A new approach for determining in-situ rock strength while drilling

被引：18
|
作者：
Hoberock, LL
Bratcher, GJ
机构：
[1] School of Mechanical and Aerospace Engineering, Oklahoma State University, Stillwater, OK, 74078-5016
[2] Xerox Corporation, Oklahoma City, OK
来源：
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME | 1996年 / 118卷 / 04期
关键词：
D O I：
10.1115/1.2793870
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
A new method is developed for determining rock strength while drilling with a tri-cone roller bit. The technique employs the well-known ''drill-off'' test, using commonly measured drilling data, and does not require knowledge of drill bit parameters. The method was evaluated with drill-off test darn collected from the Gas Research Institute's SFE (staged field experiment) well no. 4 and compared with calculated in-situ compressive rock strengths provided by Hareland (1992). The results indicate that the proposed approach produces reasonable results and is easily implemented.
引用
收藏
页码：249 / 255
页数：7
相关论文
共 50 条
  • [21] Deep Learning for Intelligent Prediction of Rock Strength by Adopting Measurement While Drilling Data
    Zhao, Ruijie
    Shi, Shaoshuai
    Li, Shucai
    Guo, Weidong
    Zhang, Tao
    Li, Xiansen
    Lu, Jie
    INTERNATIONAL JOURNAL OF GEOMECHANICS, 2023, 23 (04)
  • [22] Uniaxial Compressive Strength Model of Rock Using Measurement While Drilling (MWD) Data
    Wang Y.-H.
    Yu Q.-L.
    Niu P.
    Li Y.
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2023, 44 (08): : 1168 - 1176
  • [23] Determining Method of Tensile Strength of Rock Based on Friction Characteristics in the Drilling Process
    Wang, Haoteng
    He, Mingming
    ROCK MECHANICS AND ROCK ENGINEERING, 2023, 56 (06) : 4211 - 4227
  • [24] Determining Method of Tensile Strength of Rock Based on Friction Characteristics in the Drilling Process
    Haoteng Wang
    Mingming He
    Rock Mechanics and Rock Engineering, 2023, 56 : 4211 - 4227
  • [25] The identification method for rock strength and joint while drilling based on cutting energy density
    Gao, Hong-ke
    Wang, Qi
    Ma, Feng-lin
    Jiang, Bei
    Zhai, Da-hu
    Cai, Song-lin
    Zhang, Chong
    Bian, Zhen-guo
    Liu, Guang-jie
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2024, 31 (02) : 621 - 635
  • [26] Determination of the in situ block size distribution in fractured rock, an approach for comparing in-situ rock with rock sieve analysis
    Jern, M
    ROCK MECHANICS AND ROCK ENGINEERING, 2004, 37 (05) : 391 - 401
  • [27] Determination of the In situ Block Size Distribution in Fractured Rock, an Approach for Comparing In-situ Rock with Rock Sieve Analysis
    M. Jern
    Rock Mechanics and Rock Engineering, 2004, 37 : 391 - 401
  • [28] In-situ digital profiling of soil to rock strength from drilling process monitoring of 200 m deep drillhole in loess ground
    Wang, X. F.
    Zhang, M. S.
    Yue, Z. Q.
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2021, 142
  • [29] In-situ estimation of uniaxial compressive strength of igneous rock based on point load strength
    Sha P.
    Zhang Q.-T.
    Lin J.
    Wu F.-Q.
    Yantu Lixue/Rock and Soil Mechanics, 2020, 41 : 534 - 542and550
  • [30] LOGGING WHILE DRILLING TECHNOLOGY FOR ROCK ENGINEERING
    VLADUT, T
    PROCEEDINGS - SIXTH INTERNATIONAL CONGRESS ON ROCK MECHANICS, VOL 3, 1989, : 1519 - 1520
12345