Effect of Temperature Variation on Wear Behaviour of Austenitic Stainless Steel

被引：2
|
作者：
Alias, S. K. [1 ]
Ahmad, S. [1 ]
Abdullah, B. [1 ]
Pahroraji, H. F. [1 ]
Hamami, G. [1 ]
机构：
[1] Univ Teknol MARA Johor, Fac Mech Engn, Masai 81750, Johor, Malaysia
来源：
INTERNATIONAL ENGINEERING RESEARCH AND INNOVATION SYMPOSIUM (IRIS) | 2016年 / 160卷
关键词：
AISI; 4140; KINETICS;
D O I：
10.1088/1757-899X/160/1/012026
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of boronizing temperatures on the wear and hardness properties of austenitic stainless steel were investigated in this study. The samples were prepared in accordance to standard samples preparation for wear and hardness test. Pack boronizing were conducted using EKabor (R) 1 powder medium at two different temperatures which are 850 degrees C and 950 degrees C. The wear resistance properties were evaluated though pin on disk test and the surface characterization was analyzed through scanning electron microscopy (SEM), observation. Vickers microhardness tester was performed to obtain the hardness of the samples. The results indicated that there are presences of FeB and Fe2B phases on both samples, but thicker FeB phase was produced at Po-950 samples. This resulted in reduction of abrasion wear properties but major improvement of the hardness properties of boronized stainless steel.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Effect of Heat Treatment on Wear Behaviour of Austenitic Stainless Steel
    Khan, Waris Nawaz
    Furkan
    Chhibber, Rahul
    [J]. MACHINES, MECHANISM AND ROBOTICS, INACOMM 2019, 2022, : 1703 - 1711
  • [2] Corrosion wear behaviour of low temperature plasma alloyed 316 austenitic stainless steel
    Thaiwatthana, S
    Li, XY
    Dong, H
    Bell, T
    [J]. SURFACE ENGINEERING, 2003, 19 (03) : 211 - 216
  • [3] Plastic behaviour of austenitic stainless steel at low temperature
    Baptista Antunes, Augusto Eduardo
    Doi Antunes, Lidia Mikiko
    [J]. REM-REVISTA ESCOLA DE MINAS, 2007, 60 (01) : 141 - 147
  • [4] Wear behaviour of low-temperature gas nitrided austenitic stainless steel in a corrosive liquid environment
    Baranowska, J.
    Franklin, S. E.
    Kochmanska, A.
    [J]. WEAR, 2007, 263 : 669 - 673
  • [5] Effect of nitriding temperature and its effects on the corrosion and wear resistance of 304 austenitic stainless steel
    Peng, Tianxiang
    Wang, Liang
    [J]. SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2023, 11 (03)
  • [6] Effect of multiple laser peening on microstructural, fatigue and fretting-wear behaviour of austenitic stainless steel
    Praveenkumar, K.
    Swaroop, S.
    Manivasagam, Geetha
    [J]. SURFACE & COATINGS TECHNOLOGY, 2022, 443
  • [7] Low-temperature carburised AISI 316L austenitic stainless steel: Wear and corrosion behaviour
    Ceschini, L.
    Chiavari, C.
    Lanzoni, E.
    Martini, C.
    [J]. MATERIALS & DESIGN, 2012, 38 : 154 - 160
  • [8] Temperature Effect on Deformation Response in Austenitic Stainless Steel
    Barannikova, Svetlana A.
    Iskhakova, Polina V.
    [J]. Defect and Diffusion Forum, 2022, 419 : 103 - 108
  • [9] Work Hardening and Tensile Behaviour of an Austenitic Stainless Steel at High Temperature
    Angella, Giuliano
    [J]. THERMEC 2009, PTS 1-4, 2010, 638-642 : 2973 - 2978
  • [10] ABRASIVE WEAR OF AUSTENITIC STAINLESS-STEEL
    DOYLE, ED
    DEAN, SK
    [J]. METALS FORUM, 1981, 4 (04): : 235 - 240
12345