Multi-criteria optimization of the turning parameters of Ti-6Al-4V titanium alloy using the Response Surface Methodology

被引：5
|
作者：
Kluz, Rafal [1 ]
Habrat, Witold [2 ]
Bucior, Magdalena [1 ]
Krupa, Krzysztof [3 ]
Sep, Jaroslaw [1 ]
机构：
[1] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Dept Mfg & Prod Engn, al Powst Warszawy 8, PL-35959 Rzeszow, Poland
[2] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Dept Mfg Tech & Automat, al Powst Warszawy 8, PL-35959 Rzeszow, Poland
[3] Rzeszow Univ Technol, Dept Mat Sci, al Powst Warszawy 12, PL-35959 Rzeszow, Poland
来源：
EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY | 2022年 / 24卷 / 04期
关键词：
Response Surface Methodology; titanium alloy; multi-criteria optimization; turning process; ROUGHNESS; ANOVA; FLANK;
D O I：
10.17531/ein.2022.4.7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper depicts an application of Response Surface Methodology (RSM) for predicting selected parameters in turning of Ti-6Al-4V titanium alloy using polycrystalline diamond tool. Response surface plots that are generated by the model helps in determining the optimum combination of input factors (cutting speed vc and feed rate f) for best possible surface roughness (Sa), cutting force (Fc)and temperature (T) for dry and cooling turning. The methodology of multi-criteria optimization was used to establish the interaction between input parameters and given responses.
引用
收藏
页码：668 / 676
页数：9
相关论文
共 50 条
  • [21] Analysis of the micro turning process in the Ti-6Al-4V titanium alloy
    [J]. Brandão, Lincoln Cardoso (lincoln@ufsj.edu.br), 1600, Springer London (92): : 9 - 12
  • [22] Surface topography analysis and cutting parameters optimization for peripheral milling titanium alloy Ti-6Al-4V
    Yang, Dong
    Liu, Zhanqiang
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 51 : 192 - 200
  • [23] Multi-Objective Optimization of EDM Parameters Using Grey Relational Analysis for Titanium Alloy (Ti-6Al-4V)
    Palanisamy, A.
    Rekha, R.
    Sivasankaran, S.
    SathiyaNarayanan, C.
    [J]. DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 540 - +
  • [24] Surface Forming Criteria of Ti-6AL-4V Titanium Alloy under Laser Loading
    Yin, Fei
    Ye, Xia
    Yao, Hongbing
    Wei, Pengyu
    Wang, Xumei
    Cong, Jiawei
    Tong, Yanqun
    [J]. APPLIED SCIENCES-BASEL, 2021, 11 (12):
  • [25] Multi-objective optimization of material removal rate and surface roughness in electrical discharge turning of titanium alloy (Ti-6Al-4V)
    Gohil, Vikas
    Puri, Y. M.
    [J]. INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2017, 24 (06) : 429 - 436
  • [26] Laser surface nitriding of Ti-6Al-4V titanium alloy
    Masse, JE
    Mathieu, JF
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 1996, 11 (02) : 207 - 214
  • [27] Laser surface nitriding of Ti-6Al-4V titanium alloy
    ENSAM, Aix-en-Provence, France
    [J]. Mater Manuf Process, 2 (207-214):
  • [28] OPTIMIZATION OF REAMING PROCESS PARAMETERS FOR TITANIUM TI-6AL-4V ALLOY USING GREY RELATIONAL ANALYSIS
    Ahmed, Shakeel L.
    Kumar, Pradeep M.
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 2, 2016,
  • [29] Optimization of Surface Roughness and Surface Characterization of WED Machining of Titanium Ti-6Al-4V Alloy by Response Surface Method
    Doreswamy D.
    Shreyas D.S.
    Sachidananda H.K.
    Bhat S.K.
    [J]. Journal of Engineering Science and Technology Review, 2023, 16 (01) : 68 - 74
  • [30] STUDIES ON THE EFFECT OF PROCESS PARAMETERS IN TURNING OF Ti-6Al-4V ALLOY USING TOPSIS
    Rao, Charitha M.
    Rao, Shrikantha S.
    Herbert, Mervin A.
    [J]. INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2018), 2019, 577
12345