Development on micro precision truing method of ELID-grinding wheel (1st report: Principle & fundamental experiments)

被引：1

作者：

Ohmori, H

Yin, S

Lin, W

Uehara, Y

Morita, S

Asami, M

Ohmori, M

机构：

[1] RIKEN, Inst Phys & Chem Res, Itabashi Ku, Tokyo 1730003, Japan

[2] RIKEN, Nexsys Corp, Itabashi Ku, Tokyo 1730003, Japan

来源：

ADVANCES IN ABRASIVE TECHNOLOGY VIII | 2005年 / 291-292卷

关键词：

truing; mechanical truing; electro-discharge truing; metal bond; diamond grinding wheel; ELID (Electrolytic In-Process Dressing);

D O I：

10.4028/www.scientific.net/KEM.291-292.207

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Metal bonded diamond grinding wheels are widely used in the grinding process, especial in ELID grinding. However, truing is difficult owing to the high toughness of metal bond materials and high hardness of diamond abrasives. To realize high precision and high-efficiency truing, we propose a new micro-truing method consisting of electro-discharge truing and electrolysis-assisted mechanical truing in this paper. The process principle and fundamental experimental results are introduced, and the truing performance is discussed. Research results show that the proposed new method is effective for truing metal bonded diamond grinding wheels.

引用

页码：207 / 212

页数：6

共 50 条

[11] Development of wheel surface forming technique for ultra-smoothness vertical surface grinding method (2nd report) -Investigation on truing and dressing method for long wheel life
Sakamoto, Ryushiro
Yasui, Heiji
Sakamoto, Shigehiko
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 2009, 75 (12): : 1423 - 1427
[12] Rapid prototyping by free sintering method (1st report). Fundamental study
Nakazawa, H.
Ishikawa, M.
Matsumoto, Y.
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 1998, 64 (07): : 1078 - 1082
[13] Motion trajectory measurement method of machining center using parallel mechanism (1st report, principle of measurement method and measurement experiments)
Nakao, Yohichi
Goto, Hiroyuki
Yamashita, Chiaki
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2002, 68 (12): : 3735 - 3741
[14] Basic study on microassembly using surface tension (1st report, principle and basic experiments)
Takagi, Hiroshi
Mizuno, Takeshi
Takasaki, Masaya
Ishino, Yuji
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2008, 74 (05): : 1317 - 1321
[15] Fundamental studies on noncontact plastic magnetic bearing (1st report, Working principle and static test)
Shoji, Akira
Kawashima, Giichi
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1993, 59 (557): : 232 - 237
[16] Fundamental study of SPH method (1st report, treatment of 2 phase flow)
Department of Mechanical System Engineering, Toyama University, 3190 Gufuku, Toyama-shi, Toyama, 930 8553, Japan
Nihon Kikai Gakkai Ronbunshu, B, 2006, 11 (2666-2671):
[17] Development of automatic evaluation system for working surface of super abrasive wheel (1st report) - Building of automatic image processing evaluation system for whole grinding wheel surface
Seimitsu Kogaku Kaishi, 2008, 12 (1313-1317): : 1313 - 1317
[18] STUDY OF POROUS TUBES AS A NOISE SUPPRESSOR - (1ST REPORT, EXPERIMENTS ON FUNDAMENTAL CHARACTERISTICS AND OPTIMAL LENGTH).
Seto, Kunisato
Matsuoka, Muneharu
Maeda, Tohru
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1987, 53 (485): : 268 - 273
[19] STUDIES ON DRESSING OF THE RESIN-BOND CBN GRINDING WHEEL (1ST REPORT) - AN INVESTIGATION OF CUTTING EDGE DISTRIBUTION
NAKAZONO, H
YASUI, H
KURUSU, M
HOSOKAWA, A
BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING, 1990, 24 (01): : 51 - 56
[20] Development of haptic sensor for monitoring skin conditions (1st report, fundamental characteristics of the sensor)
Tanaka, M
NON-LINEAR ELECTROMAGNETIC SYSTEMS - ISEM '99, 2000, : 699 - 702

← 1 2 3 4 5 →