Experimental study on refrigerant maldistribution in a fin-and-tube evaporator for a direct expansion air-conditioning system

In this paper, the design concept of the face split evaporator with a retrofitted suction header and choked flow in the capillary tubes was adopted to improve a direct expansion air-conditioning system with a designed air flow rate of 20,000 m(3)/h. The novel design of the direct expansion air-conditioning system was experimentally tested and validated. Face split evaporator reduced the refrigerant pressure drop in the suction header and the choked flow design limited the maximum flow rate across each branch circuit, which both contributed to the uniform refrigerant flow distribution of the improved system. Consequently, the cooling capacity and COP of the improved system was 10.5% and 13.4% higher than the original system. With the refrigerant mass flow rate of the improved system varying from 1.33 kg/s to 2.05 kg/s, the measured cooling capacity ranged 240-350 kW and the ratio of the system COP to the ideal COP of the reversed Carnot cycle with the same evaporating and condensing temperatures maintained at 0.72-0.74. The experimental results demonstrated that the improved system performed a relatively uniform refrigerant flow distribution among the branch circuit of the evaporator regardless of the refrigerant mass flow rate. This study is beneficial to the optimization design of the multi-circuit evaporator for a direct expansion air-conditioning system with a large air flow rate in engineering applications. (C) 2019 Elsevier B.V. All rights reserved.