Incremental Sheet Forming (ISF)

被引：26

作者：

Kumar, Yogesh ^{[1
]}

Kumar, Santosh ^{[1
]}

机构：

[1] Indian Inst Technol BHU, Dept Mech Engn, Varanasi 221005, Uttar Pradesh, India

来源：

ADVANCES IN MATERIAL FORMING AND JOINING | 2015年

关键词：

Metal forming; Incremental forming; Dieless forming; Deforming tool; FORMABILITY; METAL;

D O I：

10.1007/978-81-322-2355-9_2

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Incremental sheet forming (ISF) process is an advanced flexible manufacturing process to produce complex 3D products. In conventional forming process, the products are produced by dedicated tools, i.e. die and punch. However, ISF does not require any dedicated tool. A laboratory setup of single-point incremental forming machine has been developed using a motion card to control the 3 servo motors for controlling individual 3-axis and spindle movement at IIT (BHU), Varanasi. The strain distribution on the sheet over the length of deformation has been computed. The surface quality of the products is found to be good. Simple simulation has also been carried out.

引用

页码：29 / 46

页数：18

共 50 条

[41] Study of Forming Limit for Rotational Incremental Sheet Forming of Magnesium Alloy Sheet
Park, Jingee
Kim, Jeounghan
Park, Nhokwang
Kim, Youngsuk
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (01): : 97 - 105
[42] Fractal Geometry Rooted Incremental Toolpath for Incremental Sheet Forming
Nirala, Harish K.
Agrawal, Anupam
[J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2018, 140 (02):
[43] A Modular Tooling Set-up for Incremental Sheet Forming (ISF) with Subsequent Stress-Relief Annealing under Partial Constraints
Maqbool, Fawad
Bambach, Markus
[J]. PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017), 2017, 1896
[44] Automobile sheet metal part production with incremental sheet forming
Durgun, Ismail
Sakin, Ali
[J]. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2016, 22 (01): : 8 - 16
[45] Simulation of incremental sheet forming using partial sheet models
Memicoglu, P.
Music, O.
Karadogan, C.
[J]. INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, 207 : 831 - 835
[46] Identification of forming limit curve at fracture in incremental sheet forming
Van-Cuong Do
Quoc-Tuan Pham
Kim, Young-Suk
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (9-12): : 4445 - 4455
[47] Evaluation of forming forces in ultrasonic incremental sheet metal forming
Li, Pengyang
He, Jin
Liu, Qiang
Yang, Mingshun
Wang, Quandai
Yuan, Qilong
Li, Yan
[J]. AEROSPACE SCIENCE AND TECHNOLOGY, 2017, 63 : 132 - 139
[48] Forming parameters for incremental forming of aluminium alloy sheet metal
Jeswiet, J
Hagan, E
Szekeres, A
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2002, 216 (10) : 1367 - 1371
[49] Identification of forming limit curve at fracture in incremental sheet forming
Van-Cuong Do
Quoc-Tuan Pham
Young-Suk Kim
[J]. The International Journal of Advanced Manufacturing Technology, 2017, 92 : 4445 - 4455
[50] Forming strategies and process modelling for CNC incremental sheet forming
Hirt, G
Ames, J
Bambach, M
Kopp, R
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2004, 53 (01): : 203 - 206

← 1 2 3 4 5 →