Vacuum leak search on the Wendelstein 7-X cryostat vessel

被引:6
|
作者
Baldzuhn, J. [1 ]
Reimer, H. [1 ,2 ]
Biedermann, C. [1 ]
Grote, H. [1 ]
Hathiramani, D. [1 ]
Kornejew, P. [1 ]
Rademann, D. [1 ]
Volzke, O. [1 ]
机构
[1] Max Planck Inst Plasma Phys, D-17491 Greifswald, Germany
[2] Forschungszentrum Julich, D-52425 Julich, Germany
关键词
Vacuum leak search; Superconductor cryostat; Magnetic confinement; STELLARATOR W7-X; COLD TESTS; PHYSICS; COILS;
D O I
10.1016/j.vacuum.2015.02.014
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A new plasma fusion experiment, the Wendelstein 7-X (W7-X) has been built in the Max-Planck Institute for Plasma Physics in Greifswald, Germany. A cryostat vacuum tank, shaped like a torus, hosts 70 superconducting magnetic coils to produce a toroidal magnetic field that will confine a fusion relevant plasma. The cryostat tank has a volume of about 420 m(3) and is equipped with several hundreds of vacuum ports, feed-throughs and service openings. Nested inside the cryostat is the plasma vessel with a volume of about 80 m(3), also shaped like a torus. This plasma vessel is connected to the outside by 254 ports that traverse the cryostat. These ports are needed as access for plasma diagnostics, plasma heating and the supply of cooling media. We report in this paper on the vacuum leak search on the W7-X cryostat, both for the internal piping as well as the integral leak search of the entire vessel against air. This is the initial leak search prior to the first cool-down of W7-X. Emphasis is put on the description of the methods, rather than on the results. The technical commissioning of the cryostat vacuum system within a limited time was the primary task; the emphasis was therefore much more on achieving practical results (the leak-tightness) rather than answering fundamental questions. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:89 / 100
页数:12
相关论文
共 50 条
  • [1] Cryostat for Wendelstein 7-X
    不详
    ATW-INTERNATIONALE ZEITSCHRIFT FUR KERNENERGIE, 1998, 43 (05): : 326 - 327
  • [2] Manufacture of cryostat components for Wendelstein 7-X
    Reich, J
    Gardebrecht, W
    Hein, B
    Missal, B
    Starke, F
    Seidler, KU
    FUSION ENGINEERING AND DESIGN, 2003, 69 (1-4) : 345 - 348
  • [3] Manufacturing and assembly of the plasma- and outer vessel of the cryostat for Wendelstein 7-X
    Hein, Bernd
    Cardella, Antonio
    HermannA, Dieter
    Hansen, Andreas
    Leher, Franz
    Binni, Andreas
    Segl, Juergen
    FUSION ENGINEERING AND DESIGN, 2012, 87 (02) : 124 - 127
  • [4] FE simulation of the Wendelstein 7-X cryostat system
    Tereshchenko, A.
    Bykov, V.
    Schauer, F.
    Ye, M. Y.
    Weissflog, S.
    Andreeva, T.
    FUSION ENGINEERING AND DESIGN, 2009, 84 (7-11) : 1833 - 1837
  • [5] First evaluation of cryogenic performance of Wendelstein 7-X cryostat
    Nagel, M.
    Dhard, C. P.
    Bau, H.
    Meyer, U.
    Raatz, S.
    Rummel, T.
    Risse, K.
    Bosch, H. -S.
    FUSION ENGINEERING AND DESIGN, 2017, 123 : 153 - 157
  • [6] Reverse engineering process of cryostat components of Wendelstein 7-X
    Rajna, Tamas
    Herold, Friedemann
    Baylard, Christophe
    FUSION ENGINEERING AND DESIGN, 2009, 84 (7-11) : 1558 - 1561
  • [7] Commissioning of the Wendelstein 7-X in Vessel Control Coils
    Fuellenbach, Frank
    Risse, K.
    Rummel, T.
    Eeten, P. V.
    Carls, A.
    Volzke, O.
    Haas, M.
    Bosch, H. -S.
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2020, 48 (07) : 2635 - 2638
  • [8] The in-vessel components of the experiment WENDELSTEIN 7-X
    Stadler, R.
    Vorkoeper, A.
    Boscary, J.
    Cardella, A.
    Hurd, F.
    Li, Ch.
    Mendelevitch, B.
    Peacock, A.
    Pirsch, H.
    FUSION ENGINEERING AND DESIGN, 2009, 84 (2-6) : 305 - 308
  • [9] Manufacturing and assembly status of main components of the Wendelstein 7-X cryostat
    Koppe, Torsten
    Cardella, A.
    Reich, J.
    Missal, B.
    Hein, B.
    Krause, R.
    Jenzsch, H.
    Hermann, D.
    Schrader, M.
    v. Eeten, P.
    Di Bartolo, G.
    Leher, F.
    Binni, A.
    Segl, J.
    Camin, R.
    Giordano, L.
    Egloff, B.
    Ridzewski, J.
    Corniani, Giorgio
    FUSION ENGINEERING AND DESIGN, 2009, 84 (7-11) : 1099 - 1103
  • [10] Manufacturing and assembly status of main components of the Wendelstein 7-X Cryostat
    Koppe, Torsten
    Cardella, A.
    Reich, J.
    Missal, B.
    Hein, B.
    Krause, R.
    Jenzsch, H.
    Hermann, D.
    Schrader, M.
    Di Bartolo, G.
    Leher, F.
    Binni, A.
    Segl, J.
    Camin, R.
    Giordano, L.
    Langone, S.
    Ridzewski, J.
    Corniani, Giorgio
    2009 23RD IEEE/NPSS SYMPOSIUM ON FUSION ENGINEERING, 2009, : 341 - +