Influence of Hot Asphalt Mixture Using Asbuton on Road Composite Pavement

Construction and rehabilitation of road infrastructure in Indonesia require about 1.2 million tons of asphalt per year, approximately 100% used of petroleum asphalt. Only a half of asphalt demand can be provided domestically, while about 600 thousand tons have to be imported from abroad. Indonesia has natural asphalt with a quite large deposit but has not been fully utilized. Lack of availability of asphalt and the increasing demand of the domestic market will give effect to an increase in bitumen cost in the domestic market. Somehow, this is not a sufficient condition due to the rising cost of road infrastructure. This study aims to determine the effect of using a layer of asphalt concrete pavement asbuton to rigid pavement (PR-modification). Stressing that occur in rigid pavement, asphalt concrete layer and base course measured by using LVDT and for the subgrade using soil pressure transducer. Using asbuton on asphalt concrete will have more benefit on improving the stability of the marshall. The maximum deflection occurring in the PR-modification at 5.19 mm with a maximum stress of 175.10 kN. Vertical and horizontal tension that occur at the base course at -20 cm row by 0.855 MPa and 0.00282 MPa. Addition of layers of asphalt concrete in rigid pavement using asbuton has increased power by 9.5%.