Preparation and Mechanical Properties of Fiber Reinforced PLA for 3D Printing Materials

被引：17

作者：

Li, Xionghao ^{[1
]}

Ni, Zhongjin ^{[1
,2
]}

Bai, Shuyang ^{[1
]}

Lou, Baiyang ^{[2
]}

机构：

[1] Zhejiang A&F Univ, Coll Engn, Hangzhou, Zhejiang, Peoples R China

[2] Zhejiang Univ Technol, Sch Mech Engn, Hangzhou, Zhejiang, Peoples R China

来源：

2017 INTERNATIONAL SYMPOSIUM ON APPLICATION OF MATERIALS SCIENCE AND ENERGY MATERIALS (SAMSE 2017) | 2018年 / 322卷

关键词：

D O I：

10.1088/1757-899X/322/2/022012

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The cellulose prepared by means of TEMPO oxidation method and glass fibre was blended with PLA respectively, and were spun into enhanced PLA wires. This study evaluates the wire rods that is from extruder is suitable for FDM printing by various physical characterization tests to determine their feasibility as a 3D printing filament materials. The cellulose and glass fibre is blended with PLA and spun into the reinforced PLA filament respectively, which is applied to FDM printing technology. The results showed that the intensity of strike resistant of the reinforced PLA filament made from cellulose and PLA is 34% to 60% higher than the PLA filament, meanwhile the tensile strength is 43% to 52% higher than the pure one. The other enhanced PLA filament is 13% to 35% higher than the PLA filament in intensity of strike resistant, and the tensile strength is 54% to 61% higher than the pure one.

引用

页数：7

共 50 条

[21] Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing
Long, Haibo
Wu, Zhiqiang
Dong, Qianqian
Shen, Yuting
Zhou, Wuyi
Luo, Ying
Zhang, Chaoqun
Dong, Xianming
[J]. POLYMER ENGINEERING AND SCIENCE, 2019, 59 (s2): : E247 - E260
[22] Short carbon fiber-reinforced PLA composites: influence of 3D-printing parameters on the mechanical and structural properties
Alkabbanie, Rasha
Aktas, Bulent
Demircan, Gokhan
Yalcin, Serife
[J]. IRANIAN POLYMER JOURNAL, 2024, 33 (08) : 1065 - 1074
[23] MECHANICAL PROPERTIES OF 3D PRINTED FIBER REINFORCED THERMOPLASTIC
Sanei, Seyed Hamid Reza
Lash, Zack
Servey, Josh
Gardone, Frank
Nikhare, Chetan P.
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2019, VOL 12: ADVANCED MATERIALS: DESIGN, PROCESSING, CHARACTERIZATION, AND APPLICATIONS, 2020,
[24] Effect of the Infill Patterns on the Mechanical and Surface Characteristics of 3D Printing of PLA, PLA plus and PETG Materials
Kadhum, A. H.
Al-Zubaidi, Salah
Abdulkareem, Salah S.
[J]. CHEMENGINEERING, 2023, 7 (03)
[25] Preparation and mechanical properties of glass fiber reinforced 3D fabric reinforced epoxy foam sandwich composites
Li H.
Ding Y.
Zhang Y.
Xiang J.
Wang J.
Li J.
[J]. Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2023, 40 (01):
[26] The Influence of 3D Printing Parameters on the Mechanical Behavior of PLA
Enache, Ioana-Catalina
Cristina, Ioana-Madalina
Chivu, Oana-Roxana
Mates, Ileana
Ionita, Elena
Geambasu, Gabriel
[J]. MATERIALE PLASTICE, 2024, 61 (01) : 82 - 92
[27] PLA Mechanical Performance Before and After 3D Printing
Salem, Houcine
Abouchadi, Hamid
Elbikri, Khalid
[J]. INTERNATIONAL JOURNAL OF ADVANCED COMPUTER SCIENCE AND APPLICATIONS, 2022, 13 (03) : 324 - 330
[28] Fully biodegradable PLA composite with improved mechanical properties via 3D printing
Chen, Ye
Lu, Tingting
Li, Luyao
Zhang, Huiying
Wang, Huaping
Ke, Fuyou
[J]. MATERIALS LETTERS, 2023, 331
[29] Influence of 3D printing properties on relative dielectric constant in PLA and ABS materials
Ivica Kuzmanić
Igor Vujović
Miro Petković
Joško Šoda
[J]. Progress in Additive Manufacturing, 2023, 8 : 703 - 710
[30] Influence of 3D printing properties on relative dielectric constant in PLA and ABS materials
Kuzmanic, Ivica
Vujovic, Igor
Petkovic, Miro
Soda, Josko
[J]. PROGRESS IN ADDITIVE MANUFACTURING, 2023, 8 (04) : 703 - 710

← 1 2 3 4 5 →