Eddy-current characterization and plasma rotation control in wall-stabilized tokamak discharges

被引：0

作者：

Mauel, ME ^{[1
]}

Eisner, E ^{[1
]}

Garofalo, A ^{[1
]}

Ivers, TH ^{[1
]}

Kombargi, R ^{[1
]}

Maurer, D ^{[1
]}

Nadle, D ^{[1
]}

Navratil, GA ^{[1
]}

Sainz, A ^{[1
]}

Sankar, MKV ^{[1
]}

Su, M ^{[1
]}

Taylor, E ^{[1
]}

Xiao, Q ^{[1
]}

Reass, WA ^{[1
]}

Wurden, GA ^{[1
]}

机构：

[1] Columbia Univ, Dept Appl Phys, New York, NY 10027 USA

来源：

FUSION ENERGY 1996, VOL 1 | 1997年

关键词：

D O I：

暂无

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

Measurements of eddy-currents flowing on the surfaces of a segmented, adjustable, and close-fitting conducting wall are used to identify MHD instabilities which precede plasma disruptions and to characterize the eddy-currents present during wall stabilization. The eddy-currents on the plasma side of the wall are measured to be similar to those predicted for an ideal axisymmetric wall and account for the effectiveness of segmented walls for wall-stabilization. Dynamic control of slowly growing internal instabilities which persist during wall stabilization is investigated by energizing a small number of highly localized saddle-coils. The toroidal rotation frequency of the resonant mode is strongly modulated by the application of both oscillating single-phase and rotating two-phase saddle-coil currents. When the toroidal phase of a rotating magnetic perturbation is advanced by 180 degrees, the growth of the phase-instability associated with tearing mode stabilization is detected in preparation for active feedback experiments.

引用

页码：731 / 738

页数：6

共 50 条

[41] Characterization and Verification of Eddy-Current Position Sensing for Magnetic Levitation
Peralta, Patricio
Thomas, Sean
Perriard, Yves
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2021, 57 (06) : 5796 - 5805
[42] Defect characterization by using remote field eddy-current testing
Higuchi, H
Isobe, M
Nishikawa, M
ELECTROMAGNETIC NONDESTRUCTIVE EVALUATION, 1997, 12 : 153 - 160
[43] EDDY-CURRENT CHARACTERIZATION OF MAGNETIC TREATMENT OF NICKEL-200
CHERN, EJ
MATERIALS EVALUATION, 1993, 51 (02) : 282 - 284
[44] Characterization of eddy-current sensors and solutions to selective inverse problems
Mallwitz, R
Becker, WJ
ANNUAL MEETING 1998 - NONDESTRUCTIVE MATERIALS TESTING: NONDESTRUCTIVE TESTING OF WELD JOINTS 70 YEARS LATER, 1997, 63 (1-2): : 393 - 402
[45] Eddy-current control of mechanical characteristics of metal of pressure vessels
Bernik, Z.A., 1600, Mezhdunarodnaya Kniga, Moscow, Russian Federation (30):
[46] Multiparameter Control of Multilayer Structures by Pulsed Eddy-Current Techniques
Malushin, D. S.
TECHNICAL PHYSICS LETTERS, 2019, 45 (08) : 757 - 760
[47] MICROPROCESSOR CONTROL OF EDDY-CURRENT INSTRUMENT FOR INCREASED INSPECTION PRODUCTIVITY
HOWARD, BS
MATERIALS EVALUATION, 1980, 38 (02) : S4 - S4
[48] Multiparameter Control of Multilayer Structures by Pulsed Eddy-Current Techniques
D. S. Malushin
Technical Physics Letters, 2019, 45 : 757 - 760
[49] Eddy-current inertial mass damper for cable vibration control
Wang, Zhihao
Cheng, Zhipeng
Wang, Hao
Yue, Fangfang
Gao, Hui
Tumu Gongcheng Xuebao/China Civil Engineering Journal, 2021, 54 (12): : 53 - 63
[50] Improved feedback control of wall stabilized kink modes with different plasma-wall couplings and mode rotation
Peng, Q.
Levesque, J. P.
Stoafer, C. C.
Bialek, J.
Byrne, P.
Hughes, P. E.
Mauel, M. E.
Navratil, G. A.
Rhodes, D. J.
PLASMA PHYSICS AND CONTROLLED FUSION, 2016, 58 (04)

← 1 2 3 4 5 →