Test Fixture Compensation Techniques in Impedance Analysis

被引：0
|
作者：
Svilainis, L. [1 ]
Dumbrava, V. [1 ]
机构：
[1] Kaunas Univ Technol, Dept Signal Proc, LT-51368 Kaunas, Lithuania
来源：
ELEKTRONIKA IR ELEKTROTECHNIKA | 2008年 / 07期
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The test fixture influence compensation techniques of the complex impedance measurement are analyzed. The auto-balancing bridge method has been selected for the measurements in 100 kHz to 20 MHz frequency range. The hardware and the software techniques for the test fixture influence compensation are briefly discussed. The complete simulation of the system using P-Spice has been done. The simulation results when using the OPA 8099 and the LMH 6694 operational amplifiers in the auto-balancing bridge method are presented. Three software compensation techniques for the test fixture influence have been analyzed and preliminary simulation and real world experiment results presented. The Open/Short measurement and Open/Short/Load software compensation techniques application results compared with theory both for P-spice simulation and experiment. Ill. 10, bibl. 8 (in English; summaries in English, Russian and Lithuanian).
引用
收藏
页码：37 / 40
页数：4
相关论文
共 50 条
  • [41] Comparative analysis of hematocrit measurements by dielectric and impedance techniques
    Treo, EF
    Felice, CJ
    Tirado, MC
    Valentinuzzi, ME
    Cervantes, DO
    IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING, 2005, 52 (03) : 549 - 552
  • [42] Analysis of high impedance faults using fractal techniques
    Mamishev, AV
    Russell, BD
    Benner, CL
    IEEE TRANSACTIONS ON POWER SYSTEMS, 1996, 11 (01) : 435 - 440
  • [43] A BROAD-BAND MICROWAVE TEST FIXTURE
    ROSS, PB
    GELLER, BD
    MICROWAVE JOURNAL, 1987, 30 (05) : 233 - &
  • [44] CPW TEST FIXTURE CHARACTERIZES MICROWAVE DEVICES
    GRONAU, G
    WEISS, A
    KRAMER, O
    MICROWAVES & RF, 1994, 33 (02) : 101 - &
  • [45] Automated Detection of Test Fixture Strategies and Smells
    Greiler, Michaela
    van Deursen, Arie
    Storey, Margaret-Anne
    2013 IEEE SIXTH INTERNATIONAL CONFERENCE ON SOFTWARE TESTING, VERIFICATION AND VALIDATION (ICST 2013), 2013, : 322 - 331
  • [46] THE INFLUENCE OF THE TEST FIXTURE ON SHIELDING EFFECTIVENESS MEASUREMENTS
    CATRYSSE, J
    DELESIE, M
    STEENBAKKERS, W
    IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 1992, 34 (03) : 348 - 351
  • [47] Test fixture for eccentricity and stiffness of corrugated board
    Renman, M
    EXPERIMENTAL MECHANICS, 1996, 36 (03) : 262 - 268
  • [48] A universal test fixture concept: The standardized breadboard
    Swager, G
    IS&T'S NIP15: INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES, 1999, : 224 - 226
  • [49] THERMOELECTRICALLY COOLED THERMISTOR BOLOMETER TEST FIXTURE
    BEERMAN, HP
    ROZETT, GC
    REVIEW OF SCIENTIFIC INSTRUMENTS, 1965, 36 (08): : 1258 - &
  • [50] TEST FIXTURE FOR MESFET RELIABILITY LIFE TESTS
    CANALI, C
    CHIUSSI, F
    FANTINI, F
    MUZZIN, G
    UMENA, L
    MICROELECTRONICS AND RELIABILITY, 1987, 27 (05): : 897 - 911
12345