Anode-supported SOFC with thin film of proton-conducting BaCe0.8Y0.2O3-α by electrophoretic deposition

被引：10

作者：

Itagaki, Yoshiteru ^{[1
]}

Yamamoto, Yuga ^{[1
]}

Aono, Hiromichi ^{[1
]}

Yahiro, Hidenori ^{[1
]}

机构：

[1] Ehime Univ, Grad Sch Sci & Engn, Matsuyama, Ehime 8908577, Japan

来源：

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN | 2017年 / 125卷 / 06期

关键词：

Solid oxide fuel cell; Proton conducting oxide; BCY; Electrophoretic deposition; OXIDE FUEL-CELLS; ELECTRICAL-CONDUCTIVITY; SINTERED OXIDES; BARIUM CERATE; TEMPERATURE; ELECTROLYTES; STABILITY;

D O I：

10.2109/jcersj2.17048

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Anode-supported solid oxide fuel cells with a thin layer of proton conducting BaCe0.8Y0.2O3- (BCY) were fabricated by electrophoretic deposition technique using an organic suspension. BCY green films were formed on a graphite-added NiO-BCY substrate. By the classification of particle size distribution by the suitable period of sedimentation yielded a crack-free green film. Sintering of the crack-free green film at 1450 degrees C yielded a dense layer of BCY with the thickness of about 9.2 +/- 0.3 mu m after sintering at 1450 degrees C. The BCY thin film on the NiO-BCY substrate exhibited conductivity of 1.6 x 10(12)S.cm(-1) at 600 degrees C and its activation energy was 0.35 eV. The anode-supported single cell with the BCY thin film resulted in the maximum power density of 74.2mW.cm(-2) at 600 degrees C. (C) 2017 The Ceramic Society of Japan. All rights reserved.

引用

页码：528 / 532

页数：5

共 50 条

[41] Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane
Sun, Wenping
Yan, Litao
Shi, Zhen
Zhu, Zhiwen
Liu, Wei
JOURNAL OF POWER SOURCES, 2010, 195 (15) : 4727 - 4730
[42] Two-Step Reactive Aid Sintering of BaZr0.8Y0.2O3−δ Proton-Conducting Ceramics
Siwei Wang
Yan Chen
Lingling Zhang
Cong Ren
Fanglin Chen
Kyle S. Brinkman
Journal of Electronic Materials, 2015, 44 : 4898 - 4906
[43] Two-Step Reactive Aid Sintering of BaZr0.8Y0.2O3-δ Proton-Conducting Ceramics
Wang, Siwei
Chen, Yan
Zhang, Lingling
Ren, Cong
Chen, Fanglin
Brinkman, Kyle S.
JOURNAL OF ELECTRONIC MATERIALS, 2015, 44 (12) : 4898 - 4906
[44] Electrochemical Performances of Proton-Conducting SOFC with La-Sr-Fe-O Cathode Fabricated by Electrophoretic Deposition Techniques
Asamoto, Makiko
Miyake, Shinji
Yonei, Yuka
Yamaura, Hiroyuki
Yahiro, Hidenori
ELECTROCHEMISTRY, 2009, 77 (02) : 143 - 145
[45] Zirconium doping effect on the performance of proton-conducting BaZryCe0.8-yY0.2O3-δ (0.0 ≤ y ≤ 0.8) for fuel cell applications
Guo, Youmin
Lin, Ye
Ran, Ran
Shao, Zongping
JOURNAL OF POWER SOURCES, 2009, 193 (02) : 400 - 407
[46] Effect of titanium doping on chemical and structural stability and electrical properties of proton-conducting solid electrolyte BaCe0.8Sm0.2O3-δ
Yang, Chunyang
Zhao, Hailei
Du, Zhihong
Shen, Yongna
Yan, Chunlin
JOURNAL OF MEMBRANE SCIENCE, 2016, 508 : 104 - 112
[47] High performance anode-supported intermediate temperature solid oxide fuel cells (IT-SOFCs) with La0.8Sr0.2Ga0.8Mg0.2O3-δ electrolyte films prepared by electrophoretic deposition
Bozza, Francesco
Polini, Riccardo
Traversa, Enrico
ELECTROCHEMISTRY COMMUNICATIONS, 2009, 11 (08) : 1680 - 1683
[48] Improving the chemical stability of BaCe0.8Sm0.2O3-δ electrolyte by Cl doping for proton-conducting solid oxide fuel cell
Wang, Yao
Wang, Han
Liu, Tong
Chen, Fanglin
Xia, Changrong
ELECTROCHEMISTRY COMMUNICATIONS, 2013, 28 : 87 - 90
[49] BaZr0.8Y0.2O3-δ-NiO Composite Anodic Powders for Proton-Conducting SOFCs Prepared by a Combustion Method
Bi, Lei
Fabbri, Emiliana
Sun, Ziqi
Traversa, Enrico
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2011, 158 (07) : B797 - B803
[50] Fabrication and electrochemical performance of anode-supported solid oxide fuel cells based on proton-conducting lanthanum tungstate thin electrolyte
Kojo, Gen
Wei, Xiaochu
Matsuzaki, Yoshio
Matsuo, Hiroki
Hellgardt, Klaus
Otomo, Junichiro
SOLID STATE IONICS, 2019, 337 : 132 - 139

← 1 2 3 4 5 →