Effect of surface modification on the stability of oxide scales formed on TiAl intermetallic alloys at high temperature

被引：5
|
作者：
Pilone, D. [1 ]
Brotzu, A. [1 ]
Felli, F. [1 ]
机构：
[1] Sapienza Univ Roma, Dept ICMA, Via Eudossiana 18, I-00184 Rome, Italy
来源：
21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21) | 2016年 / 2卷
关键词：
TiAl intermetallics; oxidation; surface modification; OXIDATION BEHAVIOR; ALUMINUM-ALLOY; CORROSION-RESISTANCE; CONVERSION COATINGS; PHOSPHORIC-ACID; TI-6AL-4V; ELEMENTS;
D O I：
10.1016/j.prostr.2016.06.287
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
TiAl intermetallic alloys have many interesting potential applications in the automotive and aerospace industry due to their low density and good mechanical properties at high temperature. Unfortunately they have a low oxidation resistance at temperature higher than 700 degrees C and the improvement of their oxidation behavior is still an open issue. In this work the surface of a TiA1CrNb alloy has been modified by means of either anodic coating or cerium conversion coating. Afterwards the stability of the oxide scale formed at 900 degrees C has been studied by analyzing crack formation and propagation, which is the phenomenon that can produce scale spallation during the alloy cooling. Copyright (C) 2016 The Authors. Published by Elsevier B.V.
引用
收藏
页码：2291 / 2298
页数：8
相关论文
共 50 条
  • [21] The Role of Surface Protection for High-Temperature Performance of TiAl Alloys
    Michael Schütze
    JOM, 2017, 69 : 2602 - 2609
  • [22] Development of High Temperature TiAl Alloys
    Lin, J. P.
    Yang, F.
    Ding, X. F.
    Zhao, L. L.
    Chen, G. L.
    He, Y. H.
    TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL II, 2012, : 1357 - 1362
  • [23] HIGH TEMPERATURE DEFORMATION BEHAVIOR OF TiAl INTERMETALLIC COMPOUND
    HAO Shiming ZHENG Zhanqing Northeast University of Technology
    Acta Metallurgica Sinica(English Letters), 1990, (12) : 415 - 419
  • [24] Surface modification of γ-TiAl alloys by acetylene plasma deposition
    Narksitipan, Suparut
    Thongtem, Titipun
    McNallan, Michael
    Thongtem, Somchai
    APPLIED SURFACE SCIENCE, 2006, 252 (24) : 8510 - 8513
  • [25] SURFACE MODIFICATION OF INTERMETALLIC COMPOUND TIAL BY NITROGEN ION-IMPLANTATION
    MATSUSHIMA, T
    SAITO, K
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1993, 57 (03) : 325 - 331
  • [26] Growth Stresses in the Oxide Scales on TiAl Alloys at 800 and 900°C
    W. Przybilla
    M. Schütze
    Oxidation of Metals, 2002, 58 : 337 - 359
  • [27] Growth stresses in the oxide scales on TiAl alloys at 800 and 900°C
    Przybilla, W
    Schütze, M
    OXIDATION OF METALS, 2002, 58 (3-4): : 337 - 359
  • [28] THE FORMATION OF ALUMINUM-OXIDE SCALES ON HIGH-TEMPERATURE ALLOYS
    PRESCOTT, R
    GRAHAM, MJ
    OXIDATION OF METALS, 1992, 38 (3-4): : 233 - 254
  • [29] Enhancement of creep properties and microstructural stability of intermetallic β-solidifying γ-TiAl based alloys
    Kastenhuber, M.
    Rashkova, B.
    Clemens, H.
    Mayer, S.
    INTERMETALLICS, 2015, 63 : 19 - 26
  • [30] PROCEDURES FOR QUANTITATIVE REMOVAL OF OXIDE SCALES FORMED IN HIGH TEMPERATURE WATER AND STEAM
    不详
    MATERIALS PROTECTION, 1967, 6 (07): : 69 - &
12345