Environmental fatigue of unidirectional glass-carbon fiber reinforced hybrid composite

被引:42
|
作者
Shan, Y [1 ]
Liao, K [1 ]
机构
[1] Nanyang Technol Univ, Sch Mat Engn, Singapore 639798, Singapore
关键词
hybrid; environmental degradation; fatigue;
D O I
10.1016/S1359-8368(01)00014-2
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Unidirectional glass fiber reinforced and glass-carbon fiber reinforced (glass to carbon fiber volume ratio 3:1) epoxy matrix composite samples were subjected to tension-tension fatigue in air and in distilled water at 25 degreesC. While no significant change in fatigue Life was observed for both types of samples tested in air and in water when cyclically tested at 85% of average ultimate tensile strength (UTS), the detrimental effect of water becomes apparent at lower stress levels of 65 and 45% UTS. Compared to samples tested in air, cyclic loading in water results in shorter fatigue lives for both glass and hybrid samples. While all of the glass fiber composite samples did not survive to 10(6) cycles when loaded in water, hybrid samples showed better retention in structural integrity under environmental fatigue for lives up to 10(7) cycles, a consequence of the corrosion resistant of carbon fiber. Thus, by incorporating appropriate amount of carbon fibers in glass fiber composite, a much better performance in fatigue can be achieved for glass-carbon hybrid composite. (C) 2001 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:355 / 363
页数:9
相关论文
共 50 条
  • [41] Prediction of cutting forces in machining of unidirectional glass fiber reinforced plastics composite
    Gill S.K.
    Gupta M.
    Satsangi P.S.
    [J]. Frontiers of Mechanical Engineering, 2013, 8 (2) : 187 - 200
  • [42] Drilling unidirectional glass fiber-reinforced composite materials at high speed
    Lin, SC
    Shen, JM
    [J]. JOURNAL OF COMPOSITE MATERIALS, 1999, 33 (09) : 827 - 851
  • [43] Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites
    Zhang, Yongli
    Li, Yan
    Ma, Hao
    Yu, Tao
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2013, 88 : 172 - 177
  • [44] Experimental Study on the Flexural Creep Behaviors of Pultruded Unidirectional Carbon/Glass Fiber-Reinforced Hybrid Bars
    Mayookh Lal, Hiran
    Xian, Guijun
    Thomas, Sabu
    Zhang, Lei
    Zhang, Zhonghui
    Wang, Huili
    [J]. MATERIALS, 2020, 13 (04)
  • [45] MULTIOBJECTIVE OPTIMIZATION FOR UNIDIRECTIONAL GLASS AND CARBON FIBER-REINFORCED HYBRID EPOXY COMPOSITES UNDER FLEXURAL LOADING
    Dong, Chensong
    [J]. COMPOSITES-MECHANICS COMPUTATIONS APPLICATIONS, 2019, 10 (01): : 39 - 68
  • [46] Influence of the curing cycles on the fatigue performance of unidirectional glass fiber reinforced epoxy composites
    Huether, Jonas
    Brondsted, Povl
    [J]. 37th Riso International Symposium on Materials Science, 2016, 139
  • [47] DYNAMIC PROPERTIES OF UNIDIRECTIONAL CARBON AND GLASS FIBER REINFORCED PLASTICS IN TORSION AND FLEXURE
    ADAMS, RD
    FOX, MAO
    FLOOD, RJL
    FRIEND, RJ
    HEWITT, RL
    [J]. JOURNAL OF COMPOSITE MATERIALS, 1969, 3 : 594 - &
  • [48] Developing a hybrid, carbon/glass fiber-reinforced, epoxy composite automotive drive shaft
    Abu Talib, A. R.
    Ali, Aidy
    Badie, Mohamed A.
    Lah, Nur Azida Che
    Golestaneh, A. F.
    [J]. MATERIALS & DESIGN, 2010, 31 (01) : 514 - 521
  • [49] Hybrid effect of functionally graded hybrid composites of glass-carbon fibers
    Singh, Shamsher Bahadur
    Chawla, Himanshu
    Ranjitha, B.
    [J]. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2019, 26 (14) : 1195 - 1208
  • [50] Hydrothermal durability of unidirectional flax/carbon fiber hybrid composite plates
    Wang, Anni
    Liu, Xiaogang
    Yue, Qingrui
    Xian, Guijun
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 22 : 2043 - 2061