Spray Characteristics of n-Butanol in a High-Pressure Common-Rail Injection System

被引:8
|
作者
Yi, Bolun [1 ]
Lin, Qizhao [1 ]
Song, Lanbo [1 ]
Fu, Wei [1 ]
Li, Fengyu [1 ]
Liu, Tao [1 ]
机构
[1] Univ Sci & Technol China, Dept Thermal Sci & Energy Engn, 96 Jinzhai Rd, Hefei 230026, Anhui, Peoples R China
基金
中国国家自然科学基金;
关键词
n-Butanol; Diesel; Spray characteristics; LOW-TEMPERATURE COMBUSTION; DIESEL-ENGINE; SOYBEAN BIODIESEL; VEGETABLE-OIL; HOLE INJECTOR; FUEL; ATOMIZATION; ETHANOL; EMISSIONS; CHAMBER;
D O I
10.1061/(ASCE)EY.1943-7897.0000474
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
This study was conducted to investigate the spray characteristics of n-butanol, using a diesel spray for comparison. Spray tip penetration and spray cone angle were tested and analyzed. A high-speed photographic system was employed to observe the spray evolution, and a common-rail system and constant-volume chamber were used to change the pressure. The results show that the n-butanol spray penetrates faster than the diesel spray while under the same conditions. The experimental trend lines support the axial development model constructed by Hiroyasu and Arai on the grounds of a similar proportional relation to time after the start of injection, and the empirical equations provide reasonable approximations to the experimental measurements of the spray tip penetration. (c) 2017 American Society of Civil Engineers.
引用
收藏
页数:7
相关论文
共 50 条
  • [41] Experimental and numerical investigation of diesel spray behaviour in high pressure common-rail systems
    Sorusbay, Cem
    Imren, Abdurrahman
    Ergeneman, Metin
    Valentino, Gerardo
    Allocca, Luigi
    INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2009, 50 (1-4) : 50 - 65
  • [42] Effect of di-n-butyl ether blending with soybean-biodiesel on spray and atomization characteristics in a common-rail fuel injection system
    Guan, Li
    Tang, Chenglong
    Yang, Ke
    Mo, Jun
    Huang, Zuohua
    FUEL, 2015, 140 : 116 - 125
  • [43] Effect of fuel temperature on heavy fuel oil spray characteristics in a common-rail fuel injection system for marine engines
    Park, Junkyu
    Jang, Ji Hwan
    Park, Sungwook
    OCEAN ENGINEERING, 2015, 104 : 580 - 589
  • [44] Elimination of fuel pressure fluctuation and multi-injection fuel mass deviation of high pressure common-rail fuel injection system
    Pimao Li
    Youtong Zhang
    Tieshuan Li
    Lizhe Xie
    Chinese Journal of Mechanical Engineering, 2015, 28 : 294 - 306
  • [45] Elimination of Fuel Pressure Fluctuation and Multi-injection Fuel Mass Deviation of High Pressure Common-rail Fuel Injection System
    LI Pimao
    ZHANG Youtong
    LI Tieshuan
    XIE Lizhe
    Chinese Journal of Mechanical Engineering, 2015, 28 (02) : 294 - 306
  • [46] Elimination of Fuel Pressure Fluctuation and Multi-injection Fuel Mass Deviation of High Pressure Common-rail Fuel Injection System
    LI Pimao
    ZHANG Youtong
    LI Tieshuan
    XIE Lizhe
    Chinese Journal of Mechanical Engineering, 2015, (02) : 294 - 306
  • [47] Elimination of Fuel Pressure Fluctuation and Multi-injection Fuel Mass Deviation of High Pressure Common-rail Fuel Injection System
    Li Pimao
    Zhang Youtong
    Li Tieshuan
    Xie Lizhe
    CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2015, 28 (02) : 294 - 306
  • [48] An investigation of the engine performance, emissions and combustion characteristics of coconut biodiesel in a high-pressure common-rail diesel engine
    How, H. G.
    Masjuki, H. H.
    Kalam, M. A.
    Teoh, Y. H.
    ENERGY, 2014, 69 : 749 - 759
  • [49] spray and combustion characteristics of biodiesel/diesel blended fuel in a direct injection common-rail diesel engine
    Suh, Hyun Kyu
    Roh, Hyun Gu
    Lee, Chang Sik
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2008, 130 (03):
  • [50] A micromachined high pressure stable mass flow sensor for common-rail injection systems
    Schmid, U
    Hoffmann, R
    Krötz, G
    TECHNISCHES MESSEN, 2001, 68 (05): : 208 - 214