How ultra high frequency of pulsed gas tungsten arc welding affects weld porosity of Ti-6Al-4V alloy

被引：33

作者：

Yang, Mingxuan ^{[1
]}

Yang, Zhou ^{[1
]}

Cong, Baoqiang ^{[1
]}

Qi, Bojin ^{[1
]}

机构：

[1] Beijing Univ Aeronaut & Astronaut, Dept Mat Proc, Beijing 100191, Peoples R China

来源：

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2015年 / 76卷 / 5-8期

基金：

中国国家自然科学基金;

关键词：

Ultra high frequency pulsed welding; Weld porosity; Molten pool; Titanium alloy; TITANIUM;

D O I：

10.1007/s00170-014-6324-3

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Ultra high frequency of pulsed gas tungsten arc welding (UHFP-GTAW) has been considered as a promising method to improve weld quality of titanium alloys. This paper studies the effect of UHFP-GTAW on weld porosity of Ti-6Al-4V alloy, which shows how liquid pressure/viscosity/temperature of molten pool influences nucleation, growth, detaching, and escaping of gas pore. Results indicated that compared to conventional GTAW, the liquid pressure and curvature radius of the gas pore were increased significantly while viscosity and filtration angle of the gas pore reduced simultaneously caused by UHFP-GTAW, leading to high escaping speed and easy detaching process of the weld gas pore. It is suggested that the elimination of weld porosity of Ti-6Al-4V alloy can be achieved by UHFP-GTAW process.

引用

页码：955 / 960

页数：6

共 50 条

[21] Developing mathematical models to predict tensile properties of pulsed current gas tungsten arc welded Ti-6Al-4V alloy
Balasubramanian, M.
Jayabalan, V.
Balasubramanian, V.
MATERIALS & DESIGN, 2008, 29 (01) : 92 - 97
[22] Comparative study on impact toughness of gas tungsten arc and electron beam weld metals of Ti-6Al-4V
Mater Sci Technol, 12 (1057):
[23] Comparative study on impact toughness of gas tungsten arc and electron beam weld metals of Ti-6Al-4V
Radhakrishna, C
Rao, KP
MATERIALS SCIENCE AND TECHNOLOGY, 1997, 13 (12) : 1057 - 1062
[24] Vertical-Up Gas Tungsten Arc Welding of Ti6Al4V Alloy and Characterization
Gupta, R. K.
Panicker, Paul G.
Paul, Vinu
Radhakrishnan, G.
Rajesh, L.
Rajesh, V.
Ramkumar, P.
Gopinath, Shibu
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2016, 138 (02):
[25] High temperature tensile properties and microstructural characterization of gas tungsten constricted arc welded Ti-6Al-4V alloy
Vaithiyanathan, V.
Balasubramanian, V
Malarvizhi, S.
Vijay, Petley
Gourav, Rao A.
MATERIALS RESEARCH EXPRESS, 2019, 6 (09)
[26] Characterization and Mechanism of α2-Ti3Al and γ-TiAl precipitation in Ti-6Al-4V Alloy following Tungsten Arc Welding
Wang, L. M.
Lin, H. C.
Tsai, C. J.
POWDER METALLURGY OF TITANIUM: POWDER PROCESSING, CONSOLIDATION AND METALLURGY OF TITANIUM, 2012, 520 : 320 - +
[27] Mechanism of surface modification of the Ti-6Al-4V alloy using a gas tungsten arc heat source
M. Labudovic
R. Kovacevic
I. Kmecko
T. I. Khan
D. Blecic
Z. Blecic
Metallurgical and Materials Transactions A, 1999, 30 : 1597 - 1603
[28] Study of high frequency pulsed arc on molten pool thermal properties of Ti-6Al-4V
Li Ling
Yang Mingxuan
Qi Bojin
Liu Heng
JOURNAL OF MANUFACTURING PROCESSES, 2019, 38 : 308 - 312
[29] Welding of Ti-6Al-4V alloy using dynamically controlled plasma arc welding process
Chen Jian-chun
Pan Chun-xu
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (07) : 1506 - 1512
[30] A Comparative Study on Direct and Pulsed Current Micro-plasma Arc Welding of Alloy Ti-6Al-4V
Rahimi, Amirkeyvan
Shamanian, Morteza
Rahimi, Ahmadreza
Kangazian, Jalal
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (12) : 3103 - 3110

← 1 2 3 4 5 →