Extended Open Time - the need for standardization of an important characteristic of tile adhesives

被引:0
|
作者
Zurbriggen, Roger
机构
[1] LPM AG, Beinwil am See, Switzerland
来源
ZKG INTERNATIONAL | 2021年 / 74卷 / 07期
关键词
Standardization;
D O I
暂无
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The EN 12004 defines the characteristics of ceramic tile adhesives. Because these materials are applied as pastes which undergo reactions to be turned into hard bodies the norm defines the characteristics of both, the initial fresh stage and the final hardened stage. A recent reworking of the EN 12004 targets to delete the fresh mortar characteristics and parts of the strength characteristics. Only the classifications of normal cementitious adhesives (CD and fast-setting adhesives (F) will be kept in the norm. Deleting the classification E for Extended Open Time bears the risk that the number of failures will increase. The reason is that a standard Open Time of 20 min is good enough for normal conditions. But for warm temperatures and/or windy conditions an Extended Open Time of 30 min provides better security for good wetting of the tiles, which is a precondition for a durable adhesion. © 2021 Bauverlag BV GmbH. All rights reserved.
引用
收藏
页码:58 / 61
页数:4
相关论文
共 50 条
  • [21] Extended time test accommodations: Does use correspond to score comparability for students with disabilities deemed in need?
    Witmer, Sara E.
    Marinho, Nathalie
    PSYCHOLOGY IN THE SCHOOLS, 2024, 61 (11) : 4175 - 4188
  • [22] Characteristic time scales for predicting the scalar flux at a free surface in turbulent open-channel flows
    Nagaosa, Ryuichi
    Handler, Robert A.
    AICHE JOURNAL, 2012, 58 (12) : 3867 - 3877
  • [23] Additive effects of touch-activated polymerization and extended irradiation time on bonding of light-activated adhesives to root canal dentin
    Dwiandhany, Wahyuni S.
    Abdou, Ahmed
    Tichy, Antonin
    Yonekura, Kazuhide
    Ikeda, Masaomi
    Hosaka, Keiichi
    Tagami, Junji
    Nakajima, Masatoshi
    JOURNAL OF PROSTHETIC DENTISTRY, 2022, 127 (05): : 750 - 758
  • [24] Engineering of open assembly time of water-based polyvinyl acetate (PVAc) wood adhesives by post-addition of additives
    Bliem, Peter
    van Herwijnen, Hendrikus W. G.
    Meissl, Robert
    Stadlbauer, Walter
    Konnerth, Johannes
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2022, 117
  • [25] Standardization of a two step real-time PCR based method for species specific detection of medically important Aspergillus sp.
    Das, P.
    Bhattacharya, S.
    Harishankar, A.
    Chandy, M.
    MYCOSES, 2015, 58 : 189 - 189
  • [26] The anchor-based minimal important change, based on receiver operating characteristic analysis or predictive modeling, may need to be adjusted for the proportion of improved patients
    Terluin, Berend
    Eekhout, Iris
    Terwee, Caroline B.
    JOURNAL OF CLINICAL EPIDEMIOLOGY, 2017, 83 : 90 - 100
  • [27] An "open house" conference format allows for effective teaching without the need for protected nonclinical time for trainees
    Hunter, Samuel A.
    Lockman, Justin L.
    Schwartz, Alan Jay
    PEDIATRIC ANESTHESIA, 2020, 30 (04) : 512 - 513
  • [28] Extended time limit for the transcatheter removal of intravascular foreign bodies: New information on an important but almost "forgotten" catheter intervention
    Mullins, CE
    CATHETERIZATION AND CARDIOVASCULAR DIAGNOSIS, 1998, 44 (02): : 217 - 217
  • [29] Open time studies of cold curing polyurethane adhesives using a standardized spatula test setup suitable for near-production conditions
    Mahnel, Sabrina
    Bannert, Franz
    Zimmermann, Johannes
    Grunder, Sergio
    Demmig, Martin
    Lomolino, Silvia
    Grundmeier, Guido
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2024, 129
  • [30] Influences of deep learning, need for cognition and preparation time on open- and closed-book test performance
    Heijne-Penninga, Marjolein
    Kuks, Jan B. M.
    Hofman, W. H. Adriaan
    Cohen-Schotanus, Janke
    MEDICAL EDUCATION, 2010, 44 (09) : 884 - 891