Modelling of evaporation and condensation pressure drop in microfin tubes

被引：0

作者：

Chamra, LM ^{[1
]}

Mago, PJ ^{[1
]}

Tan, MO ^{[1
]}

Kung, CC ^{[1
]}

机构：

[1] Mississippi State Univ, Dept Mech Engn, Mississippi State, MS 39762 USA

来源：

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE | 2005年 / 219卷 / 01期

关键词：

evaporation; condensation; pressure drop; microfin tubes;

D O I：

10.1243/095440605X8306

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A semi-empirical model to predict the pressure drop of pure refrigerants and refrigerant mixtures in microfin tubes for both condensation and evaporation is presented. The new pressure-drop model is based on an existing smooth-tube correlation. The model was validated using experimental data compiled from published literature and this showed that the model is capable of predicting pressure drops for different refrigerants and refrigerant mixtures within 10-25 per cent mean absolute deviation. This model can be employed in microfin tubes with fin heights from 0.1 to 0.38 mm, helix angles from 0 to 30 degrees, and mass flux ranges up to 600 kg/m(2) s.

引用

页码：61 / 71

页数：11

共 50 条

[21] Condensation heat transfer and pressure drop of R22 in 5-mm diameter microfin tubes
Wu, XM
Wang, XL
Wang, WC
[J]. JOURNAL OF ENHANCED HEAT TRANSFER, 2004, 11 (04) : 275 - 282
[22] Heat transfer and pressure drop of R1123/R32 (40/60 mass%) flow in horizontal microfin tubes during condensation and evaporation
Kondou, Chieko
[J]. SCIENCE AND TECHNOLOGY FOR THE BUILT ENVIRONMENT, 2019, 25 (10) : 1281 - 1291
[23] Modelling of evaporation heat transfer of pure refrigerants and refrigerant mixtures in microfin tubes
Charnra, L. M.
Mago, P. J.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2007, 221 (04) : 443 - 454
[24] Numerical simulation of heat transfer and pressure drop characteristics of internal microfin tubes
Zhang, Jingzhi
Lin, Jinpin
Li, Wei
[J]. PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE, 2016, VOL 2, 2016,
[25] Evaporation in microfin tubes: A generalized prediction model
Thome, JR
Kattan, N
Favrat, D
[J]. CONVECTIVE FLOW AND POOL BOILING, 1999, : 239 - 244
[26] New flow boiling frictional pressure drop multipliers for smooth and microfin tubes
Celen, Ali
Dalkilic, Ahmet Selim
[J]. KERNTECHNIK, 2022, 87 (04) : 420 - 451
[27] Experimental analysis of the single phase pressure drop characteristics of smooth and microfin tubes
Celen, Ali
Dalkilic, Ahmet Selim
Wongwises, Somchai
[J]. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2013, 46 : 58 - 66
[28] Heat transfer and pressure drop measurements for in-tube condensation of CFC-113 using microfin tubes and wire inserts
Briggs, A
Kelemenis, C
Rose, JW
[J]. EXPERIMENTAL HEAT TRANSFER, 2000, 13 (03) : 163 - 181
[29] Condensation heat transfer and pressure drop of R134a inside microfin tubes: effect of fin height and fin angle
Al-Dadah, R. K.
Naser, A. D.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2007, 221 (01) : 43 - 54
[30] Flow condensation pressure drop characteristics of R410A-oil mixture inside small diameter horizontal microfin tubes
Huang, Xiangchao
Ding, Guoliang
Hu, Haitao
Zhu, Yu
Gao, Yifeng
Deng, Bin
[J]. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2010, 33 (07): : 1356 - 1369

← 1 2 3 4 5 →