Control of the morphology of CSD-prepared (Ba,Sr)TiO3 thin films

被引：161
|
作者：
Hoffmann, S [1 ]
Waser, R
机构：
[1] Forschungszentrum Julich, Inst Festkorperforsch, Julich, Germany
[2] Univ Technol, Rhein Westfal TH Aachen, Inst Werkstoffe Elektrotech, Aachen, Germany
来源：
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 1999年 / 19卷 / 6-7期
关键词：
films; precursors-organic; B; microstructure-final; dielectric properties; BaTiO3 and titanates;
D O I：
10.1016/S0955-2219(98)00430-0
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The influence of precursor chemistry and deposition process conditions on the morphology of CSD-prepared (Ba,Sr) TiO3 thin films was investigated. By controlling the film formation process, the morphology of (Ba,Sr) TiO3 films grown on platinum coated silicon substrates at temperatures around 750 degrees C was tailored in order to achieve columnar grain structures. We extend the thermodynamic model for the nucleation process in Pb(Zr,Ti)O-3 thin films to the explanation of the crystallization behavior of (Ba,Sr)TiO3 thin films. The influence of the thin film microstructure on the dielectric proper ties is discussed with respect to the Curie-Weiss behavior of different BaTiO3 films. (C) 1999 Elsevier Science Limited All rights reserved.
引用
收藏
页码：1339 / 1343
页数：5
相关论文
共 50 条
  • [41] Pyroelectric coefficient optimization through grain size control in (Ba,Sr)TiO3 thin films
    Schloss, LF
    Haller, EE
    MATERIALS SCIENCE OF NOVEL OXIDE-BASED ELECTRONICS, 2000, 623 : 119 - 124
  • [42] Cation composition control of MOCVD (Ba,Sr) TiO3 thin films along the capacitor hole
    Hwang, CS
    No, SY
    Park, J
    Kim, HJ
    Cho, HJ
    Han, YK
    Oh, KY
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2002, 149 (10) : G585 - G592
  • [43] Investigation of (Ba,Sr)TiO3 Based Thick Films Prepared by Inkjet Printing
    Sakai, Y.
    Futakuchi, T.
    Adachi, M.
    2008 17TH IEEE INTERNATIONAL SYMPOSIUM ON THE APPLICATIONS OF FERROELECTRICS, 2008, : 234 - +
  • [44] Microstructural control of (Ca,Sr)RuO3 electrode and the related properties of (Ba,Sr)TiO3 thin films
    Son, SY
    Kim, BS
    Choi, DK
    Lee, KS
    Dai, ZR
    Ohuchi, FS
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 1998, 32 : S1517 - S1520
  • [45] Post-annealing in oxygen ambient for (Ba,Sr)TiO3 thin films prepared by pulsed laser deposition
    Kim, SG
    Mah, SB
    Jang, NW
    Paik, DS
    Park, CY
    MATERIALS LETTERS, 2000, 43 (5-6) : 254 - 258
  • [46] Characterization of (Ba,Sr)TiO3 thin films on BaPbO3 electrode prepared by radio frequency magnetron sputtering
    Liang, CS
    Wu, JM
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2005, 152 (12) : F213 - F216
  • [47] Electrical properties of sputtered (Ba,Sr)TiO3 thin films prepared by two-step deposition method
    Lee, BT
    Kim, WD
    Lee, KH
    Lim, HJ
    Kang, CS
    Hideki, H
    Joo, SH
    Park, HB
    Yoo, CY
    Lee, SI
    Lee, MY
    JOURNAL OF ELECTRONIC MATERIALS, 1999, 28 (04) : L9 - L12
  • [48] The fabrication and characteristics of (Ba0.5Sr0.5)TiO3 thin films prepared by pulsed laser deposition
    Yang, GA
    Gu, HS
    Zhu, J
    Wang, YQ
    JOURNAL OF CRYSTAL GROWTH, 2002, 242 (1-2) : 172 - 176
  • [49] Electrical properties of sputtered (Ba, Sr)TiO3 thin films prepared by two-step deposition method
    Byoung Taek Lee
    Wan Don Kim
    Ki Hoon Lee
    Han Jin Lim
    Chang Seok Kang
    Horii Hideki
    Suk Ho Joo
    Hong Bae Park
    Cha Young Yoo
    Sang In Lee
    Moon Yong Lee
    Journal of Electronic Materials, 1999, 28 : L9 - L12
  • [50] Properties of (Ba,Sr)TiO3 thin films prepared by liquid-source delivery chemical vapor deposition
    Kim, DC
    Jo, W
    Lee, HM
    Kim, KY
    INTEGRATED FERROELECTRICS, 1997, 18 (1-4) : 137 - 144
12345