Examination of the influence of heat treatment on the properties of Al-Si alloys

被引：0
|
作者：
Vuksanovic, Darko
Markovic, Srdjan
Petrovic, Stanka Tomovic
Rakocevic, Snezana
Kovacevic, Kata
Tripkovic, Snezana
机构：
[1] Fac Met, Podgorica 81000, Montenegro
[2] Fac Technol & Met, Belgrade 11000, Serbia
[3] Inst Kirilo Savic, Belgrade 11000, Serbia
[4] HK Petar Draspin, Mladenovac 11400, Serbia
来源：
STEEL RESEARCH INTERNATIONAL | 2007年 / 78卷 / 08期
关键词：
alloys of Al-Si system; heat treatment; mechanical properties; inter-metallic phase; microstructure;
D O I：
10.1002/srin.200706261
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this paper the influence of heat treatment on the structural and mechanical properties of AI-Si alloys was investigated. Silicon content in the examined alloys was in the range 11 to 14%, the contents of the other alloying elements were in the standard range [1] but all alloys were modified with strontium. The regime of the applied heat treatment was quenching (520 degrees C/6h - cooling in water) + aging (205 degrees C/7h air cooling). The examinations were carried out at room temperature as well as at 250 degrees C and 300 degrees C. The obtained results showed a positive influence of the applied heat treatment on the mechanical properties of the examined alloys. The improvement of the mechanical properties can be considered as a consequence of a redistribution and change of morphology of the phases present in the structure of the alloys.
引用
收藏
页码：648 / 653
页数：6
相关论文
共 50 条
  • [1] INFLUENCE OF REFINING TREATMENTS ON THE PROPERTIES OF Al-Si ALLOYS
    Rzadkosz, S.
    Zych, J.
    Piekos, M.
    Kozana, J.
    Garbacz-Klempka, A.
    Kolczyk, J.
    Jamrozowicz, L.
    METALURGIJA, 2015, 54 (01): : 35 - 38
  • [2] Effect of Cu, Si and Heat Treatment on the Conductivity of Al-Si Alloys
    Li Bin
    Yang Zhao
    Yang Xuyue
    Li Shaokang
    Xu Deying
    RARE METAL MATERIALS AND ENGINEERING, 2015, 44 (11) : 2857 - 2861
  • [3] Effect of Cu, Si and heat treatment on the conductivity of Al-Si alloys
    Li, Bin
    Yang, Zhao
    Yang, Xuyue
    Li, Shaokang
    Xu, Deying
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2015, 44 (11): : 2857 - 2861
  • [4] Influence of fluidized sand bed heat treatment on the performance of Al-Si cast alloys
    Ragab, Kh. A.
    Samuel, A. M.
    Al-Ahmari, A. M. A.
    Samuel, F. H.
    Doty, H. W.
    MATERIALS & DESIGN, 2011, 32 (03) : 1177 - 1193
  • [5] Influence of forging and heat treatment on wear properties of Al-Si and Al-Pb bearing alloys in oil lubricated conditions
    Feyzullahoglu, Erol
    Erturk, Alpay Tamer
    Guven, Ersin Asim
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (12) : 3575 - 3583
  • [6] Influence of microstructure on mechanical properties of hypereutectic Al-Si alloys
    Goni, JV
    RodriguezIbabe, JM
    Urcola, JJ
    CMMC 96 - PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON CERAMIC AND METAL MATRIX COMPOSITES, PTS 1 AND 2, 1997, 127-3 : 911 - 918
  • [7] Influence of microstructure on mechanical properties of hypereutectic Al-Si alloys
    CEIT and ESII, San Sebastian, Spain
    Key Eng Mat, Pt 2 (911-918):
  • [8] INFLUENCE OF HEAT TREATMENT ON Al-Si COATING CHEMICAL COMPOSITION
    Petr-Soini, Jaroslav
    Kejzlar, Pavel
    Kucera, Vojtech
    Janovec, Jiri
    Kolarikova, Marie
    27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018), 2018, : 985 - 989
  • [9] Influence of Ti addition on wear properties of Al-Si eutectic alloys
    Saheb, N
    Laoui, T
    Daud, AR
    Harun, M
    Radiman, S
    Yahaya, R
    WEAR, 2001, 249 (08) : 656 - 662
  • [10] Influence of Pressure on Al-Si Alloys System
    Nová I.
    Machuta J.
    Skalický I.
    Manufacturing Technology, 2017, 17 (04): : 41 - 42
12345