Interference and thickness design of bushing of connecting rod small end for Anti-loosening

被引：13
|
作者：
Xiao, Jingwei [1 ]
Qin, Wenjie [1 ]
Xu, Shangjie [1 ]
机构：
[1] Beijing Inst Technol, Sch Mech Engn, Beijing, Peoples R China
来源：
ENGINEERING FAILURE ANALYSIS | 2021年 / 127卷
关键词：
Loosening; Bushing; Connecting Rod Small End; Finite Element Method;
D O I：
10.1016/j.engfailanal.2021.105556
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A bushing is usually assembled with the small end of a connecting rod in an engine by an interference fit. Inappropriate interference or insufficient stiffness of the small end will cause loosening of bushing. Since the bushing loosening often occurred in the development process of the studied V-type diesel engine, the pressing force applied to push the bushing out of the small end was used to evaluate the tightness of the connection between the bushing and the small end. In this paper, the influence of bushing thickness and interference on the pressing force of the bushing of the connecting rod small end in the V-type diesel engine was investigated by finite element method. Considering the strength of the bushing and the stiffness of the connecting rod small end, the suitable bushing thickness and interference for this connecting rod small end were obtained and verified in practice.
引用
收藏
页数：12
相关论文
共 29 条
  • [21] CONNECTING ROD BIG END DESIGN USING FINITE ELEMENT ANALYSIS AND BENCH TESTING VALIDATION
    Seaberg, Wayne G.
    PROCEEDINGS OF THE 2009 SPRING TECHNICAL CONFERENCE OF THE ASME INTERNAL COMBUSTION ENGINE DIVISION, 2009, : 31 - 39
  • [22] Effects of Hyperelliptic Bearings Bush on Connecting Rod Big-End Lubrication and Design Optimization
    Jia, Dewen
    Li, Chengkun
    Deng, Wei
    Ji, Huiping
    Hao, Lina
    LUBRICANTS, 2023, 11 (07)
  • [23] Influence of machining quality of connecting rod small end oil hole on its fatigue safety coefficient
    Zhang, Yi
    Liu, Xiao-Yong
    Shi, Zhi-Yong
    Su, Tie-Xiong
    Zhang, Y. (zhangyi_taiyuan@163.com), 1600, Chinese Society for Internal Combustion Engines (35): : 52 - 56
  • [24] Revisiting Mobility-Based Predictions of Cyclic Minimum Film Thickness in Big-End Connecting Rod Bearings
    Boedo, Stephen
    Blais, Travis M.
    SAE INTERNATIONAL JOURNAL OF ENGINES, 2022, 15 (02) : 263 - 281
  • [25] Study on Oil Supply Characteristics of Connecting Rod Small End Bearing With Splash Lubrication by Smooth Particle Hydrodynamics Method
    Niu, Penghao
    Fu, Hongyu
    Zhang, Hao
    Guo, Yiqiao
    Stelmakh, Oleksandr
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2024, 146 (04):
  • [26] Study on Oil Supply Characteristics of Connecting Rod Small End Bearing With Splash Lubrication by Smooth Particle Hydrodynamics Method
    Niu, Penghao
    Fu, Hongyu
    Zhang, Hao
    Guo, Yiqiao
    Stelmakh, Oleksandr
    Journal of Tribology, 2024, 146 (04)
  • [27] Numerical Investigation into Contact Fatigue of Small End of Engine Connecting Rod Based on Elastic-Plastic Damage Model
    Xiong, Guang
    Dong, Qingbing
    Chen, Zhuang
    COMPUTATIONAL AND EXPERIMENTAL SIMULATIONS IN ENGINEERING, ICCES 2024-VOL 2, 2025, 173 : 498 - 518
  • [28] A new tribo-dynamics model for engine connecting rod small-end bearing considering elastic deformation and thermal effects
    Yin, Jiabao
    Liu, Ruichao
    Zhang, Rui
    Lv, Bugao
    Meng, Xianghui
    TRIBOLOGY INTERNATIONAL, 2023, 188
  • [29] Finite element mass-conserving cavitation algorithm in pure squeeze motion. Validation/application to a connecting-rod small end bearing
    Optasanu, V
    Bonneau, D
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2000, 122 (01): : 162 - 169
123