Effects of sintering aids on mechanical and dielectric properties of Si3N4 ceramics

被引:13
|
作者
Zhao, D. L. [1 ]
Zhang, Y. J. [1 ]
Gong, H. Y. [1 ]
Nie, L. F. [1 ]
Zhao, L. [1 ]
机构
[1] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Peoples R China
关键词
Si3N4; ceramics; Gas pressure sintering; Sintering aids; Dry gel of YAG; SILICON-NITRIDE; MICROSTRUCTURE; YB2O3; Y2O3;
D O I
10.1179/143307510X12777574295424
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Si3N4 ceramics with different sintering aids are prepared by gas pressure sintering at 1800 degrees C under 8 MPa N-2 atmosphere. The mechanical and microwave dielectric properties of the Si3N4 ceramics with and without sintering aids are investigated. The results show that the sintering aids have a significant impact on the densification and mechanical properties of Si3N4 ceramics. Of all, the Si3N4 ceramics using the dry gel of yttrium aluminium garnet as sintering aids exhibit the maximum bending strength and fracture toughness, reaching 395 MPa and 4.25 MPa m(1/2) respectively. However, the dielectric properties of Si3N4 ceramics are similar to that using the other two sintering aids. The improved mechanical properties of the Si3N4 ceramics are attributed to the formation of rod-like beta-Si3N4 particles.
引用
收藏
页码:338 / 341
页数:4
相关论文
共 50 条
  • [1] Effects of sintering aids on the microstructure and mechanical properties of laminated Si3N4/BN ceramics
    Li, CW
    Wang, CA
    Huang, Y
    Zan, QF
    Zhao, SK
    MATERIALS LETTERS, 2003, 57 (22-23) : 3473 - 3478
  • [2] Effects of sintering temperature and sintering additive on microstructure, mechanical and dielectric properties of porous Si3N4 ceramics by gelcasting
    Yin, Shuang
    Zhang, Yao
    Wan, Wei
    Fang, Xia
    Ma, Haiqiang
    Xie, Xinchun
    Li, Tianyu
    Jiang, Xuewen
    Xie, Aiwen
    Liu, Liqiang
    Zhou, Cong
    Zuo, Ruzhong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 979
  • [3] EFFECTIVE SINTERING AIDS FOR SI3N4 CERAMICS
    NEGITA, K
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1985, 4 (06) : 755 - 758
  • [4] Effects of sintering additives on mechanical properties and microstructure of Si3N4 ceramics by microwave sintering
    Xu, Weiwei
    Yin, Zengbin
    Yuan, Juntang
    Wang, Zhenhua
    Fang, Yihang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 684 : 127 - 134
  • [5] Dielectric and mechanical properties of porous Si3N4 ceramics prepared via low temperature sintering
    Xia, Yongfeng
    Zeng, Yu-Ping
    Jiang, Dongliang
    CERAMICS INTERNATIONAL, 2009, 35 (04) : 1699 - 1703
  • [6] Effect of Si3N4 nanowires on the mechanical properties and dielectric constant of porous Si3N4 ceramics
    Zhang, Tianxiang
    Zhang, Xinghong
    Han, Wenbo
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2019, 127 (09) : 602 - 605
  • [7] Effects of sintering additive and β-Si3N4 phase contents on the properties of porous Si3N4 ceramics
    Yu, Fang-Li
    Yu, Ping-Ping
    Wang, Jian-Zhi
    Yang, Jian-Feng
    Rengong Jingti Xuebao/Journal of Synthetic Crystals, 2011, 40 (03): : 772 - 778
  • [8] Microstructure and mechanical properties of tantalum carbide ceramics: Effects of Si3N4 as sintering aid
    Liu, Limeng
    Geng, Guihong
    Jiang, Yong
    Wang, Yujing
    Hai, Wanxiu
    Sun, Wenzhou
    Chen, Yuhong
    Wu, Laner
    CERAMICS INTERNATIONAL, 2017, 43 (06) : 5136 - 5144
  • [9] Effect of sintering additive content on mechanical and dielectric properties of porous Si3N4/BN composite ceramics
    Wang, C. (wangca@tsinghua.edu.cn), 2012, Chinese Ceramic Society (40):
  • [10] Mechanical properties of Si3N4 + β-Si3N4 whisker reinforced ceramics
    Dusza, J.
    Sajgalik, P.
    Journal of the European Ceramic Society, 1992, 9 (01) : 9 - 17