Numerical simulation on carburizing and quenching of gear ring

被引：17

作者：

Song Guang-sheng ^{[1
]}

Liu Xiang-hua ^{[2
]}

Wang Guo-dong ^{[2
]}

Xu Xiang-qiu ^{[3
]}

机构：

[1] Shenyang Inst Aeronaut Engn, Dept Mat Engn, Shenyang 110034, Liaoning, Peoples R China

[2] Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110004, Liaoning, Peoples R China

[3] FAW Grp Corp, Ctr Res & Dev, Changchun 100034, Jilin, Peoples R China

来源：

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL | 2007年 / 14卷 / 06期

关键词：

carburization; FEM; quenching; martensite transformation; residual stress;

D O I：

10.1016/S1006-706X(07)60089-2

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The carburizing process of the gear ring was simulated by taking into account the practical carburizing and quenching techniques of the gear ring and by solving the diffusion equation. The carbon content distribution in the carburized layer was obtained. Based on the results, the quenching process of the gear ring was then simulated using the metallic thermodynamics and FEM; it was found that the carburization remarkably affects the quenching process. Microstructures and stress distributions of the gear ring in the quenching process were simulated, and the results are confirmed by experiments.

引用

页码：47 / 52

页数：6

共 50 条

[31] Numerical simulation and experimental study on radiation noise of double-ring gear reducer
Lin, Teng-Jiao
Liao, Yong-Jun
Li, Run-Fang
Liu, Wen
Zhendong yu Chongji/Journal of Vibration and Shock, 2010, 29 (03): : 43 - 47
[32] A study on steel synchronizer gear ring precision forging based on numerical simulation method
Zhou Jie
Xue Song
Proceedings of the International Conference on Mechanical Transmissions, Vols 1 and 2, 2006, : 914 - 917
[33] Quenching Process Simulation of Spur Gear Based on ANSYS
Zhang, JingDong
Yang, Kuan
Zhao, Shenglian
Zheng, Bin
7TH ANNUAL INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND ENVIRONMENTAL ENGINEERING, 2020, 735
[34] Inside Residual Stress Analysis of Carburizing-Nitriding Quenching Spur Gear by Neutron Diffraction Method
Mukai, Ryuji
Ju, Dong Ying
Suzuki, Hiroshi
ADVANCED MATERIALS SCIENCE AND TECHNOLOGY, 2009, 614 : 149 - 154
[35] Identification of process parameters affecting distortion of disks for gear manufacture Part II: heating, carburizing, quenching
Clausen, B.
Frerichs, F.
Kohlhoff, T.
Luebben, Th.
Prinz, C.
Rentsch, R.
Soelter, J.
Surm, H.
Stoebener, D.
Klein, D.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2009, 40 (5-6) : 361 - 367
[36] COMPARISON AND ANALYSIS ON THE EFFECTS OF OIL-QUENCHING AND SALT-QUENCHING FOR CARBURIZED GEAR RING
Wang, Xin
Ling, Jinlong
ARCHIVES OF METALLURGY AND MATERIALS, 2023, 68 (04) : 1267 - 1273
[37] NUMERICAL STUDY OF CARBURIZING AND QUENCHING THERMOCHEMICAL TREATMENT OF A DRIVE SHAFT EMPLOYING EXPERIMENT DESIGN
Rodriguez-Morales, E.
Montes-Rodriguez, J. J.
Luna-Bustamante, A. G.
Balderas-Puga, D.
Luna-Gonzalez, C.
REVISTA MEXICANA DE INGENIERIA QUIMICA, 2015, 14 (02): : 405 - 413
[38] Dynamic simulation of planetary gear with tooth root crack in ring gear
Chen, Zaigang
Shao, Yimin
ENGINEERING FAILURE ANALYSIS, 2013, 31 : 8 - 18
[39] Dynamic simulation of planetary gear set with flexible spur ring gear
Chen, Zaigang
Shao, Yimin
Su, Daizhong
JOURNAL OF SOUND AND VIBRATION, 2013, 332 (26) : 7191 - 7204
[40] Damage Evaluation of Carburizing Gear for Remanufacturing
Kanazawa, Tomohisa
Hayakawa, Masao
Yoshimoto, Mitsuhiro
Tahara, Yuuki
Hata, Norihito
Meguro, Susumu
Hiroto, Takanobu
Matsushita, Yoshitaka
Sugawara, Michio
JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2021, 85 (05) : 198 - 206

← 1 2 3 4 5 →