Effect of Temperature Variation on Wear Behaviour of Austenitic Stainless Steel

被引:2
|
作者
Alias, S. K. [1 ]
Ahmad, S. [1 ]
Abdullah, B. [1 ]
Pahroraji, H. F. [1 ]
Hamami, G. [1 ]
机构
[1] Univ Teknol MARA Johor, Fac Mech Engn, Masai 81750, Johor, Malaysia
关键词
AISI; 4140; KINETICS;
D O I
10.1088/1757-899X/160/1/012026
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effects of boronizing temperatures on the wear and hardness properties of austenitic stainless steel were investigated in this study. The samples were prepared in accordance to standard samples preparation for wear and hardness test. Pack boronizing were conducted using EKabor (R) 1 powder medium at two different temperatures which are 850 degrees C and 950 degrees C. The wear resistance properties were evaluated though pin on disk test and the surface characterization was analyzed through scanning electron microscopy (SEM), observation. Vickers microhardness tester was performed to obtain the hardness of the samples. The results indicated that there are presences of FeB and Fe2B phases on both samples, but thicker FeB phase was produced at Po-950 samples. This resulted in reduction of abrasion wear properties but major improvement of the hardness properties of boronized stainless steel.
引用
收藏
页数:5
相关论文
共 50 条
  • [31] Effect of ageing time on the creep behaviour of NiAl hardened austenitic stainless steel
    Satyanarayana, DVV
    Malakondaiah, G
    Sarma, DS
    [J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2000, 53 (03): : 243 - 248
  • [32] Effect of annealing on corrosion behaviour of nitrogen S phase in austenitic stainless steel
    Li, XY
    Dong, H
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2003, 19 (10) : 1427 - 1434
  • [33] Effect of nitrogen doping on sliding wear behaviour of stainless steel coatings
    Sun, Y
    Kappaganthu, SR
    [J]. TRIBOLOGY LETTERS, 2004, 17 (04) : 845 - 850
  • [34] Effect of intermetallic particles on wear behaviour of stainless steel matrix composites
    Velasco, F
    Lima, WM
    Antón, N
    Abenójar, J
    Torralba, JM
    [J]. TRIBOLOGY INTERNATIONAL, 2003, 36 (07) : 547 - 551
  • [35] TEMPERATURE EFFECT OF Xe ION IRRADIATION TO 316 AUSTENITIC STAINLESS STEEL
    Huang Hefei
    Li Jianjian
    Liu Renduo
    Chen Huaican
    Yan Long
    [J]. ACTA METALLURGICA SINICA, 2014, 50 (10) : 1189 - 1194
  • [36] High-Temperature Oxidation Behaviour of CrSi Coatings on 316 Austenitic Stainless Steel
    Gurtaran, Mikdat
    Zhang, Zhenxue
    Li, Xiaoying
    Dong, Hanshan
    [J]. MATERIALS, 2023, 16 (09)
  • [37] Influence of temperature on multiaxial creep behaviour of 304HCu austenitic stainless steel
    Sahoo, K. C.
    Vijayanand, V. D.
    Goyal, Sunil
    Parameswaran, P.
    Laha, K.
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2019, 35 (18) : 2181 - 2199
  • [38] High-temperature oxidation behaviour of nanostructure surface layered austenitic stainless steel
    Singh, Digvijay
    Cemin, Felipe
    Jimenez, Mawin J. M.
    Antunes, Vinicius
    Alvarez, Fernando
    Orlov, Dmytro
    Figueroa, Carlos A.
    Hosmani, Santosh S.
    [J]. APPLIED SURFACE SCIENCE, 2022, 581
  • [39] The influence of temperature on the corrosion behaviour of high nitrogen austenitic stainless steel in chloride media
    Tzaneva, B. R.
    [J]. BULGARIAN CHEMICAL COMMUNICATIONS, 2014, 46 (02): : 378 - 383
  • [40] Behaviour of austenitic stainless steel bolts at elevated temperatures
    Wang, Hui
    Hu, Ying
    Wang, Xing-Qiang
    Tao, Zhong
    Tang, Sheng-Lin
    Pang, Xiao-Ping
    Chen, Yohchia Frank
    [J]. ENGINEERING STRUCTURES, 2021, 235