Micro-friction characteristics of aligned carbon nanotube film on an anodic aluminum oxide template

被引：23
|
作者：
Tu, JP [1 ]
Jiang, CX
Guo, SY
Fu, MF
机构：
[1] Zhejiang Univ, Dept Mat Sci & Engn, Hangzhou 310027, Peoples R China
[2] Nanchang Univ, Dept Mech & Elect Engn, Nanchang 330029, Peoples R China
[3] Zhejiang Inst Sci & Technol, Dept Mech Engn, Hangzhou 310012, Peoples R China
来源：
MATERIALS LETTERS | 2004年 / 58卷 / 10期
基金：
中国国家自然科学基金;
关键词：
carbon nanotubes (CNTs); anodic aluminum oxide template; film; micro-friction properties;
D O I：
10.1016/j.matlet.2003.10.042
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Aligned multiwalled carbon nanotubes (CNTs) have been obtained on an anodic aluminum oxide (AAO) template by chemical catalytic vapor deposition at 650 degreesC. the aligned CNTs grown out of pores of AAO membranes were uniform in diameter and about 3 mum in length. Micro-friction properties of the aligned CNT film were investigated using a friction force microscopy (FFM) and ball-on-disk tribotester under dry conditions. The FFM measurements indicated that the aligned CNT film had low friction coefficient due to the self-lubricating effect. Under a relatively low applied load, the friction coefficient of the CNT film dry sliding against a corundum ball decreased with increasing the sliding velocity, and the adhesion between the aligned CNT film and AAO template remained intact. (C) 2003 Elsevier B.V. All rights reserved.
引用
收藏
页码：1646 / 1649
页数：4
相关论文
共 50 条
  • [41] Preparation of ultrafine carbon tubes in nanochannels of an anodic aluminum oxide film
    Kyotani, T
    Tsai, LF
    Tomita, A
    [J]. CHEMISTRY OF MATERIALS, 1996, 8 (08) : 2109 - 2113
  • [42] Preparation of Ultrafine Carbon Tubes in Nanochannels of an Anodic Aluminum Oxide Film
    [J]. Chem Mater, 8 (2109):
  • [43] Preparation of ultrafine carbon tubes in nanochannels of an anodic aluminum oxide film
    Kyotani, Takashi
    Tsai, Li-Fu
    Tomita, Akira
    [J]. Chemistry of Materials, 1996, 8 (08): : 2109 - 2113
  • [44] Field emission of carbon nanotubes on anodic aluminum oxide template with controlled tube density
    Chen, PL
    Chang, JK
    Kuo, CT
    Pan, FM
    [J]. APPLIED PHYSICS LETTERS, 2005, 86 (12) : 1 - 3
  • [45] Controllable synthesis of carbon spheres based on anodic aluminum oxide nano-template
    Wang, Cunjing
    Yao, Peng
    Chen, Gairong
    [J]. BIOTECHNOLOGY, CHEMICAL AND MATERIALS ENGINEERING, PTS 1-3, 2012, 393-395 : 32 - 35
  • [46] Study on nano capillary in the polymer nanotube arrays growth by anodic aluminum oxide(AAO) template wetting
    Yang, Chao
    Li, Xiaoru
    Yang, Shujing
    Zhao, Qingpei
    Zhang, Wei
    Song, Guojun
    [J]. INTEGRATED FERROELECTRICS, 2016, 171 (01) : 160 - 168
  • [47] Study on the Growth Mechanism of the Polymer Nanotube Arrays by Its Controlled Growth in Anodic Aluminum Oxide Template
    Yang, Chao
    Li, Xiaoru
    Yang, Shujing
    Song, Guojun
    [J]. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2016, 16 (07) : 7758 - 7763
  • [48] Fabrication nano-pillars pattern on PDMS using anodic aluminum oxide film as template
    Ting, Yung-Chiang
    Shy, Shyi-Long
    [J]. ALTERNATIVE LITHOGRAPHIC TECHNOLOGIES IV, 2012, 8323
  • [49] Fabrication of Thermo-conductivity Film Using Anodic Aluminum Oxide Template and Silver Nanowires
    Chen, Chien Chon
    Chang, Shao Fu
    Kao, Mann Juin
    Jehng, Wern-Dare
    Hoa, Wang Shing
    [J]. ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 22 - +
  • [50] Patterned carbon nanotube field emitter using the regular array of an anodic aluminium oxide template
    Yu, WJ
    Cho, YS
    Choi, GS
    Kim, DJ
    [J]. NANOTECHNOLOGY, 2005, 16 (05) : S291 - S295
12345