NUMERICAL PREDICTION OF CONSTRAINT EFFECT OF CREEP CRACK GROWTH

被引：0
|
作者：
Yatomi, Masataka [1 ]
Nikbin, Kamran M. [1 ]
机构：
[1] IHI Corp, Yokohama, Kanagawa, Japan
来源：
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 6, PTS A AND B | 2010年
关键词：
CONTINUUM DAMAGE;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper presents the effect of constraint on creep crack growth (CCG) using FE analysis based on the stress and strain rate state at the crack tip. The comparison is made by modelling C(T) specimen tests under plane stress and plane strain conditions using creep properties of three different steels (C-Mn steel, P91 steel, and 316H austenitic steel). In addition, in order to examine the constraint effect on CCG due to geometry single edge notch specimen (SENT), centre cracked tension specimen (CCT) and three point bending (3PB) specimen have also been analysed. In all cases it is found that when the reference stress under plane strain conditions is higher than the yield stress, there is little difference between CCG rates under plane stress and plane strain.
引用
收藏
页码：1541 / 1548
页数：8
相关论文
共 50 条
  • [31] Mismatch Constraint Effect of Creep Crack With Modified Boundary Layer Model
    Dai, Yanwei
    Liu, Donghuan
    Liu, Yinghua
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 2016, 83 (03):
  • [32] Numerical analysis of creep crack growth in precavitated polycrystalline copper
    Kim, Yong-Suk, 1600, (A127):
  • [33] Characterization of creep constraint effect for brazed joint specimens at crack tip by new constraint parameter As
    Jiang, Wenchun
    Luo, Yun
    Zhang, Baozhu
    Li, S-H
    Xie, X-F
    Tu, Shan-Tung
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 109
  • [34] Geometry and Material Constraint Effects on Creep Crack Growth Behavior in Welded Joints
    Li, Y.
    Wang, G. Z.
    Xuan, F. Z.
    Tu, S. T.
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2017, 36 (02) : 155 - 162
  • [35] The influence of constraint on creep crack growth in 316H stainless steel
    Bettinson, A
    Nikbin, K
    O'Dowd, NP
    Webster, GA
    STRUCTURAL INTEGRITY IN THE 21ST CENTURY: THE LIFETIME OF PLANT, STRUCTURES AND COMPONENTS: EVALUATION, DESIGN, EXTENSION AND MANAGEMENT, 2000, : 149 - 156
  • [36] Unified correlation of creep crack growth rate with constraint parameter for different materials
    Wang, Kai
    Wang, Guozhen
    Tu, Shantung
    Xuan, Fuzhen
    MATERIALS AT HIGH TEMPERATURES, 2022, 39 (04) : 278 - 289
  • [37] EXPERIMENTAL INVESTIGATION OF IN-PLANE CONSTRAINT AND OUT-OF-PLANE CONSTRAINT EFFECTS ON CREEP CRACK GROWTH
    Tan, Jian-Ping
    Wang, Guo-Zhen
    Xuan, Fu-Zhen
    Tu, Shan-Tung
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, PVP 2012, VOL 5: HIGH-PRESSURE TECHNOLOGY NONDESTRUCTIVE EVALUATION DIVISION, 2012, : 271 - 275
  • [38] Characterization of material constraint effects on creep crack growth for welded joints by a new constraint parameter QM*
    Jing, Hongyang
    Xiong, Yu
    Zhao, Lei
    Xu, Lianyong
    Han, Yongdian
    ENGINEERING FRACTURE MECHANICS, 2021, 258
  • [39] Numerical investigation on the creep crack-tip constraint induced by loading configuration of specimens
    Wang, G. Z.
    Li, B. K.
    Xuan, F. Z.
    Tu, S. T.
    ENGINEERING FRACTURE MECHANICS, 2012, 79 : 353 - 362
  • [40] A DAMAGE MECHANICS APPROACH TO THE PREDICTION OF CREEP CRACK-GROWTH
    WANG, ZD
    WU, DD
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1991, 48 (03) : 305 - 319
12345