Pressure, Feed Rate, and Abrasive Mass Flow Rate Influence on Surface Roughness for Recombinant Bamboo Abrasive Water Jet Cutting

被引：6
|
作者：
Li, Rongrong [1 ]
Ekevad, Mats [2 ]
Guo, Xiaolei [1 ]
Cao, Pingxiang [1 ]
Wang, Jie [1 ]
Chen, Qingqing [1 ]
Xue, Hong [1 ]
机构：
[1] Nanjing Forestry Univ, Fac Mat Sci & Engn, Nanjing 210037, Jiangsu, Peoples R China
[2] Lulea Univ Technol, Div Wood Sci & Engn, S-93187 Skelleftea, Sweden
来源：
BIORESOURCES | 2015年 / 10卷 / 02期
关键词：
Recombinant bamboo; Response surface methodology; Abrasive water jet; Surface roughness; CHOSEN PARAMETERS;
D O I：
10.15376/biores.10.2.1998-2008
中图分类号：
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号：
0805 ; 080502 ; 0822 ;
摘要：
The effects of pressure, feed rate, and abrasive mass flow rate on surface roughness were investigated during abrasive water cutting of recombinant bamboo. Two different thicknesses (10 mm and 15 mm) of recombinant bamboo were cut in the longitudinal and transversal directions by abrasive water jet. All experiments were arranged using response surface methodology. The parameter R-a was selected to represent the surface roughness. The value of Ra increased with an increase in feed rate and abrasive mass flow rate, but decreased with an increase in pressure. The surface roughness was lower when cutting the fiber longitudinally than when cutting transversally.
引用
下载
收藏
页码：1998 / 2008
页数：11
相关论文
共 50 条
  • [31] Study on cutting speed and energy utilization rate in processing stainless steel with abrasive water jet
    Qiang, Chiheng
    Wang, Fengchao
    Guo, Chuwen
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 108 (5-6): : 1875 - 1886
  • [32] Modelling the Kerf Angle, Roughness and Waviness of the Surface of Inconel 718 in an Abrasive Water Jet Cutting Process
    Plodzien, Marcin
    Zylka, Lukasz
    Zak, Krzysztof
    Wojciechowski, Szymon
    MATERIALS, 2023, 16 (15)
  • [33] Influence of Abrasive Water Jet Parameters on Steel Surface
    Rui Guo
    Cunlong Zhou
    Shengnan Yuan
    JOM, 2020, 72 : 4273 - 4280
  • [34] Influence of Abrasive Water Jet Parameters on Steel Surface
    Guo, Rui
    Zhou, Cunlong
    Yuan, Shengnan
    JOM, 2020, 72 (12) : 4273 - 4280
  • [35] INVESTIGATION SURFACE ROUGHNESS AND CHARACTERIZATION OF CUTTING FRONT SIDE GEOMETRY IN THE CUTTING OF AISI 1030 MATERIAL WITH ABRASIVE WATER JET
    Akkurt, Adnan
    PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2009, 15 (01): : 1 - 11
  • [36] Multiphase Flow and Wear in the Cutting Head of Ultra-high Pressure Abrasive Water Jet
    YANG Minguan
    Chinese Journal of Mechanical Engineering, 2009, 22 (05) : 729 - 734
  • [37] Multiphase Flow and Wear in the Cutting Head of Ultra-high Pressure Abrasive Water Jet
    Yang Minguan
    Wang Yuli
    Kang Can
    Yu Feng
    CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2009, 22 (05) : 729 - 734
  • [38] Surface roughness and erosion rate of abrasive jet micro-machined channels: Experiments and analytical model
    Jafar, R. Haj Mohammad
    Spelt, J. K.
    Papini, M.
    WEAR, 2013, 303 (1-2) : 138 - 145
  • [39] Study of influence of traverse speed and abrasive mass flowrate in abrasive water jet machining of gemstones
    Carlos Edmundo de Abreu e Lima
    Rodrigo Lebrón
    André João de Souza
    Ney Francisco Ferreira
    Patric Daniel Neis
    The International Journal of Advanced Manufacturing Technology, 2016, 83 : 77 - 87
  • [40] Study of influence of traverse speed and abrasive mass flowrate in abrasive water jet machining of gemstones
    de Abreu e Lima, Carlos Edmundo
    Lebron, Rodrigo
    de Souza, Andre Joao
    Ferreira, Ney Francisco
    Neis, Patric Daniel
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 83 (1-4): : 77 - 87
12345