Vacuum leak search on the Wendelstein 7-X cryostat vessel

被引:6
|
作者
Baldzuhn, J. [1 ]
Reimer, H. [1 ,2 ]
Biedermann, C. [1 ]
Grote, H. [1 ]
Hathiramani, D. [1 ]
Kornejew, P. [1 ]
Rademann, D. [1 ]
Volzke, O. [1 ]
机构
[1] Max Planck Inst Plasma Phys, D-17491 Greifswald, Germany
[2] Forschungszentrum Julich, D-52425 Julich, Germany
关键词
Vacuum leak search; Superconductor cryostat; Magnetic confinement; STELLARATOR W7-X; COLD TESTS; PHYSICS; COILS;
D O I
10.1016/j.vacuum.2015.02.014
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A new plasma fusion experiment, the Wendelstein 7-X (W7-X) has been built in the Max-Planck Institute for Plasma Physics in Greifswald, Germany. A cryostat vacuum tank, shaped like a torus, hosts 70 superconducting magnetic coils to produce a toroidal magnetic field that will confine a fusion relevant plasma. The cryostat tank has a volume of about 420 m(3) and is equipped with several hundreds of vacuum ports, feed-throughs and service openings. Nested inside the cryostat is the plasma vessel with a volume of about 80 m(3), also shaped like a torus. This plasma vessel is connected to the outside by 254 ports that traverse the cryostat. These ports are needed as access for plasma diagnostics, plasma heating and the supply of cooling media. We report in this paper on the vacuum leak search on the W7-X cryostat, both for the internal piping as well as the integral leak search of the entire vessel against air. This is the initial leak search prior to the first cool-down of W7-X. Emphasis is put on the description of the methods, rather than on the results. The technical commissioning of the cryostat vacuum system within a limited time was the primary task; the emphasis was therefore much more on achieving practical results (the leak-tightness) rather than answering fundamental questions. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:89 / 100
页数:12
相关论文
共 50 条
  • [21] Construction of the vacuum vessels and the magnet supporting structures of Wendelstein 7-X
    Cardella, A.
    Hein, B.
    Hennann, D.
    Koppe, T.
    Missal, B.
    Pilopp, D.
    Reich, J.
    Wanner, M.
    Jenzsch, H.
    Krause, R.
    Ploeckl, B.
    Di Bartolo, G.
    Leher, F.
    Binni, A.
    Segl, J.
    Benito, A.
    Giordano, L.
    Langone, S.
    FUSION ENGINEERING AND DESIGN, 2007, 82 (15-24) : 1911 - 1916
  • [22] Concept for the cryo distribution for the Wendelstein 7-X cryo vacuum pumps
    Nagel, M.
    Ihrke, M.
    Pietsch, M.
    Bosch, H. -S.
    Dhard, C. P.
    Rummel, Th.
    27TH INTERNATIONAL CRYOGENICS ENGINEERING CONFERENCE AND INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE 2018 (ICEC-ICMC 2018), 2019, 502
  • [23] Status of WENDELSTEIN 7-X construction
    Wanner, M
    Erckmann, V
    Feist, JH
    Gardebrecht, W
    Hartmann, D
    Krampitz, R
    Niedermeyer, H
    Renner, H
    Rummel, T
    Schauer, F
    Wegener, L
    Wesner, F
    Müller, GA
    Kasparek, W
    Thumm, M
    Dammertz, G
    NUCLEAR FUSION, 2003, 43 (06) : 416 - 424
  • [24] Project control of WENDELSTEIN 7-X
    Bünde, R
    Gottschewsky, M
    Heinrich, S
    FUSION ENGINEERING AND DESIGN, 2001, 58-59 : 803 - 808
  • [25] Design and construction of WENDELSTEIN 7-X
    Wanner, M
    Feist, JH
    Renner, H
    Sapper, J
    Schauer, F
    Schneider, H
    Erckmann, V
    Niedermeyer, H
    FUSION ENGINEERING AND DESIGN, 2001, 56-57 : 155 - 162
  • [26] Status of Wendelstein 7-X construction
    Wegener, L.
    FUSION ENGINEERING AND DESIGN, 2009, 84 (2-6) : 106 - 112
  • [27] Configuration Management for Wendelstein 7-X
    Brakel, R.
    v. Eeten, P.
    Hartmann, D. A.
    Henkelmann, K.
    Knauer, J.
    Mueller, K.
    Okkenga-Wolf, A.
    Wenzel, U.
    FUSION ENGINEERING AND DESIGN, 2009, 84 (2-6) : 505 - 508
  • [28] Overview of main-mechanical-components and critical manufacturing aspects of the Wendelstein 7-X cryostat
    Koppe, Torsten
    Cardella, A.
    Missal, B.
    Hein, B.
    Krause, R.
    Jenzsch, H.
    Reich, J.
    Leher, F.
    Binni, A.
    Segl, J.
    Camin, R.
    Giordano, L.
    Langone, S.
    Ridzewski, J.
    Corniani, G.
    FUSION ENGINEERING AND DESIGN, 2011, 86 (6-8) : 716 - 719
  • [29] ICRF heating for Wendelstein 7-X
    Wesner, F
    Hartmann, DA
    Birus, D
    Braun, F
    Wendorf, J
    FUSION ENGINEERING AND DESIGN, 2003, 66-68 : 561 - 566
  • [30] Status of Wendelstein 7-X construction
    Feist, JH
    FUSION SCIENCE AND TECHNOLOGY, 2004, 46 (01) : 192 - 199