Fretting Fatigue Cracking of a Center Guide Bolt Supporting the Combustion Chamber in a Heavy-duty Gas Turbine Engine

被引：0
|
作者：
Neidel, A. [1 ]
Fischer, B. [1 ]
Gaedicke, T. [1 ]
机构：
[1] Siemens AG, Energy Sect, Gasturbinenwerk Berlin, Werkstoffpruflab, Huttenstr 12, D-10548 Berlin, Germany
来源：
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY | 2018年 / 55卷 / 03期
关键词：
PREDICTION;
D O I：
10.3139/147.110498
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The slotted center guide bolt of the center guide feature of the lower part of the outer shell of an annular combustion chamber was found fractured in a heavy-duty gas turbine engine used for power generation, after approximately 5.500 operating hours. The incident was a one-off event and not a recurring incident. No similar events were reported from the fleet; hence the failure was not considered a field issue. The metallurgical root cause investigation that was ordered to determine the failure mechanism revealed that the incident center guide bolt failed by fretting fatigue cracking, a high cycle fatigue (HCF) phenomenon.
引用
收藏
页码：158 / 175
页数：18
相关论文
共 50 条
  • [31] Experimental and numerical study the effect of combustion chamber shapes on combustion and emissions characteristics in a heavy-duty lean burn SI natural gas engine coupled with detail combustion mechanism
    Zhang, Shiheng
    Duan, Xiongbo
    Liu, Yiqun
    Guo, Genmiao
    Zeng, Haibo
    Liu, Jingping
    Lai, Ming-Chia
    Talekar, Apoorv
    Yuan, Zhipeng
    FUEL, 2019, 258
  • [32] Impact of ignition energy on the combustion performance of an SI heavy-duty stoichiometric operation natural gas engine
    Wang, Zhongshu
    Su, Xing
    Wang, Xiaoyan
    Jia, Demin
    Wang, Dan
    Li, Jiarui
    FUEL, 2022, 313
  • [33] Study on the Combustion and Emission Characteristic of a Heavy-Duty Natural Gas/Ammonia RCCI Engine with Diesel Ignition
    Zhou, Weijian
    Wang, Hongnan
    Zhou, Song
    Shreka, Majed
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2024, 2024
  • [34] Humidity Effects on Corrosion-Assisted Fatigue Fracture of Heavy-Duty Gas Turbine Compressor Blades
    Poursaeidi, Esmaeil
    Arablu, Masoud
    JOURNAL OF PROPULSION AND POWER, 2013, 29 (05) : 1009 - 1016
  • [35] Hydrogen pre-chamber combustion at lean-burn conditions on a heavy-duty diesel engine: A computational study
    Liu, Xinlei
    Aljabri, Hammam
    Silva, Mickael
    AlRamadan, Abdullah S.
    Ben Houidi, Moez
    Cenker, Emre
    Im, Hong G.
    FUEL, 2023, 335
  • [36] Combustion and emissions of an ammonia heavy-duty engine with a hydrogen-fueled active pre-chamber ignition system
    Wang, Bowen
    Yang, Can
    Chen, Yuxin
    Zu, Zhaoyang
    Lin, Hao
    Bai, Chong
    Yin, Yong
    Cheng, Xiaobei
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2024, 90 : 419 - 430
  • [37] SUPPORTING STRUCTURE PERFORMANCES ANALYSIS OF HEAVY-DUTY GAS TURBINE BASED ON FLUID-SOLID COUPLING METHOD
    Xu, Guohui
    Zhou, Jian
    Lu, Mingjian
    Geng, Haipeng
    Sun, Yanhua
    Yu, Lie
    Yang, Lihua
    Zhao, Shiquan
    Qi, Xiaobing
    Liu, Xueyun
    Fang, Yu
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2015, VOL 5C, 2015,
  • [38] NUMERICAL RE-DESIGN OF A HEAVY DUTY GAS TURBINE HYDROGEN-FIRED COMBUSTION CHAMBER
    Marini, Alessandro
    Riccio, Giovanni
    Martelli, Francesco
    Sigali, Stefano
    Cocchi, Stefano
    PROCEEDINGS OF THE ASME TURBO EXPO 2010, VOL 2, PTS A AND B, 2010, : 747 - 757
  • [39] Metallurgical Failure Investigation of a Deformed and Cracked Lashing-Load Ring of a Heavy-Duty Gas Turbine Engine
    Neidel, A.
    Riesenbeck, S.
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2016, 53 (01): : 50 - 57
  • [40] Metallurgical failure investigation of a deformed and cracked lashing-load ring of a heavy-duty gas turbine engine
    Werkstofftechnische Schadensklärung einer verformten und gerissenen Anhängeö se einer Großgasturbine
    2016, Carl Hanser Verlag (53):
12345