Microstructural development during spark plasma sintering of ZrB2-SiC-Ti composite

被引：86

作者：

Ghasali, Ehsan ^{[1
]}

Asl, Mehdi Shahedi ^{[2
]}

机构：

[1] Mat & Energy Res Ctr, Dept Ceram, Alborz, Iran

[2] Univ Mohaghegh Ardabili, Dept Mech Engn, Ardebil, Iran

来源：

CERAMICS INTERNATIONAL | 2018年 / 44卷 / 15期

关键词：

ZrB2-SiC composite; Spark plasma sintering; Ti addition; Microstructure; Phase evolution; In-situ formed compounds; HOT-PRESSING PARAMETERS; MECHANICAL-PROPERTIES; ZRB2-BASED COMPOSITES; FRACTOGRAPHICAL CHARACTERIZATION; ZRO2/SIC RATIO; C-SF; DENSIFICATION; HARDNESS; ZRB2; TEMPERATURE;

D O I：

10.1016/j.ceramint.2018.07.011

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The present study investigates the effect of Ti addition on the microstructure development and phase evolution during spark plasma sintering of ZrB2-SiC ceramic composite. A ZrB2-20 vol% SiC sample with 15 wt% Ti was prepared by high-energy milling and spark plasma sintering at 2000 degrees C for 7 min under 50 MPa. The X-ray diffraction test, microstructural studies and thermodynamic assessments indicated the in-situ formation of several compounds due to the chemical reactions of Ti with ZrB2 and SiC. The Ti additive was completely consumed during the sintering process and converted to the ceramic compounds of TiC, TiB and TiSi2. In addition, another refractory phase of ZrC was also formed as a result of sidelong reaction of ZrB2 and SiC with the Ti additive.

引用

页码：18078 / 18083

页数：6

共 50 条

[31] Machinable ZrB2-SiC-BN composites fabricated by reactive spark plasma sintering
Wu, Wen-Wen
Estili, Mehdi
Nishimura, Toshiyuki
Zhang, Guo-Jun
Sakka, Yoshio
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 582 : 41 - 46
[32] Effect of SiC and TiC Reinforcements on the Mechanical Properties of ZrB2- SiC- TiC Hybrid Composite Fabricated Through Spark Plasma Sintering
V. S. S. Venkatesh
Kalapala Prasad
Lokeswar Patnaik
Silicon, 2023, 15 : 3339 - 3351
[33] Effect of SiC and TiC Reinforcements on the Mechanical Properties of ZrB2- SiC- TiC Hybrid Composite Fabricated Through Spark Plasma Sintering
Venkatesh, V. S. S.
Prasad, Kalapala
Patnaik, Lokeswar
SILICON, 2023, 15 (07) : 3339 - 3351
[34] Spark plasma sintering of B4C-ZrB2 and B4C-ZrB2-SiC ceramics
Cheng, Y. H.
Han, W. B.
Liu, D. Z.
An, J. D.
Wang, P.
Zhao, G. D.
MATERIALS RESEARCH INNOVATIONS, 2015, 19 : S343 - S346
[35] ZrB2-SiC-WC coating with SiC diffusion bond coat on graphite by spark plasma sintering process
Shirani, M.
Rahimipour, M.
Zakeri, M.
Safi, S.
Ebadzadeh, T.
CERAMICS INTERNATIONAL, 2017, 43 (16) : 14517 - 14520
[36] HfB2-SiC composite prepared by reactive spark plasma sintering
Wang, Hailong
Lee, Sea-Hoon
Feng, Lun
CERAMICS INTERNATIONAL, 2014, 40 (07) : 11009 - 11013
[37] Mechanical properties and ablation behavior of ZrB2-SiC ceramics fabricated by spark plasma sintering
Zhang, Xiang
Liu, Rutie
Xiong, Xiang
Chen, Zhaoke
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 : 120 - 125
[38] Effects of temperature and pressure on properties of SiC-ZrB2 composites prepared by spark plasma sintering
Lee, Jung-Hoon
Jin, Beom-Soo
Kang, Myeong-Kyun
Kim, In-Yong
Jeon, An-Gyun
Park, Jin-Hyoung
Kim, Dong-Ki
Shin, Yong-Deok
JOURNAL OF CERAMIC PROCESSING RESEARCH, 2013, 14 (04): : 577 - 582
[39] Effect of holding time and pressure on properties of ZrB2-SiC composite fabricated by the spark plasma sintering reactive synthesis method
Zhao, Yuan
Wang, Lian-Jun
Zhang, Guo-Jun
Jiang, Wan
Chen, Li-Dong
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (01): : 177 - 180
[40] Rapid fabrication and reaction process of ZrB2-SiC composites by spark plasma sintering process
Zhao Yuan
Wang Lianjun
Zhang Guojun
Chen Lidong
Jiang Wan
RARE METAL MATERIALS AND ENGINEERING, 2007, 36 : 819 - 822

← 1 2 3 4 5 →