Mechanism of brittle cracking for high-purity Cr18Mo2 ferritic stainless steel

被引：0
|
作者：
Liu, B [1 ]
Liu, SY [1 ]
Wang, XZ [1 ]
机构：
[1] MMI, Cent Iron & Steel Res Inst, Beijing 100081, Peoples R China
来源：
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL | 1997年 / 4卷 / 02期
关键词：
ferritic stainless steel; embrittlement; cleavage;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
A study has been carried out on the effect of continuous cooling with different rate from 1 200 degrees C on the brittleness of vacuum melted, extra-low interstitial Cr18Mo2 ferritic stainless steels. The ductile-brittle transition temperature was found to be the lowest after water cooling and the highest after furnace cooling. The increase of brittleness with cooling rate decrease is attributed to the formation of more nitrides. With the increase of titanium content the ductile-brittle transition temperature increases significantly. A low transition temperature occurred in steel containing 0.18 % Nb, and further increase of niobium brought about an increase of transition temperature. The transition temperature of ferritic stainless steel was raised severely by the precipitation of nitrides (Cr2N, Cr2Nb2N2 and TiN)and oxides (Al2O3) promoting brittle crack initiation.
引用
收藏
页码：33 / 37
页数：5
相关论文
共 50 条
  • [31] Effect of Nb Addition on Dendrite Growth and Equiaxed Grain Ratio of Fe-20 Pct Cr High-Purity Ferritic Stainless Steel
    Yuyang Hou
    Shijian Li
    Guoguang Cheng
    Metallurgical and Materials Transactions A, 2018, 49 : 5445 - 5457
  • [32] Effect of Nb Addition on Dendrite Growth and Equiaxed Grain Ratio of Fe-20 Pct Cr High-Purity Ferritic Stainless Steel
    Hou, Yuyang
    Li, Shijian
    Cheng, Guoguang
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (11): : 5445 - 5457
  • [33] Microstructure and mechanical properties of friction stir welded 18Cr-2Mo ferritic stainless steel thick plate
    Han, Jian
    Li, Huijun
    Zhu, Zhixiong
    Barbaro, Frank
    Jiang, Laizhu
    Xu, Haigang
    Ma, Li
    Materials and Design, 2014, 63 : 238 - 246
  • [34] Microstructure and mechanical properties of friction stir welded 18Cr-2Mo ferritic stainless steel thick plate
    Han, Jian
    Li, Huijun
    Zhu, Zhixiong
    Barbaro, Frank
    Jiang, Laizhu
    Xu, Haigang
    Ma, Li
    MATERIALS & DESIGN, 2014, 63 : 238 - 246
  • [35] TEXTURE AND ANISOTROPY OF LOW-INTERSTITIAL 18 PCT CR-2 PCT MO FERRITIC STAINLESS-STEEL
    DAVISON, RM
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1975, 6 (12): : 2243 - 2248
  • [36] Microstructure and mechanical properties of friction stir welded 18Cr-2Mo ferritic stainless steel thick plate
    Han, Jian, 1600, Elsevier Ltd (63):
  • [37] INFLUENCE OF HEAT-TREATMENT ON THE SENSITIZATION OF 18CR-2MO-TI STABILIZED FERRITIC STAINLESS-STEEL
    DEVINE, TM
    RITTER, AM
    DRUMMOND, BJ
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1981, 12 (12): : 2063 - 2069
  • [38] TEM observation and fracture morphology in the CGHAZ of a new 0Cr18Mo2Ti ferritic stainless steel
    Li, YJ
    Zhang, YL
    Sun, B
    Wang, J
    BULLETIN OF MATERIALS SCIENCE, 2002, 25 (05) : 361 - 366
  • [39] Tem observation and fracture morphology in the cghaz of a new 0cr18mo2ti ferritic stainless steel
    Li Yajiang
    Zhang Yonglan
    Sun Bin
    Wang Juan
    Bulletin of Materials Science, 2002, 25 (5) : 361 - 366
  • [40] EFFECTS OF Ti, Mn AND S ON THE PITTING CORROSION PROPERTIES OF 18Cr-2Mo FERRITIC STAINLESS STEEL.
    Andersson, B.R.T.
    Solly, B.
    Scandinavian Journal of Metallurgy, 1975, 4 (02): : 85 - 88
12345