Evaluation on strength parameters of self-compacting concrete incorporated with carbon and glass fibres

被引:2
|
作者
Jeevetha, T. [1 ]
VijayaShanthy, S. [1 ]
Sivakumar, A. [2 ]
Singh, N. Bagath [3 ]
机构
[1] Kongu Engn Coll, Dept Civil Engn, Perundurai 638060, Tamil Nadu, India
[2] Kongu Engn Coll, Dept Mech Engn, Perundurai 638060, Tamil Nadu, India
[3] VSB Engn Coll, Dept Mech Engn, Karur 639111, Tamil Nadu, India
关键词
Self-Compacting Concrete; Micro silica; High strength concrete; Workability;
D O I
10.1016/j.matpr.2020.02.743
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Self-compacting concrete (SCC) is a lean concrete brew which can consolidate under its weight. Because of its dynamic nature SCC finds its space in critical situations and segments with thronged reinforcement. Extensive usage of SCC helps to eradicate phonic damages on the worksite meagerly induced by the shaking of concrete. The supremacy of using SCC requires less time to site the concrete in substantial sections. By differing micro silica ratio as partial replacement of cement an effort is made to read the strength characteristics of SCC. Micro silica has the versatile property, and when added as the admixture in the initial stages, concrete can perform better both in the firm and coarsened state. EFNARC specifications have been used to finalize the trial mixes with various percentages of micro silica (5%, 10%). In this study, special care has been taken to study the staging of a concrete mix with micro silica, super plasticizer, and VMA. The identified compressive strength of cubes at 5% replacement is 28% elevated than that of a 10% replacement. Although there are more experiments with the proportionate blend the good attempt is made with the available vernacular fibres to study the performance of fabricated high strength concrete in a brief manner. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the International Conference on Advances in Materials Research-2019.
引用
收藏
页码:708 / 712
页数:5
相关论文
共 50 条
  • [41] Fresh properties of self-compacting rubberized concrete incorporated with fly ash
    Erhan Güneyisi
    Materials and Structures, 2010, 43 : 1037 - 1048
  • [42] Pull-out behaviour of steel fibres in self-compacting concrete
    Holschemacher, Klaus
    Klug, Yvette
    1st International Symposium on Design, Performance and Use of Self-Consolidating Concrete, 2005, 42 : 523 - 532
  • [43] Influence of steel fibres geometry on chosen profiles of self-compacting concrete
    Szwabowski, Janusz
    Ponikiewski, Tomasz
    CEMENT WAPNO BETON, 2008, 13 (01): : 3 - +
  • [44] Analysis of mechanical properties in self-compacting concrete enhanced with steel fibres
    Karuppasamy, Mukilan
    Balakrishnan, Baranitharan
    Chandran, Karthik
    Gheisari, Mehdi
    Rezaeiye, Payam Porkar
    Andrievsky, Boris
    MICRO & NANO LETTERS, 2024, 19 (04)
  • [45] The effect of casting by local moulds filling on the steel fibres distribution of self-compacting concrete beams and their strength
    Ponikiewski, Tomasz
    Golaszewski, Jacek
    CEMENT WAPNO BETON, 2013, 18 (02): : 91 - +
  • [46] Production of self-compacting concrete incorporated with red clay industry waste
    Cardoso dos Santos, Rafael Francisco
    de Castro, Alessandra Lorenzetti
    Goncalves, Karoline Mariana
    MATERIA-RIO DE JANEIRO, 2018, 23 (03):
  • [47] Fresh properties of self-compacting rubberized concrete incorporated with fly ash
    Guneyisi, Erhan
    MATERIALS AND STRUCTURES, 2010, 43 (08) : 1037 - 1048
  • [48] Stressstrain behaviour of fire exposed self-compacting glass concrete
    Ling, Tung-Chai
    Poon, Chi-Sun
    FIRE AND MATERIALS, 2013, 37 (04) : 297 - 310
  • [49] Recycled glass replacement as fine aggregate in self-compacting concrete
    Yasser SHARIFI
    Mahmoud HOUSHIAR
    Behnam AGHEBATI
    Frontiers of Structural and Civil Engineering, 2013, 7 (04) : 419 - 428
  • [50] Recycled glass replacement as fine aggregate in self-compacting concrete
    Sharifi Y.
    Houshiar M.
    Aghebati B.
    Frontiers of Structural and Civil Engineering, 2013, 7 (4) : 419 - 428