Bearing capacity and failure mechanism of skirted footings

被引:2
|
作者
Shukla, Rajesh P. [1 ]
Jakka, Ravi S. [2 ]
机构
[1] Natl Inst Technol, Dept Civil Engn, Srinagar 190006, Jammu & Kashmir, India
[2] IIT Roorkee, Dept Earthquake Engn, Roorkee 247667, Uttar Pradesh, India
关键词
bearing capacity; failure; FEM; improvement factors; skirted foundation; BOUND LIMIT ANALYSIS; SHALLOW FOUNDATIONS; CIRCULAR FOUNDATIONS; UNDRAINED CAPACITY; BEHAVIOR; SQUARE; PERFORMANCE; SETTLEMENT; SAND; LOAD;
D O I
10.12989/gae.2022.30.1.051
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
The article presents the results of finite element analyses carried out on skirted footings. The bearing capacity increases with the provision of the flexible and rigid skirt, but the effectiveness varies with various other factors. The skirts are more efficient in the case of cohesionless soils than cohesive and c-?? soils. Efficiency reduces with an increase in the soil strength and footing depth. The rigid skirt is relatively more efficient compared to the flexible skirt. In contrast, to the flexible skirt, the efficiency of the rigid skirt increases continuously with skirt length. The difference in the effectiveness of both skirts becomes more noticeable with an increase in the strength parameters, skirt length, and footing depth. The failure mechanism also changes significantly with the inclusion of a rigid skirt. The rigid skirt behaves as a solid embedded footing, and the failure mechanism becomes confined with an increase in the skirt length. Few small-scale laboratory tests were carried out to study the flexible and rigid skirt and verify the numerical study results. The numerical analysis results are further used to develop nonlinear equations to predict the enhancement in bearing capacity with the provision of the rigid and flexible skirts.
引用
收藏
页码:51 / 66
页数:16
相关论文
共 50 条
  • [31] BEARING CAPACITY OF SQUARE FOOTINGS ON SAND
    LARSEN, P
    OVESEN, NK
    PROCEEDINGS OF THE TWELFTH INTERNATIONAL CONFERENCE ON SOIL MECHANICS AND FOUNDATION ENGINEERING, VOL 3, 1989, : 2077 - 2080
  • [32] Bearing Capacity Factors of Ring Footings
    Hosseininia, Ehsan Seyedi
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, 2016, 40 (02) : 121 - 132
  • [33] Vertical bearing capacity for ring footings
    Zhao, L.
    Wang, J. H.
    COMPUTERS AND GEOTECHNICS, 2008, 35 (02) : 292 - 304
  • [34] BEARING CAPACITY OF FOOTINGS ADJACENT TO SLOPES
    SARAN, S
    SUD, VK
    HANDA, SC
    JOURNAL OF GEOTECHNICAL ENGINEERING-ASCE, 1989, 115 (04): : 553 - 573
  • [35] Bearing capacity of two interfering footings
    Kumar, Jyant
    Kouzer, K. M.
    INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 2008, 32 (03) : 251 - 264
  • [36] Evaluation of the bearing capacity of footings on slopes
    Castelli, Francesco
    Lentini, Valentina
    INTERNATIONAL JOURNAL OF PHYSICAL MODELLING IN GEOTECHNICS, 2012, 12 (03) : 112 - 118
  • [37] Bearing Capacity of Interfering Strip Footings
    Lavasan, Arash Alimardani
    Ghazavi, Mahmoud
    von Blumenthal, Achim
    Schanz, Tom
    JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING, 2018, 144 (03)
  • [38] Bearing Capacity Factors of Ring Footings
    Ehsan Seyedi Hosseininia
    Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2016, 40 : 121 - 132
  • [39] Assessment of interaction mechanism and bearing capacity of strip footings located on slope face
    Rana Acharyya
    Arindam Dey
    Sādhanā, 2020, 45
  • [40] Assessment of interaction mechanism and bearing capacity of strip footings located on slope face
    Acharyya, Rana
    Dey, Arindam
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2020, 45 (01):