Synthesis of EDTA-functionalized graphene oxide-chitosan nanocomposite for simultaneous removal of inorganic and organic pollutants from complex wastewater

被引:66
|
作者
Verma, Monu [1 ]
Lee, Ingyu [1 ]
Oh, Joosung [1 ]
Kumar, Vinod [2 ,3 ]
Kim, Hyunook [1 ]
机构
[1] Univ Seoul, Dept Environm Engn, Water Energy Nexus Lab, Seoul 02504, South Korea
[2] Graph Era Deemed Univ, Dept Life Sci, Dehra Dun 248002, Uttarakhand, India
[3] Peoples Friendship Univ Russia, RUDN Univ, Moscow 117198, Russia
基金
新加坡国家研究基金会;
关键词
Kinetics; Monolayer adsorption; Multiple pollutants; Reproducibility; Wastewater; HEAVY-METAL; COMPOSITE-MATERIAL; EFFICIENT REMOVAL; METHYLENE-BLUE; ETHYL SULFIDE; CATIONIC DYE; COPPER(II); ADSORPTION; IONS; ADSORBENT;
D O I
10.1016/j.chemosphere.2021.132385
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Discharging of inorganic and organic pollutants creates a serious threat to the human health and the environ-ment. In the current work, we have synthesized Ethylenediaminetetraacetic acid (EDTA) functionalized graphene oxide-chitosan nanocomposite (GO-EDTA-CS) for simultaneous removal of inorganic (i.e., mercury (Hg(II) and copper (Cu(II)) and organic pollutants (i.e., methylene blue (MB) and crystal violet (CV)) from wastewater via adsorption process. The structural, functional, morphological, elemental compositions, surface area and thermal properties of the synthesized nanocomposite were identified using powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field scanning electron microscopy (FESEM), energy dispersive spec-troscopy (EDS), Brunauer-Emmett-Teller (BET), and thermogravimetric analyzer (TGA), respectively. Different batch adsorption experiments such as pH effect, contact time, initial pollutants concentration, reusability etc. were studied in monocomponent system to optimize the results. The adsorption process apparently followed pseudo-second-order (PSO) kinetics for both pollutants, however the adsorption kinetics was also explained by the intra-particle diffusion model. The isotherm data for both metals ions and dyes were well fit by the Langmuir isotherm model. The maximum adsorption capacities of the adsorbent were determined 324 +/- 3.30 130 +/- 2.80, 141 +/- 6.60, and 121 +/- 3.50 mg g(-1) for Hg(II), Cu(II), MB, and CV, respectively. The excellent adsorption ca-pacity was attributed to the availability of various active functional groups (e.g., -COOH, -OH, -NH2, etc.) on the adsorbent. The EDS, elemental mapping and FTIR analysis performed before and after the adsorption of heavy metals and dyes by GO-EDTA-CS confirmed the simultaneous adsorption of the pollutants. Moreover, GO-EDTA- CS could maintain its adsorption capacity for both inorganic and organic pollutants even after seven cycles of adsorption-desorption, indicating itself a promising adsorbent for practical wastewater treatment containing both inorganic and organic toxic pollutants.
引用
收藏
页数:11
相关论文
共 50 条
  • [31] Effective removal of organic and inorganic pollutants from abattoir wastewater using magnesium oxide/activated carbon nanocomposites
    Idris, Y. J.
    Tijani, J. O.
    Mustapha, S.
    Ndamitso, M. M.
    Abdulkareem, A. S.
    Egbosiuba, T. C.
    Sagadevan, Suresh
    [J]. CERAMICS INTERNATIONAL, 2024, 50 (14) : 25933 - 25947
  • [32] Graphene oxide-chitosan composite material as adsorbent in removing methylene blue dye from synthetic wastewater
    Bryan, M. Y. K.
    Chai, P., V
    Law, J. Y.
    Mahmoudi, E.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 64 : 1587 - 1596
  • [33] Graphene oxide-iron oxide and reduced graphene oxide-iron oxide hybrid materials for the removal of organic and inorganic pollutants
    Yang, Xin
    Chen, Changlun
    Li, Jiaxing
    Zhao, Guixia
    Ren, Xuemei
    Wang, Xiangke
    [J]. RSC ADVANCES, 2012, 2 (23) : 8821 - 8826
  • [34] Graphene oxide-chitosan composite material as adsorbent in removing methylene blue dye from synthetic wastewater
    Bryan, M. Y. K.
    Chai, P. V.
    Law, J. Y.
    Mahmoudi, E.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 64 : 1587 - 1596
  • [35] Graphene oxide functionalized chitosan-magnetite nanocomposite for removal of Cu(II) and Cr(VI) from waste water
    Anush, S. M.
    Chandan, H. R.
    Gayathri, B. H.
    Asma
    Manju, N.
    Vishalakshi, B.
    Kalluraya, B.
    [J]. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2020, 164 : 4391 - 4402
  • [36] Mechanisms and adsorption capacities of biochar for the removal of organic and inorganic pollutants from industrial wastewater
    T. G. Ambaye
    M. Vaccari
    E. D. van Hullebusch
    A. Amrane
    S. Rtimi
    [J]. International Journal of Environmental Science and Technology, 2021, 18 : 3273 - 3294
  • [37] A Study on the Removal Characteristics of Organic and Inorganic Pollutants from Wastewater by Low Cost Biosorbent
    Elsayed, Asmaa E.
    Osman, Doaa I.
    Attia, Sayed K.
    Ahmed, Hayam M.
    Shoukry, Eman M.
    Mostafa, Yasser M.
    Taman, Afaf R.
    [J]. EGYPTIAN JOURNAL OF CHEMISTRY, 2020, 63 (04): : 1429 - 1442
  • [38] Mechanisms and adsorption capacities of biochar for the removal of organic and inorganic pollutants from industrial wastewater
    Ambaye, T. G.
    Vaccari, M.
    van Hullebusch, E. D.
    Amrane, A.
    Rtimi, S.
    [J]. INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY, 2021, 18 (10) : 3273 - 3294
  • [39] Synthesis of graphene oxide decorated with strontium oxide (SrO/GO) as an efficient nanocomposite for removal of hazardous ammonia from wastewater
    Mousavi, Seyed Vahid
    Bidhendi, Gholamreza Nabi
    Mehrdadi, Naser
    [J]. SEPARATION SCIENCE AND TECHNOLOGY, 2020, 55 (08) : 1462 - 1472
  • [40] Polypyrrole functionalized Cobalt oxide Graphene (COPYGO) nanocomposite for the efficient removal of dyes and heavy metal pollutants from aqueous effluents
    Anuma, Saroja
    Mishra, Praveen
    Bhat, Badekai Ramachandra
    [J]. JOURNAL OF HAZARDOUS MATERIALS, 2021, 416