Mechanics Modeling and Three-Dimensional Finite Element Simulating for High Speed Milling of Titanium Alloy

被引：0
|
作者：
Yang, Yong [1 ]
Wang, Yuling [1 ]
Li, Changhe [1 ]
机构：
[1] Qingdao Technol Univ, Sch Mech Engn, Qingdao 266033, Shandong, Peoples R China
来源：
APPLIED MECHANICS AND MECHANICAL ENGINEERING, PTS 1-3 | 2010年 / 29-32卷
关键词：
Metal cutting; Titanium alloy; Mechanics model; Finite element simulation; cutting temperature; FRICTION;
D O I：
10.4028/www.scientific.net/AMM.29-32.360
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A three-dimensional finite element model of helix double-edge cutting is developed to study the ending milling process of titanium alloy Ti6Al4V. Several mechanics models of milling process, such as material constitutive model, friction model and heat transfer model, are implemented to improve finite element simulating accuracy. A milling force experiment is carried out, and a good agreement between simulation and experimental value is achieved, which proved that the finite element model presented in this paper is correct. Using this finite element model, chip formation and cutting temperature are simulated and analyzed. This work will be a base for process parameter optimization, tool's optimization selection and design during high speed milling of difficult-to-cut titanium alloy.
引用
收藏
页码：360 / 364
页数：5
相关论文
共 50 条
  • [21] Image-based three-dimensional finite element modeling approach for upper airway mechanics
    Xu, Chun
    Brennick, M. J.
    Wootton, D. M.
    2005 27TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY, VOLS 1-7, 2005, : 2587 - 2590
  • [22] Three-dimensional finite element simulations of milling carbon/epoxy composites
    He, Yanli
    Li, Long
    Wan, Min
    Xue, Hongqian
    COMPOSITE STRUCTURES, 2022, 282
  • [23] Three-Dimensional Finite Element Modeling of Thermomechanical Problems in Functionally Graded Hydroxyapatite/Titanium Plate
    Jamaludin, S. N. S.
    Basri, S.
    Hussain, Ahmad
    Al-Othmany, Dheya Shujaa
    Mustapha, F.
    Nuruzzaman, D. M.
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2014, 2014
  • [24] Finite Element Modelling and Simulating of Drilling of Titanium Alloy
    Yang, Yong
    Sun, Jie
    ICIC 2009: SECOND INTERNATIONAL CONFERENCE ON INFORMATION AND COMPUTING SCIENCE, VOL 4, PROCEEDINGS: MODELLING AND SIMULATION IN ENGINEERING, 2009, : 178 - +
  • [25] Three-Dimensional Finite-Element Analysis of High-Speed (Millisecond) Measurements
    E. Kaschnitz
    P. Supancic
    International Journal of Thermophysics, 2005, 26 : 957 - 967
  • [26] Three-dimensional finite-element analysis of high-speed (millisecond) measurements
    Kaschnitz, E
    Supancic, P
    INTERNATIONAL JOURNAL OF THERMOPHYSICS, 2005, 26 (04) : 957 - 967
  • [27] Three-dimensional finite element modeling of effect on the cutting forces of rake angle and approach angle in milling
    Gok, Kadir
    Sari, Huseyin
    Gok, Arif
    Neseli, Suleyman
    Turkes, Erol
    Yaldiz, Suleyman
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2017, 231 (02) : 83 - 88
  • [28] Three-Dimensional Finite Element Modeling of Ultrasonic Vibration-Assisted Milling of the Nomex Honeycomb Structure
    Zarrouk, Tarik
    Nouari, Mohammed
    Salhi, Jamal-Eddine
    Abbadi, Mohammed
    Abbadi, Ahmed
    ALGORITHMS, 2024, 17 (05)
  • [29] Finite Element Modeling of Three-Dimensional Milling Process of Ti-6Al-4V
    Bajpai, Vivek
    Lee, Ineon
    Park, Hyung Wook
    MATERIALS AND MANUFACTURING PROCESSES, 2014, 29 (05) : 564 - 571
  • [30] Extrusion-shear of AZ31 Alloy Billets with Low Temperature and High Speed by Using Three-dimensional Finite Element Modeling and Experiments
    Hu Hongjun
    Zhai Zhiye
    Wang Hao
    Fan JunZhi
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2014, 17 (04): : 987 - 995
12345