Preparation and Mechanical Properties of Fiber Reinforced PLA for 3D Printing Materials

被引：17

作者：

Li, Xionghao ^{[1
]}

Ni, Zhongjin ^{[1
,2
]}

Bai, Shuyang ^{[1
]}

Lou, Baiyang ^{[2
]}

机构：

[1] Zhejiang A&F Univ, Coll Engn, Hangzhou, Zhejiang, Peoples R China

[2] Zhejiang Univ Technol, Sch Mech Engn, Hangzhou, Zhejiang, Peoples R China

来源：

2017 INTERNATIONAL SYMPOSIUM ON APPLICATION OF MATERIALS SCIENCE AND ENERGY MATERIALS (SAMSE 2017) | 2018年 / 322卷

关键词：

D O I：

10.1088/1757-899X/322/2/022012

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

The cellulose prepared by means of TEMPO oxidation method and glass fibre was blended with PLA respectively, and were spun into enhanced PLA wires. This study evaluates the wire rods that is from extruder is suitable for FDM printing by various physical characterization tests to determine their feasibility as a 3D printing filament materials. The cellulose and glass fibre is blended with PLA and spun into the reinforced PLA filament respectively, which is applied to FDM printing technology. The results showed that the intensity of strike resistant of the reinforced PLA filament made from cellulose and PLA is 34% to 60% higher than the PLA filament, meanwhile the tensile strength is 43% to 52% higher than the pure one. The other enhanced PLA filament is 13% to 35% higher than the PLA filament in intensity of strike resistant, and the tensile strength is 54% to 61% higher than the pure one.

引用

页数：7

共 50 条

[1] Mechanical Properties of Carbon Fiber Reinforced Materials for 3D Printing of Ankle Foot Orthoses
Rybarczyk, Justyna
Gorski, Filip
Kuczko, Wieslaw
Wichniarek, Radowslaw
Siwiec, Sabina
Vitkovic, Nikola
Pacurar, Razvan
[J]. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2024, 18 (04) : 191 - 215
[2] Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
Heidari-Rarani, M.
Rafiee-Afarani, M.
Zahedi, A. M.
[J]. COMPOSITES PART B-ENGINEERING, 2019, 175
[3] Effect of fiber content and plasticizer on mechanical and joint properties of carbon fiber powder reinforced PLA manufactured by 3D printing process
Oz, Ozkan
Ozturk, Fatih Huzeyfe
Gulec, Can
[J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2023, 37 (15) : 2208 - 2231
[4] Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites
Dou, Hao
Cheng, Yunyong
Ye, Wenguang
Zhang, Dinghua
Li, Junjie
Miao, Zhoujun
Rudykh, Stephan
[J]. MATERIALS, 2020, 13 (17)
[5] Experimental study on mechanical properties of steel fiber reinforced 3D printing UHPC
Yao, Yiming
Zhang, Jiawei
Sun, Yuanfeng
Liang, Shaoqing
Li, Baoshan
Wang, Jingquan
Lu, Cong
[J]. Jianzhu Jiegou Xuebao/Journal of Building Structures, 2024, 45 (09): : 29 - 40
[6] STUDY OF THE INFLUENCE OF 3D PRINTING PARAMETERS ON THE MECHANICAL PROPERTIES OF PLA
Fernandes, Joao
Deus, Augusto M.
Reis, Luis
Vaz, Maria Fatima
Leite, Marco
[J]. PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING, 2018, : 547 - 552
[7] Preparation and properties of 3D printing continuous fiber reinforced polycarbonate composite prepreg filaments
Yang L.
Liu B.
Liu T.
Gao Y.
Tian X.
[J]. Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2023, 40 (10): : 5654 - 5655
[8] Preparation and properties of PLA/PHBV/PBAT blends 3D printing filament
Yang, Mengru
Hu, Jing
Xiong, Na
Xu, Bo
Weng, Yunxuan
Liu, Yanhui
[J]. MATERIALS RESEARCH EXPRESS, 2019, 6 (06)
[9] MECHANICAL PROPERTIES OF BIODEGRADABLE PLA PLASTIC PARTS PRODUCED BY 3D PRINTING
Beniak, Juraj
Krizan, Peter
Matus, Milos
[J]. MM SCIENCE JOURNAL, 2019, 2019 : 2746 - 2750
[10] Effect of Printing Parameters of 3D Printed PLA Parts on Mechanical Properties
Jayakumar, N.
Senthilkumar, G.
Pradeep, A. D.
[J]. JOURNAL OF ENGINEERING RESEARCH, 2021, 9

← 1 2 3 4 5 →