Effect of repeated ceramic firings on the marginal and internal adaptation of metal-ceramic restorations fabricated with different CAD-CAM technologies

被引:0
|
作者
Kocaagaoglu, Hasan [1 ]
Albayrak, Haydar [2 ]
Kilinc, Halil Ibrahim [2 ]
Gumus, Hasan Onder [3 ]
机构
[1] Pamukkale Univ, Dept Prosthodont, Fac Dent, Denizli, Turkey
[2] Hospitadent, Kayseri, Turkey
[3] Erciyes Univ, Dept Prosthodont, Fac Dent, Kayseri, Turkey
来源
JOURNAL OF PROSTHETIC DENTISTRY | 2017年 / 118卷 / 05期
关键词
LASER MELTING TECHNOLOGY; COBALT-CHROMIUM; IN-VITRO; CROWNS; FIT; COPINGS; CAST; ALLOYS; PROSTHODONTICS; ACCURACY;
D O I
暂无
中图分类号
R78 [口腔科学];
学科分类号
1003 ;
摘要
Statement of problem. The use of computer-aided design and computer-aided manufacturing (CAD-CAM) for metal-ceramic restorations has increased with advances in the technology. However, little is known about the marginal and internal adaptation of restorations fabricated using laser sintering (LS) and soft milling (SM). Moreover, the effects of repeated ceramic firings on the marginal and internal adaptation of metal-ceramic restorations fabricated with LS and SM is also unknown. Purpose. The purpose of this in vitro study was to investigate the effects of repeated ceramic firings on the marginal and internal adaptation of metal-ceramic copings fabricated using the lost wax (LW), LS, and SM techniques. Material and methods. Ten LW, 10 LS, and 10 SM cobalt-chromium (Co-Cr) copings were fabricated for an artificial tooth (Frasaco GmbH). After the application of veneering ceramic (VITA VMK Master; VITA Zahnfabrik), the marginal and internal discrepancies of these copings were measured with a silicone indicator paste and a stereomicroscope at x100 magnification after the first, second, and third clinical simulated ceramic firing cycles. Repeated measures 2-way ANOVA and the Fisher LSD post hoc test were used to evaluate differences in marginal and internal discrepancies (alpha=.05). Results. Neither fabrication protocol nor repeated ceramic firings had any statistically significant effect on internal discrepancy values (P >.05). Marginal discrepancy values were also statistically unaffected by repeated ceramic firings (P >.05); however, the fabrication protocol had a significant effect on marginal discrepancy values (P <.001), with LW resulting in higher marginal discrepancy values than LS or SM (P <.05). Marginal discrepancy values did not vary between LS and SM (P >.05). Conclusions. All groups demonstrated clinically acceptable marginal adaptation after repeated ceramic firing cycles; however, the LS and SM groups demonstrated better marginal adaptation than that of LW group and may be appropriate clinical alternatives to LW.
引用
收藏
页码:672 / 677
页数:6
相关论文
共 50 条
  • [11] Marginal and Internal Fit of Conventional Metal-Ceramic and Lithium Disilicate CAD/CAM Crowns
    Nam, Se-Jin
    Yoon, Mi-Jung
    Kim, Won-Hee
    Ryu, Gil-Ju
    Bang, Min-Ki
    Huh, Jung-Bo
    [J]. INTERNATIONAL JOURNAL OF PROSTHODONTICS, 2015, 28 (05) : 519 - 521
  • [12] Marginal and Internal Discrepancies of Posterior Zirconia-Based Crowns Fabricated with Three Different CAD/CAM Systems Versus Metal-Ceramic
    Ortega, Rocio
    Gonzalo, Esther
    Gomez-Polo, Miguel
    Suarez, Maria J.
    [J]. INTERNATIONAL JOURNAL OF PROSTHODONTICS, 2015, 28 (05) : 509 - 511
  • [13] Effect of the CAD-CAM and lost-wax framework fabrication techniques on the fracture strength of porcelain in metal-ceramic restorations
    Tajziehchi, Gelareh
    Ansarilari, Homeira
    Afshar, Kourosh
    [J]. DENTAL AND MEDICAL PROBLEMS, 2023, 60 (02) : 303 - 309
  • [14] Effect of CAD-CAM ceramic materials on the color match of veneer restorations
    Su, Yan
    Xin, Miao
    Chen, Xiaodong
    Xing, Wenzhong
    [J]. JOURNAL OF PROSTHETIC DENTISTRY, 2021, 126 (02): : 255.e1 - 255.e7
  • [15] Mechanical behavior of endocrowns fabricated with different CAD-CAM ceramic systems
    Dartora, Nereu Roque
    Moris, Izabela Cristina Mauricio
    Poole, Stephanie Francoi
    Bacchi, Atais
    Sousa-Neto, Manoel Damiao
    Silva-Sousa, Yara Terezinha
    Gomes, Erica Alves
    [J]. JOURNAL OF PROSTHETIC DENTISTRY, 2021, 125 (01): : 117 - 125
  • [16] Effect of Cementation Protocol on the Marginal Adaptation of Indirect Overlay Restorations Fabricated from Two Different All-Ceramic CAD/CAM Materials
    Mohammed, Zaidoon Hasan
    Majeed, Manhal A.
    [J]. JOURNAL OF RESEARCH IN MEDICAL AND DENTAL SCIENCE, 2020, 8 (07): : 518 - 525
  • [17] Influence of porcelain firing and cementation on the marginal adaptation of metal-ceramic restorations prepared by different methods
    Kaleli, Necati
    Sarac, Duygu
    [J]. JOURNAL OF PROSTHETIC DENTISTRY, 2017, 117 (05): : 656 - 661
  • [18] In vitro evaluation of marginal and internal adaptation of class II CAD/CAM ceramic restorations with different resinous bases and interface treatments
    Sandoval, Maria Jose
    Rocca, Giovanni Tommaso
    Krejci, Ivo
    Mandikos, Michael
    Dietschi, Didier
    [J]. CLINICAL ORAL INVESTIGATIONS, 2015, 19 (09) : 2167 - 2177
  • [19] In vitro evaluation of marginal and internal adaptation of class II CAD/CAM ceramic restorations with different resinous bases and interface treatments
    María José Sandoval
    Giovanni Tommaso Rocca
    Ivo Krejci
    Michael Mandikos
    Didier Dietschi
    [J]. Clinical Oral Investigations, 2015, 19 : 2167 - 2177
  • [20] ETERNAL SURFACE ALTERATION OF CAD-CAM GENERATED CERAMIC RESTORATIONS
    CALAMIA, J
    LOPRESTI, J
    SCHMITT, G
    DAVID, S
    [J]. JOURNAL OF DENTAL RESEARCH, 1995, 74 : 490 - 490