Micro-friction characteristics of aligned carbon nanotube film on an anodic aluminum oxide template

被引：23
|
作者：
Tu, JP [1 ]
Jiang, CX
Guo, SY
Fu, MF
机构：
[1] Zhejiang Univ, Dept Mat Sci & Engn, Hangzhou 310027, Peoples R China
[2] Nanchang Univ, Dept Mech & Elect Engn, Nanchang 330029, Peoples R China
[3] Zhejiang Inst Sci & Technol, Dept Mech Engn, Hangzhou 310012, Peoples R China
来源：
MATERIALS LETTERS | 2004年 / 58卷 / 10期
基金：
中国国家自然科学基金;
关键词：
carbon nanotubes (CNTs); anodic aluminum oxide template; film; micro-friction properties;
D O I：
10.1016/j.matlet.2003.10.042
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Aligned multiwalled carbon nanotubes (CNTs) have been obtained on an anodic aluminum oxide (AAO) template by chemical catalytic vapor deposition at 650 degreesC. the aligned CNTs grown out of pores of AAO membranes were uniform in diameter and about 3 mum in length. Micro-friction properties of the aligned CNT film were investigated using a friction force microscopy (FFM) and ball-on-disk tribotester under dry conditions. The FFM measurements indicated that the aligned CNT film had low friction coefficient due to the self-lubricating effect. Under a relatively low applied load, the friction coefficient of the CNT film dry sliding against a corundum ball decreased with increasing the sliding velocity, and the adhesion between the aligned CNT film and AAO template remained intact. (C) 2003 Elsevier B.V. All rights reserved.
引用
收藏
页码：1646 / 1649
页数：4
相关论文
共 50 条
  • [1] Friction and wear properties of aligned film of amorphous carbon nanorods on anodic aluminum oxide template in vacuum
    Tu, JP
    Jiang, C
    Guo, SY
    Zhu, LP
    Fu, FM
    Zhao, XB
    [J]. SURFACE & COATINGS TECHNOLOGY, 2005, 198 (1-3): : 464 - 468
  • [2] Anodic aluminum oxide template assisted growth of vertically aligned carbon nanotube arrays by ECR-CVD
    Chen, PL
    Chang, JK
    Kuo, CT
    Pan, FM
    [J]. DIAMOND AND RELATED MATERIALS, 2004, 13 (11-12) : 1949 - 1953
  • [3] Synthesis of carbon nanotube composites in nanochannels of an anodic aluminum oxide film
    Kyotani, T
    Pradhan, BK
    Tomita, A
    [J]. BULLETIN OF THE CHEMICAL SOCIETY OF JAPAN, 1999, 72 (09) : 1957 - 1970
  • [4] Fabrication of the aligned and patterned carbon nanotube field emitters using the anodic aluminum oxide nano-template on a Si wafer
    Jeong, SH
    Lee, KH
    [J]. SYNTHETIC METALS, 2003, 139 (02) : 385 - 390
  • [5] Synthesis of carbon nanotube arrays using ethanol in porous anodic aluminum oxide template
    Yu, GJ
    Wang, S
    Gong, JL
    Zhu, DZ
    He, SX
    Li, YL
    Zhu, ZY
    [J]. CHINESE SCIENCE BULLETIN, 2005, 50 (11): : 1097 - 1100
  • [6] Synthesis of carbon nanotube arrays using ethanol in porous anodic aluminum oxide template
    YU Guojun
    [J]. Science Bulletin, 2005, (11) : 1097 - 1100
  • [7] Growth of carbon nanotube field emitters in the triode structure using anodic aluminum oxide as the template
    Lin, Chen-Chun
    Chang, Kai-Chun
    Pan, Fu-Ming
    Kuo, Cheng-Tzu
    Liu, Mai
    Mo, Chi-Neng
    [J]. DIAMOND AND RELATED MATERIALS, 2007, 16 (4-7) : 1388 - 1392
  • [8] FORMATION OF ULTRAFINE CARBON TUBES BY USING AN ANODIC ALUMINUM-OXIDE FILM AS A TEMPLATE
    KYOTANI, T
    TSAI, LF
    TOMITA, A
    [J]. CHEMISTRY OF MATERIALS, 1995, 7 (08) : 1427 - 1428
  • [9] Improved carbon nanotube growth inside an anodic aluminum oxide template using microwave radiation
    Dadras, Sedigheh
    Faraji, Maryam
    [J]. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 2018, 116 : 203 - 208
  • [10] Hydrogen sensors based on aligned carbon nanotubes in an anodic aluminum oxide template with palladium as a top electrode
    Ding, Dongyan
    Chen, Zhi
    Rajaputra, Suresh
    Singh, Vijay
    [J]. SENSORS AND ACTUATORS B-CHEMICAL, 2007, 124 (01) : 12 - 17
12345