The Influence of Composite Lay-Up on the Stability of a Structure with Closed Section

被引：5

作者：

Rozylo, Patryk ^{[1
]}

Debski, Hubert ^{[1
]}

机构：

[1] Lublin Univ Technol, Mech Engn Fac, Ul Nadbystrzycka 36, PL-20618 Lublin, Poland

来源：

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL | 2022年 / 16卷 / 01期

关键词：

buckling; composite closed-section profiles; critical load; FEM; INITIAL GEOMETRIC IMPERFECTIONS; PROGRESSIVE FAILURE; BEHAVIOR; BEAMS; PROFILES; MODEL;

D O I：

10.12913/22998624/145156

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents a study on the stability of a composite structure with a closed section. The research was carried out solely based on numerical simulations using the finite element method. ABAQUS software was used to conduct numerical simulations, which allowed to detennine the values of critical loads, as well as the corresponding fonns of buckling. As part of the research, the influence of composite material arrangement of layers on the stability of the structure was analyzed. The study was conducted on a composite material, which is a carbon-epoxy composite (CFRP). The obtained research results will be verified in subsequent studies by the results of experimental tests.

引用

页码：260 / 265

页数：6

共 50 条

[41] Research on Structural Lay-up Optimum Design of Composite Wind Turbine Blade
Zhang Lanting
[J]. 2011 2ND INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY ENGINEERING (ICAEE), 2012, 14 : 637 - 642
[42] Numerical study on the influence of liner geometry and lay-up sequence on the fatigue life of composite hydrogen storage vessel
Zhang, Yikai
Gu, Junfeng
Pan, Sheng
Yang, Wanxin
Li, Zheng
Ruan, Shilun
Shen, Changyu
[J]. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2023, 205
[43] Effects of lay-up sequence in thick composite tubes for helicopter landing gears
Sarvestani, Hamidreza Yazdani
Hojjati, Mehdi
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2017, 231 (11) : 2098 - 2110
[44] Lay-Up and Consolidation of a Composite Pipe by In Situ Ultrasonic Welding of a Thermoplastic Matrix Composite Tape
Dell'Anna, Riccardo
Lionetto, Francesca
Montagna, Francesco
Maffezzoli, Alfonso
[J]. MATERIALS, 2018, 11 (05)
[45] Alternatives for a hand lay-up composite structure: E-glass/epoxy adhesive joint or tapered laminate
Santulli, C
[J]. JOURNAL OF MATERIALS SCIENCE LETTERS, 2002, 21 (24) : 1959 - 1963
[46] Towards the combination of automated lay-up and stamp forming for consolidation of tailored composite components
Slange, Tjitse K.
Grouve, Wouter J. B.
Warnet, Laurent L.
Wijskamp, S.
Akkerman, Remko
[J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2019, 119 : 165 - 175
[47] Application ob a genetic algorithm to optimal lay-up of shells made of composite laminates
Rajasekaran, S
Ramasamy, JV
Balakrishnan, M
[J]. MECHANICS OF COMPOSITE MATERIALS, 2000, 36 (02) : 163 - 168
[48] Influence of layers lay-up on the mechanical properties of hybrid composites in field of aeronautics
Tomašić, Danijel
Ilinčić, Petar
Pilipović, Ana
[J]. Polimeri, 2015, 36 (01): : 5 - 10
[49] Ergonomic evaluation and redesign of lay-up tables
Laurie, NE
Swenor, D
[J]. ADVANCES IN OCCUPATIONAL ERGONOMICS AND SAFETY, 1999, 3 : 237 - 242
[50] Lay-up optimization of composite stiffened panels using linear approximations in lamination space
Herencia, J. Enrique
Haftka, Raphael T.
Weaver, Paul M.
Friswell, Michael I.
[J]. AIAA JOURNAL, 2008, 46 (09) : 2387 - 2391

← 1 2 3 4 5 →