Pressure, Feed Rate, and Abrasive Mass Flow Rate Influence on Surface Roughness for Recombinant Bamboo Abrasive Water Jet Cutting

被引：6
|
作者：
Li, Rongrong [1 ]
Ekevad, Mats [2 ]
Guo, Xiaolei [1 ]
Cao, Pingxiang [1 ]
Wang, Jie [1 ]
Chen, Qingqing [1 ]
Xue, Hong [1 ]
机构：
[1] Nanjing Forestry Univ, Fac Mat Sci & Engn, Nanjing 210037, Jiangsu, Peoples R China
[2] Lulea Univ Technol, Div Wood Sci & Engn, S-93187 Skelleftea, Sweden
来源：
BIORESOURCES | 2015年 / 10卷 / 02期
关键词：
Recombinant bamboo; Response surface methodology; Abrasive water jet; Surface roughness; CHOSEN PARAMETERS;
D O I：
10.15376/biores.10.2.1998-2008
中图分类号：
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号：
0805 ; 080502 ; 0822 ;
摘要：
The effects of pressure, feed rate, and abrasive mass flow rate on surface roughness were investigated during abrasive water cutting of recombinant bamboo. Two different thicknesses (10 mm and 15 mm) of recombinant bamboo were cut in the longitudinal and transversal directions by abrasive water jet. All experiments were arranged using response surface methodology. The parameter R-a was selected to represent the surface roughness. The value of Ra increased with an increase in feed rate and abrasive mass flow rate, but decreased with an increase in pressure. The surface roughness was lower when cutting the fiber longitudinally than when cutting transversally.
引用
下载
收藏
页码：1998 / 2008
页数：11
相关论文
共 50 条
  • [1] Effect of Pressure, Feed Rate, and Abrasive Mass Flow Rate on Water Jet Cutting Efficiency When Cutting Recombinant Bamboo
    Li, Rongrong
    Ekevad, Mats
    Guo, Xiaolei
    Ding, Jianwen
    Cao, Pingxiang
    BIORESOURCES, 2015, 10 (01): : 499 - 509
  • [2] Determination of vibration frequency depending on abrasive mass flow rate during abrasive water jet cutting
    Pavol Hreha
    Agáta Radvanská
    Sergej Hloch
    Vincent Peržel
    Grzegorz Królczyk
    Katarína Monková
    The International Journal of Advanced Manufacturing Technology, 2015, 77 : 763 - 774
  • [3] Determination of vibration frequency depending on abrasive mass flow rate during abrasive water jet cutting
    Hreha, Pavol
    Radvanska, Agata
    Hloch, Sergej
    Perzel, Vincent
    Krolczyk, Grzegorz
    Monkova, Katarina
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 77 (1-4): : 763 - 774
  • [4] Effect of feed rate on surface roughness in abrasive waterjet cutting applications
    Akkurt, A
    Kulekci, MK
    Seker, U
    Ercan, F
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 147 (03) : 389 - 396
  • [5] Effect of Abrasive Flow Rate in Milling with Abrasive Water Jet
    Pal, Vijay Kumar
    Tandon, Puneet
    MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 196 - 201
  • [6] Investigation on Feed Rate Influence on Surface Quality in Abrasive Water Jet Cutting of Composite Materials, Monitoring Acoustic Emissions
    Popan, Ioan Alexandru
    Bocanet, Vlad
    Balc, Nicolae
    Popan, Alina Ioan
    ADVANCES IN MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2018, 2019, : 105 - 113
  • [7] Experimental Study on Surface Roughness in Abrasive Water Jet Cutting
    Begic-Hajdarevic, Derzija
    Cekic, Ahmet
    Mehmedovic, Muhamed
    Djelmic, Almina
    25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014, 2015, 100 : 394 - 399
  • [8] Effect of Abrasive Feed Rate on Rock Cutting Performance of Abrasive Waterjet
    Oh, Tae-Min
    Joo, Gun-Wook
    Cho, Gye-Chun
    ROCK MECHANICS AND ROCK ENGINEERING, 2019, 52 (09) : 3431 - 3442
  • [9] Effect of Abrasive Feed Rate on Rock Cutting Performance of Abrasive Waterjet
    Tae-Min Oh
    Gun-Wook Joo
    Gye-Chun Cho
    Rock Mechanics and Rock Engineering, 2019, 52 : 3431 - 3442
  • [10] Impact of Pressure on Surface Roughness and Kerf Characteristics Using Low Pressure Abrasive Water Jet Cutting
    Mokhtar, Nazrin
    Qutaba, Syed
    Asmelash, Mebrahitom
    Azhari, Mohd Azmir
    SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY, 2024, 60 (01) : 129 - 141
12345