Kinematics simulation of 5-DOF parallel mechanisms

被引：0

作者：

Yu, Haidong ^{[1
]}

Guo, Qiang ^{[1
]}

Cui, Guohua ^{[1
]}

机构：

[1] Shanghai Univ Engn Sci, Sch Mech & Automot Engn, Shanghai, Peoples R China

来源：

PROCEEDINGS OF THE 2019 INTERNATIONAL CONFERENCE ON ROBOTICS, INTELLIGENT CONTROL AND ARTIFICIAL INTELLIGENCE (RICAI 2019) | 2019年

基金：

中国国家自然科学基金;

关键词：

Parallel mechanism; Freedom; Inverse kinematics; Adams; MANIPULATOR; DESIGN;

D O I：

10.1145/3366194.3366322

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Taking a 5-DOF 4-SPRR-SPR parallel mechanism as the research object, the spiral theory is used to analyze the degree of freedom of the 4-SPRR-SPR parallel mechanism, and the closed-vector method is used to establish the inverse kinematics equation of the parallel mechanism.The virtual prototype is built by Solidworks, and it is imported into Adams to verify the correctness of kinematics inverse solution by taking the welding sphere as an example. The velocity, acceleration curve and force of the driving rod at the end of the mechanism are obtained. The results show that the mechanism has five degrees of freedom of 3T2R, and its inverse solution is fast and convergent. The inverse kinematics solution is correct and the force transfer performance of the driving rod is good. Because of its characteristics of five degrees of freedom, high stiffness and high bearing capacity, this mechanism has great application prospects in friction stir welding of complex surface in space.

引用

页码：712 / 717

页数：6

共 50 条

[21] Kinematics analysis of a novel 5-DOF hybrid manipulator
State Key Laboratory of Robotics and System, Harbin Institute of Technology, 92 West Dazhi Street, Nan Gang District, Harbin
150001, China
不详
210094, China
不详
241007, China
不详
Int. J. Autom. Technol., 6 (765-774):
[22] Type synthesis of 5-DOF parallel manipulators
Li, QC
Huang, Z
2003 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-3, PROCEEDINGS, 2003, : 1203 - 1208
[23] TYPE SYNTHESIS OF 4-DOF & 5-DOF PARALLEL MECHANISMS CONSIDERING PASSIVE CONSTRAINING LIMBS
Guo, Wentao
Guo, Weizhong
Gao, Feng
PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2014, VOL 5B, 2014,
[24] INVERSE DYNAMICS AND SIMULATION OF A 5-DOF MODULAR PARALLEL ROBOT USED IN BRACHYTHERAPY
Plitea, Nicolae
Szilaghyi, Andras
Cocorean, Dragos
Vaida, Calin
Pisla, Doina
PROCEEDINGS OF THE ROMANIAN ACADEMY SERIES A-MATHEMATICS PHYSICS TECHNICAL SCIENCES INFORMATION SCIENCE, 2016, 17 (01): : 67 - 75
[25] Kinematics modelling and optimization design of A 5-DOF hybrid manipulator
Zhao, Yongsheng (yszhao@ysu.edu.cn), 2018, Acta Press, Building B6, Suite 101, 2509 Dieppe Avenue S.W., Calgary, AB, T3E 7J9, Canada (33)
[26] The Forward Solution of Kinematics About 5-DOF Dispensing Manipulator
Ren, Gongchang
Wang, Yongfei
Ye, Qing
Chen, Bo
FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY II, PTS 1 AND 2, 2012, 503-504 : 949 - 952
[27] KINEMATICS MODELLING AND OPTIMIZATION DESIGN OF A 5-DOF HYBRID MANIPULATOR
Zhang, Dongsheng
Xu, Yundou
Yao, Jiantao
Zhao, Yongsheng
INTERNATIONAL JOURNAL OF ROBOTICS & AUTOMATION, 2018, 33 (04): : 407 - 417
[28] Kinematics Modeling and Workspace Analysis of a 5-DOF Hydraulic Manipulator
Li, Feiteng
Zhu, Xiaocong
Cao, Jian
Yao, Bin
CONFERENCE PROCEEDINGS OF 2019 5TH INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND ROBOTICS (ICCAR), 2019, : 713 - 718
[29] COMPARATIVE ANALYSIS FOR KINEMATICS OF 5-DOF INDUSTRIAL ROBOTIC MANIPULATOR
Manjaree, Shiv
Nakra, Bahadur Chand
Agarwal, Vijyant
ACTA MECHANICA ET AUTOMATICA, 2015, 9 (04) : 229 - 240
[30] Forward Position Analysis of 5-DOF Parallel Mechanism
齐明
梅江平
Transactions of Tianjin University, 2006, (06) : 434 - 437

← 1 2 3 4 5 →