Effects of sintering aids on mechanical and dielectric properties of Si3N4 ceramics

被引：13
|
作者：
Zhao, D. L. [1 ]
Zhang, Y. J. [1 ]
Gong, H. Y. [1 ]
Nie, L. F. [1 ]
Zhao, L. [1 ]
机构：
[1] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Peoples R China
来源：
MATERIALS RESEARCH INNOVATIONS | 2010年 / 14卷 / 04期
关键词：
Si3N4; ceramics; Gas pressure sintering; Sintering aids; Dry gel of YAG; SILICON-NITRIDE; MICROSTRUCTURE; YB2O3; Y2O3;
D O I：
10.1179/143307510X12777574295424
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Si3N4 ceramics with different sintering aids are prepared by gas pressure sintering at 1800 degrees C under 8 MPa N-2 atmosphere. The mechanical and microwave dielectric properties of the Si3N4 ceramics with and without sintering aids are investigated. The results show that the sintering aids have a significant impact on the densification and mechanical properties of Si3N4 ceramics. Of all, the Si3N4 ceramics using the dry gel of yttrium aluminium garnet as sintering aids exhibit the maximum bending strength and fracture toughness, reaching 395 MPa and 4.25 MPa m(1/2) respectively. However, the dielectric properties of Si3N4 ceramics are similar to that using the other two sintering aids. The improved mechanical properties of the Si3N4 ceramics are attributed to the formation of rod-like beta-Si3N4 particles.
引用
收藏
页码：338 / 341
页数：4
相关论文
共 50 条
  • [31] Effects of different Si3N4 starting powders and sintering conditions on the grain morphology and mechanical properties of α-SiAlON ceramics
    Kushan, SR
    Mandal, H
    EURO CERAMICS VII, PT 1-3, 2002, 206-2 : 417 - 420
  • [32] Effect of aluminum on the sintering of β-Si3N4 ceramics
    Zhang Ling
    Li Fushen
    Xue Wendong
    Sun Jialin
    Lu Xionggang
    RARE METAL MATERIALS AND ENGINEERING, 2007, 36 : 334 - 336
  • [33] Comparison in microstructure and mechanical properties of porous Si3N4 ceramics with SiC and Si3N4 coatings
    Li, Xiangming
    Yin, Xiaowei
    Zhang, Litong
    Pan, Tianhao
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 527 (1-2): : 103 - 109
  • [34] Effect of MgSiN2-Y2O3 Sintering Aids on Mechanical Properties and Thermal Conductivity of Si3N4 Ceramics
    Li C.
    Zhang B.
    Hu J.
    Wang S.
    Shi Z.
    Shi, Zhongqi (zhongqishi@xjtu.edu.cn), 1600, Chinese Ceramic Society (49): : 2556 - 2562
  • [35] Influence of phase formation on dielectric properties of Si3N4 ceramics
    Li, Jun-Qi
    Luo, Fa
    Zhu, Dong-Mei
    Zhou, Wan-Cheng
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2007, 90 (06) : 1950 - 1952
  • [36] Role of sintering aids in phase transformation, microstructure and mechanical properties of Si3N4/SiC nanocomposites
    Yang, JF
    Ohji, T
    Niihara, K
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2001, 109 (11) : 920 - 923
  • [37] Thermal and mechanical properties of Si3N4 ceramics obtained via two-step sintering
    Wang, Yuelong
    Tian, Jianjun
    Wu, Haoyang
    Jia, Baorui
    Li, Xingyu
    Zhang, Yiming
    Zhang, Zhirui
    Qu, Xuanhui
    Qin, Mingli
    CERAMICS INTERNATIONAL, 2022, 48 (13) : 18294 - 18301
  • [38] Effect of nano-sized sintering additives on microstructure and mechanical properties of Si3N4 ceramics
    Kumar, Anil
    Gokhale, Aditya
    Ghosh, Sudarsan
    Aravindan, Sivanandam
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 750 : 132 - 140
  • [39] Sintering shrinkage behavior and mechanical properties of HfO 2-added Si3N4 ceramics
    Horikawa, Daisuke
    Tatami, Junichi
    Wakihara, Toru
    Komeya, Katsutoshi
    Meguro, Takeshi
    Key Engineering Materials, 2009, 403 : 35 - 38
  • [40] Mechanical properties and thermal conductivity of Si3N4 ceramics with YF3 and MgO as sintering additives
    Liang, Hanqin
    Zeng, Yuping
    Zuo, Kaihui
    Xia, Yongfeng
    Yao, Dongxu
    Yin, Jinwei
    CERAMICS INTERNATIONAL, 2016, 42 (14) : 15679 - 15686
12345