Reduction of leakage current of p-n junction by using air-bridged lateral epitaxial growth technique

被引:2
|
作者
Yamada, A [1 ]
Kawaguchi, Y [1 ]
Yokogawa, T [1 ]
机构
[1] Matsushita Elect Ind Co Ltd, Adv Technol Res Labs, Moriguchi, Osaka 5708501, Japan
关键词
D O I
10.1002/pssc.200303353
中图分类号
O7 [晶体学];
学科分类号
0702 ; 070205 ; 0703 ; 080501 ;
摘要
The reverse bias leakage current of p-n junction devices was drastically reduced by decreasing the threading dislocation density with an air-bridged lateral epitaxial growth (ABLEG) technique in comparison with growing directly on a sapphire substrate. In the wing region of ABLEG-GaN, the threading dislocation density is 10(6) cm(-2) and the wing tilt angle is 0.1degrees. The amount of reduction in the reverse bias leakage current was above two orders of magnitude. The reverse bias leakage current of p-n junction devices is well explained by the Poole-Frenkel conduction model. The energy of the Poole-Frenkel trap level was estimated to be 0.49 eV in the devices directly grown on a sapphire substrate, which have large dislocation density. On the other hand, the trap level estimated in devices on ABLEG, which have low dislocation density, was much shallower. From these results, it is thought that such a deeper trap level is related to threading dislocation in growing directly on sapphire. (C) 2003 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
引用
收藏
页码:2494 / 2497
页数:4
相关论文
共 50 条
  • [31] A MECHANISM AND A REDUCTION TECHNIQUE FOR LARGE REVERSE LEAKAGE CURRENT IN P-N-JUNCTIONS
    OHYU, K
    OHKURA, M
    HIRAIWA, A
    WATANABE, K
    IEEE TRANSACTIONS ON ELECTRON DEVICES, 1995, 42 (08) : 1404 - 1412
  • [32] Fabrication and characterization of 4H-SiC P-N junction diodes by selective-epitaxial growth using TaC as the mask
    C. Li
    P. Losee
    J. Seiler
    I. Bhat
    T. P. Chow
    Journal of Electronic Materials, 2005, 34 : 450 - 456
  • [33] Fabrication and characterization of 4H-SiC p-n junction diodes by selective-epitaxial growth using TaC as the mask
    Li, C
    Losee, P
    Seiler, J
    Bhat, I
    Chow, TP
    JOURNAL OF ELECTRONIC MATERIALS, 2005, 34 (04) : 450 - 456
  • [34] Air-bridged lateral growth of an Al0.98Ga0.02N layer by introduction of porosity in an AlN buffer -: art. no. 151906
    Wang, T
    Bai, J
    Parbrook, PJ
    Cullis, AG
    APPLIED PHYSICS LETTERS, 2005, 87 (15) : 1 - 3
  • [35] Observation of Interface Defects in Diamond Lateral p-n-Junction Diodes and Their Effect on Reverse Leakage Current
    Iwasaki, Takayuki
    Suwa, Taisuke
    Yaita, Junya
    Kato, Hiromitsu
    Makino, Toshiharu
    Ogura, Masahiko
    Takeuchi, Daisuke
    Yamasaki, Satoshi
    Hatano, Mutsuko
    IEEE TRANSACTIONS ON ELECTRON DEVICES, 2017, 64 (08) : 3298 - 3302
  • [36] Characterization of a diamond p-n junction using electron-beam-induced current and cathodoluminescence
    Sekiguchi, T
    Koizumi, S
    APPLIED PHYSICS LETTERS, 2002, 81 (11) : 1987 - 1989
  • [37] Determination of Lateral Extension of Extrinsic Photon Recycling in p-GaN by Using Transmission-Line-Model Patterns Formed with GaN p-n Junction Epitaxial Layers
    Mochizuki, Kazuhiro
    Mishima, Tomoyoshi
    Ishida, Yuya
    Hatakeyama, Yoshitomo
    Nomoto, Kazuki
    Kaneda, Naoki
    Tshuchiya, Tadayoshi
    Terano, Akihisa
    Tsuchiya, Tomonobu
    Uchiyama, Hiroyuki
    Tanaka, Shigehisa
    Nakamura, Tohru
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2013, 52 (08)
  • [38] Reduction of leakage current for shallow n+/p junction fabricated using C49TiSi2 as a diffusion source
    Sohn, DK
    Park, JS
    Bae, JU
    Lee, BH
    Han, CH
    Park, JW
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1999, 146 (10) : 3837 - 3842
  • [39] Electrochemical etch-stop technique using diffused P-N junction for silicon micromechanical structures
    Chand, A
    Singh, J
    Chandra, S
    Rustagi, SC
    SEMICONDUCTOR DEVICES, 1996, 2733 : 484 - 486
  • [40] Potential profile evaluation of a diamond lateral p-n junction diode using Kelvin probe force microscopy
    Shirota, Kazuya
    Takeuchi, Daisuke
    Kato, Hiromitsu
    Makino, Toshiharu
    Ogura, Masahiko
    Okushi, Hideyo
    Yamasaki, Satoshi
    PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2015, 212 (11): : 2589 - 2594