CFD modeling and thermodynamic analysis of a concept of a MILD-OXY combustion large scale pulverized coal boiler

被引：49

作者：

Adamczyk, Wojciech P. ^{[1
]}

Bialecki, Ryszard A. ^{[1
]}

Ditaranto, Mario ^{[2
]}

Gladysz, Pawel ^{[1
]}

Haugen, Nils Erland L. ^{[2
]}

Katelbach-Wozniak, Anna ^{[1
]}

Klimanek, Adam ^{[1
]}

Sladek, Slawomir ^{[1
]}

Szlek, Andrzej ^{[1
]}

Wecel, Gabriel ^{[1
]}

机构：

[1] Silesian Tech Univ, Inst Thermal Technol, Konarskiego 22, PL-44100 Gliwice, Poland

[2] SINTEF Energi AS, Sem Saelands Vei 11, N-7034 Trondheim, Norway

来源：

ENERGY | 2017年 / 140卷

关键词：

Oxycombustion; MILD combustion; CFD model; Reduced oxygen demand; Reduced flue gas recycling ratio; FUEL COMBUSTION;

D O I：

10.1016/j.energy.2017.03.130

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A concept of a large scale pulverized coal boiler working in the oxycombustion mode has been proposed. The combustion chamber has been designed using the Moderate and Intensive Low-oxygen Dilution (MILD) combustion technology. By screening CFD solutions of several geometric configurations the best one has been selected, for which the dependence of the oxygen excess ratio and recirculation rate of the flue gases analyzed onto the efficiency of the combustion chamber has been investigated. The results of the CFD simulations have been then embedded into a process model of the entire plant. The preliminary simulations show the possibility of efficiency increase of more than 3% points. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：1305 / 1315

页数：11

共 50 条

[21] Experiment investigation of coal MILD-Oxy combustion integrated with flue gas recirculation at a 0.3 MWth furnace
Mao, Zhihui
Zhang, Liqi
Zhu, Xinyang
Zheng, Chuguang
FUEL PROCESSING TECHNOLOGY, 2017, 162 : 126 - 134
[22] Experiment and thermodynamic analysis on mineral formation of ceme -nt clinker cogeneration from coal in pulverized coal combustion boiler
Jiao, You-Zhou
Shi, Zheng-lun
PROGRESS IN POWER AND ELECTRICAL ENGINEERING, PTS 1 AND 2, 2012, 354-355 : 240 - +
[23] Analysis of the errors associated with typical pulverized coal char combustion modeling assumptions for oxy-fuel combustion
Hecht, Ethan S.
Shaddix, Christopher R.
Lighty, JoAnn S.
COMBUSTION AND FLAME, 2013, 160 (08) : 1499 - 1509
[24] CFD modeling of non-premixed combustion of pulverized coal in a furnace
Naik M.P.K.
Dewangan S.K.
Computational Thermal Sciences, 2017, 9 (03): : 195 - 211
[25] Modeling of ash deposition in large-scale combustion facilities burning pulverized coal
Wang, HF
Harb, JN
PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 1997, 23 (03) : 267 - 282
[26] Numerical study of combustion characteristics for pulverized coal under oxy-MILD operation
Tu, Yaojie
Liu, Hao
Chen, Sheng
Liu, Zhaohui
Zhao, Haibo
Zheng, Chuguang
FUEL PROCESSING TECHNOLOGY, 2015, 135 : 80 - 90
[27] PDA research on a novel pulverized coal combustion technology for a large utility boiler
Fan, Weidong
Li, Youyi
Lin, Zhengchun
Zhang, Mingchuan
ENERGY, 2010, 35 (05) : 2141 - 2148
[28] CFD modeling of oxy-coal combustion in circulating fluidized bed
Zhou, Wu
Zhao, Changsui
Duan, Lunbo
Liu, Daoyin
Chen, Xiaoping
INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL, 2011, 5 (06) : 1489 - 1497
[29] Influence of gas composition and properties on the combustion and heat transfer characteristics of pulverized oxy-coal boiler
Xie, Yan
Wang, Heyang
Zhang, Chaoqun
Liu, Xin
Zhao, Jun
INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL, 2022, 113
[30] ANALYSIS OF COMBUSTION MECHANISM AND COMBUSTION OPTIMIZATION OF A 300MW PULVERIZED COAL BOILER
Ma, Xiaoqian
Yang, Mo
Zhang, Yuwen
FRONTIERS IN HEAT AND MASS TRANSFER, 2016, 7

← 1 2 3 4 5 →