Examination of the influence of heat treatment on the properties of Al-Si alloys

被引:0
|
作者
Vuksanovic, Darko
Markovic, Srdjan
Petrovic, Stanka Tomovic
Rakocevic, Snezana
Kovacevic, Kata
Tripkovic, Snezana
机构
[1] Fac Met, Podgorica 81000, Montenegro
[2] Fac Technol & Met, Belgrade 11000, Serbia
[3] Inst Kirilo Savic, Belgrade 11000, Serbia
[4] HK Petar Draspin, Mladenovac 11400, Serbia
关键词
alloys of Al-Si system; heat treatment; mechanical properties; inter-metallic phase; microstructure;
D O I
10.1002/srin.200706261
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
In this paper the influence of heat treatment on the structural and mechanical properties of AI-Si alloys was investigated. Silicon content in the examined alloys was in the range 11 to 14%, the contents of the other alloying elements were in the standard range [1] but all alloys were modified with strontium. The regime of the applied heat treatment was quenching (520 degrees C/6h - cooling in water) + aging (205 degrees C/7h air cooling). The examinations were carried out at room temperature as well as at 250 degrees C and 300 degrees C. The obtained results showed a positive influence of the applied heat treatment on the mechanical properties of the examined alloys. The improvement of the mechanical properties can be considered as a consequence of a redistribution and change of morphology of the phases present in the structure of the alloys.
引用
收藏
页码:648 / 653
页数:6
相关论文
共 50 条
  • [41] INFLUENCE OF SR CONTENT ON THE MODIFICATION OF SI PARTICLES IN AL-SI ALLOYS
    WANG, LB
    SHIVKUMAR, S
    ZEITSCHRIFT FUR METALLKUNDE, 1995, 86 (06): : 441 - 445
  • [42] THERMODYNAMIC PROPERTIES OF LIQUID ALLOYS OF AL-SI SYSTEM
    LOSEVA, AF
    ALMUKHAMEDOV, AI
    TYUMENTSEV, VN
    LUZHNOVA, MA
    ZHURNAL FIZICHESKOI KHIMII, 1977, 51 (02): : 495 - 496
  • [43] Analysis of the Mechanical Properties of Anodized Al-Si Alloys
    Regone, Natal Nerimio
    Alvarenga Freire, Celia Marina
    Ballester, Margarita
    Mariano, Neide Aparecida
    Codaro, Eduardo Norberto
    Acciari, Heloisa Andrea
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2022, 25
  • [44] Effect of barium on the microstructure and properties of Al-Si alloys
    Li, Wei
    Sheng, Xianfeng
    Ji, Jiaqi
    Hu, Yongsha
    Xu, Jin
    Rejiagong Gongyi/Hot Working Technology, 1995, (06): : 27 - 29
  • [45] Structure Sensitive Properties of Liquid Al-Si Alloys
    Sklyarchuk, V.
    Plevachuk, Yu.
    Yakymovych, A.
    Eckert, S.
    Gerbeth, G.
    Eigenfeld, K.
    INTERNATIONAL JOURNAL OF THERMOPHYSICS, 2009, 30 (04) : 1400 - 1410
  • [46] Increasing of Microhardness of Al-Si Alloys by Laser Treatment
    Volchok, I. P.
    Girzhon, V. V.
    Tantsiura, I. V.
    METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2011, 33 (08): : 1111 - 1118
  • [47] PEO of pre-anodized Al-Si alloys: Corrosion properties and influence of sealings
    Mohedano, M.
    Matykina, E.
    Arrabal, R.
    Mingo, B.
    Pardo, A.
    APPLIED SURFACE SCIENCE, 2015, 346 : 57 - 67
  • [48] Modification of Al-Si Alloys
    Campbell, J.
    TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 119, 2011, 119 : 171 - 175
  • [49] Silicon and Al-Si alloys
    Taran, YN
    Kutsova, VZ
    METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2001, 23 : 11 - 16
  • [50] THE EFFECT OF THE HEAT-TREATMENT ON THE SUPERCONDUCTING PROPERTIES OF FAST QUENCHED AL-SI
    KUAN, WY
    CHEN, SS
    YI, SS
    WANG, ZL
    WU, C
    GAROCHE, P
    PHYSICA B & C, 1982, 109 (1-3): : 2067 - 2069