A new approach for determining in-situ rock strength while drilling

被引：18
|
作者：
Hoberock, LL
Bratcher, GJ
机构：
[1] School of Mechanical and Aerospace Engineering, Oklahoma State University, Stillwater, OK, 74078-5016
[2] Xerox Corporation, Oklahoma City, OK
来源：
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME | 1996年 / 118卷 / 04期
关键词：
D O I：
10.1115/1.2793870
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
A new method is developed for determining rock strength while drilling with a tri-cone roller bit. The technique employs the well-known ''drill-off'' test, using commonly measured drilling data, and does not require knowledge of drill bit parameters. The method was evaluated with drill-off test darn collected from the Gas Research Institute's SFE (staged field experiment) well no. 4 and compared with calculated in-situ compressive rock strengths provided by Hareland (1992). The results indicate that the proposed approach produces reasonable results and is easily implemented.
引用
收藏
页码：249 / 255
页数：7
相关论文
共 50 条
  • [1] Real-time rock strength and fractures determination based on Measurement while drilling method via rock drillability index: an in-situ study
    Xiao, Fangyuan
    Zhang, Kai
    Xue, Xinran
    Ma, Bailong
    Jiang, Tao
    Fu, Lianjie
    BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 2025, 84 (02)
  • [2] Rock strength identification while drilling based on percussive rotary drilling
    Liu Yong-Bin
    Zhang Xiao-ping
    Li Xin-fang
    Li De-hong
    Chen Guang-jun
    Liu Xiao-bo
    Xiong Xue-fei
    Yang Lang
    Li Yu-sheng
    ROCK AND SOIL MECHANICS, 2024, 45 (03) : 857 - 866
  • [3] A new method for determining strength parameters of rock using digital drilling technology
    Qiang, Guo
    Ma, Xudong
    Liu, Xinxing
    FRONTIERS IN EARTH SCIENCE, 2023, 11
  • [4] Rock strength characterization using measurement while drilling technique
    C. R. Lakshminarayana
    Anup K. Tripathi
    Samir K. Pal
    Indian Geotechnical Journal, 2020, 50 : 994 - 1005
  • [5] Rock strength characterization using measurement while drilling technique
    Lakshminarayana, C. R.
    Tripathi, Anup K.
    Pal, Samir K.
    INDIAN GEOTECHNICAL JOURNAL, 2020, 50 (06) : 994 - 1005
  • [6] Automatic Drilling Process Monitoring (DPM) for in-situ characterization of weak rock mass strength with depth
    Yue, Z. Q.
    Chen, J.
    Gao, W.
    ROCK MECHANICS: MEETING SOCIETY'S CHALLENGES AND DEMANDS, VOLS 1 AND 2: VOL: FUNDAMENTALS, NEW TECHNOLOGIES & NEW IDEAS; VOL 2: CASE HISTORIES, 2007, : 199 - 206
  • [7] Measuring Rock Strength While Drilling Shafts Socketed into Florida Limestone
    Rodgers, Michael
    Mcvay, Michael
    Ferraro, Christopher
    Horhota, David
    Tibbetts, Caitlin
    Crawford, Stephen
    JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING, 2018, 144 (03)
  • [8] In-situ Rock Spalling Strength near Excavation Boundaries
    M. Cai
    P. K. Kaiser
    Rock Mechanics and Rock Engineering, 2014, 47 : 659 - 675
  • [9] An approach to in-situ compressive strength of concrete
    Brunarski, L.
    Dohojda, M.
    BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2016, 64 (04) : 687 - 695
  • [10] In-situ Rock Spalling Strength near Excavation Boundaries
    Cai, M.
    Kaiser, P. K.
    ROCK MECHANICS AND ROCK ENGINEERING, 2014, 47 (02) : 659 - 675
12345