Microstructure and Texture Evolution during Recrystallization of Interstitial Free Steel

被引:0
|
作者
Mao, Wei [1 ]
Yu, Hao [1 ]
Sun, Weihua [2 ]
机构
[1] Univ Sci & Technol Beiijng, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
[2] Jinan Iron & Steel Co Ltd, Jinan 250101, Peoples R China
来源
关键词
Interstitial Free Steel; Oriented Nucleation; Recrystallization; Texture; LOW-CARBON-STEEL; NUCLEATION; IRON;
D O I
10.4028/www.scientific.net/AMR.146-147.743
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The evolution of microstructure and texture due to recrystallization was investigated in cold rolled interstitial free (IF) steel. Samples taken from the cold band of a 0.07%Ti bearing IF steel with total cold rolling reduction of 75% were investigated by using optical microscopy, X-ray diffraction and electron back-scattered diffraction etc. The aim of this study was to obtain a real picture of the formation of the recrystallization texture of IF steel, which would contribute to proper texture control for improving deep drawability. The mechanism responsible for the evolution of texture is discussed experimentally from four aspects. First of all, the microstructure of partially annealed cold rolled specimen is obtained. The recrystallized grain form earlier in more darkly etched regions from the micrographs, which belong to the ND//< 111 > fiber components. In addition, the fractions of the {111}< 110 > and {111}< 112 > components increase slowly during the early stage of recrystallization, because the gamma-fiber recrystallized texture is growing, while at the same time the gamma-fiber deformed texture is being consumed. Moreover, The texture formation has been discussed taking into consideration of the stored energy and the misorientation between the orientation of the recrystallized grain and that of the surrounding deformed matrix. The work indicates that the recrystallized grains, which migrate into the deformed grains, are mainly with the high misorientation angles. The large percentage of the recrystallized grains, whose misorientation angles with deformed grains exceed 15 degrees, are corresponding to the {111} transformation texture. Nucleation first starts at colonies that have the highest stored energy of deformation, which has the same orientation as the deformed grains. By analysis, the formation of recrystallization texture was well explained by oriented nucleation mechanism rather than by selective growth mechanism.
引用
收藏
页码:743 / +
页数:2
相关论文
共 50 条
  • [41] Microstructure evolution in an interstitial-free steel during cold rolling at low strain levels
    Chen, QZ
    Ngan, AHW
    Duggan, BJ
    [J]. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2003, 459 (2035): : 1661 - 1685
  • [42] Recrystallization texture and microstructure formation in heavily rolled IF steel
    Quadir, MZ
    Duggan, BJ
    [J]. ICOTOM 14: TEXTURES OF MATERIALS, PTS 1AND 2, 2005, 495-497 : 489 - 494
  • [43] Recrystallization texture characteristic and drawability of a warm rolled and cold rolled interstitial-free steel
    Zhaodong Wang
    Yanhui Guo
    Xianghua Liu
    Guodong Wang
    Peng Zhang
    [J]. Journal of Materials Engineering and Performance, 2006, 15 : 646 - 650
  • [44] Recrystallization texture characteristic and drawability of a warm rolled and cold rolled interstitial-free steel
    Wang, Z.
    Zhang, A.
    Guo, Y.
    Liu, X.
    Wang, G.
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2006, 15 (06) : 646 - 650
  • [46] Evolution of Microstructure and Texture During Warm Rolling of a Duplex Steel
    Bhattacharjee, Pinaki Prasad
    Zaid, M.
    Sathiaraj, G. D.
    Bhadak, B.
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (04): : 2180 - 2191
  • [47] Evolution of Microstructure and Texture During Warm Rolling of a Duplex Steel
    Pinaki Prasad Bhattacharjee
    M. Zaid
    G. D. Sathiaraj
    B. Bhadak
    [J]. Metallurgical and Materials Transactions A, 2014, 45 : 2180 - 2191
  • [48] Texture and microstructure development in cold-rolled interstitial free (IF) steel sheet during electric field annealing
    He, CS
    Zhang, YD
    Wang, YN
    Zhao, X
    Zuo, L
    Esling, C
    [J]. SCRIPTA MATERIALIA, 2003, 48 (06) : 737 - 742
  • [49] Texture and microtexture evolution in an ultra-low carbon steel during recrystallization
    Novillo, E
    Petite, MM
    Bocos, JL
    Iza-Mendia, A
    Gutiérrez, I
    [J]. ADVANCED ENGINEERING MATERIALS, 2003, 5 (08) : 575 - 578
  • [50] Computer Simulation of Simultaneous Evolution of Individual Texture Components During Recrystallization of an IF Steel
    de Oliveira, Simone Carreiro
    da Silva Assis, Weslley Luiz
    Villa, Elena
    Rios, Paulo
    [J]. MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2013, 16 (05): : 1195 - 1202