, Hanqing
    Wang, Ningfei
    Yang, Junsen
    Wu, Yi
    COMBUSTION AND FLAME, 2023, 250
  • [37] DEFICIENCIES AND REQUIREMENTS IN MODELING OF SLAG GENERATION IN SOLID ROCKET MOTORS
    SALITA, M
    JOURNAL OF PROPULSION AND POWER, 1995, 11 (01) : 10 - 23
  • [38] SIMPLE MODELING OF PARTICLE TRAJECTORIES IN SOLID ROCKET MOTORS - REPLY
    BRENT, D
    FENDELL, F
    ACOSTA, P
    JOURNAL OF PROPULSION AND POWER, 1994, 10 (03) : 438 - 440
  • [39] THERMAL MODELING OF SHUTTLE SOLID ROCKET MOTORS ON THE LAUNCH PAD
    MATHIAS, EC
    AHMAD, RA
    JOURNAL OF SPACECRAFT AND ROCKETS, 1994, 31 (02) : 237 - 242
  • [40] SIMPLE MODELING OF PARTICLE TRAJECTORIES IN SOLID ROCKET MOTORS - COMMENT
    MURDOCK, JW
    JOURNAL OF PROPULSION AND POWER, 1994, 10 (03) : 437 - 438