Influence of pole and slot combinations on cogging torque in fractional slot PM motors

被引：43
|
作者：
Hwang, C. C. [1 ]
Wu, M. H. [1 ]
Cheng, S. P. [1 ]
机构：
[1] Feng Chia Univ, Dept Elect Engn, Taichun 407, Taiwan
来源：
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 2006年 / 304卷 / 01期
关键词：
Pole and slot combinations; Cogging torque; Fractional slot PM motors;
D O I：
10.1016/j.jmmm.2006.01.207
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper investigates the influence of the pole and slot combinations on cogging torque for motors with a number of slots per pole per phase between 1/2 and 1/4. Criteria for selecting the motor with the lowest cogging torque among any valid pole and slot combinations are proposed. A technique for reducing cogging torque in surface-mounted permanent magnet motors is also presented. The finite-element analysis method is used for the calculation of the cogging torque. (C) 2006 Elsevier B. V. All rights reserved.
引用
收藏
页码：E430 / E432
页数：3
相关论文
共 50 条
  • [21] Influence of Slot Openings and Tooth Profile on Cogging Torque in Axial-Flux PM Machines
    Wanjiku, J.
    Khan, M. A.
    Barendse, P. S.
    Pillay, P.
    [J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2015, 62 (12) : 7578 - 7589
  • [22] Interaction Effects of PM Tolerances and Rotor Eccentricities on Cogging Torque of 12-slot/10-pole PM Machines
    Xiang, Dong
    Zhu, Z.Q.
    Liang, Dawei
    Wu, Yuehong
    Xu, Fei
    Cheng, Yunfeng
    [J]. IEEE Transactions on Industry Applications, 2024, 60 (05) : 6648 - 6659
  • [23] Comparison of optimal slot/pole number combinations in fractional slot permanent magnet synchronous machines having similar slot and pole numbers
    Liu, Yue
    Zhu, Zi-Qiang
    Gan, Chengwei
    Brockway, Simon
    Hilton, Chris
    [J]. JOURNAL OF ENGINEERING-JOE, 2019, (17): : 4585 - 4589
  • [24] Tooth-slot cogging torque and noise analysis of permanent magnet motors
    Lu, YP
    Li, Y
    [J]. ICEMS'2001: PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS I AND II, 2001, : 860 - 862
  • [25] Pull-out torque of fractional-slot PM-motors with concentrated winding
    Salminen, P
    Jokinen, T
    Pyrhönen, J
    [J]. IEE PROCEEDINGS-ELECTRIC POWER APPLICATIONS, 2005, 152 (06): : 1440 - 1444
  • [26] Slot and Pole Ratio of Permanent Magnet Synchronous Motor for Cogging Torque and Torque Ripple Performance
    Lan, I. Wei
    Ho, Hsiang-Wei
    [J]. 2018 INTERNATIONAL CONFERENCE OF ELECTRICAL AND ELECTRONIC TECHNOLOGIES FOR AUTOMOTIVE, 2018,
  • [27] Analysis of the optimization of the pole arc combination to reduce the cogging torque in PM motors
    School of Electrical Engineering, Shandong University, Jinan 250061, China
    [J]. Zhongguo Dianji Gongcheng Xuebao, 2007, 6 (7-11):
  • [28] The Optimal Design of Fractional-slot SPM to Reduce Cogging Torque and Vibration
    Cho, Gyu-Won
    Jang, Woo-Sung
    Jang, Ki-Bong
    Kim, Gyu-Tak
    [J]. JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY, 2012, 7 (05) : 753 - 758
  • [29] The Effect of the Number of Concentrate Slots and Pole Arc Optimization on the Cogging Torque Reduction in Fractional Slot Number Type of PMMs
    Nur, Tajuddin
    Muljadi, Eduard
    Herlina
    Kasbi, Slamet
    Ling, Jeeng Min
    [J]. 2021 24TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2021), 2021, : 17 - 22
  • [30] A study of cogging torque in permanent magnet synchronous machines with fractional slot windings
    Pristup A.G.
    Toporkov D.M.
    Shevchenko A.F.
    [J]. Russian Electrical Engineering, 2014, 85 (12) : 743 - 747
12345