Analysis of pollutant transport in the Han River with tidal current using a 2D finite element model

被引:40
|
作者
Lee, Myung Eun [1 ]
Seo, Il Won [1 ]
机构
[1] Seoul Natl Univ, Dept Civil Engn, Seoul 151742, South Korea
关键词
Water quality; Han River; Pollutant transport; Advection-dispersion equation; SUPG method; Tidal flow;
D O I
10.1016/j.jher.2007.04.006
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Pollutant transport in the Han River, which is one of the most important rivers in Korea, was studied using the 2D advection-dispersion model developed in this research. The numerical model was developed based on the streamline-upwind Petrov-Galerkin (SUPG) where a finite element grid was used in order to treat the complex geometry of the natural water bodies. Velocity fields for the input data of pollutant transport simulation were obtained using a 2D hydrodynamic model, RMA2. The pollutant transport simulations in both the steady state flow and in the tidal currents were carried out to analyze the effects of tidal currents on the 2D concentration distribution in the region of application. The simulation results show that, with increasing water level period under tidal conditions, very large recirculation zones occurs and water flows in the upstream direction. Therefore, within the tidal currents, the polluted water goes back and forth with variations in the flow direction. As a result of this movement of pollutant, an oscillation in the concentration appears over time, which reflects both the significantly complex periodic variation in the flow pattern and large circulations. (C) 2007 International Association for Hydraulic Engineering and Research, Asia Pacific Division. Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:30 / 42
页数:13
相关论文
共 50 条
  • [41] Thermal Analysis of Power Transformer Using 2D and 3D Finite Element Method
    Seddik, Mohamed S.
    Shazly, Jehan
    Eteiba, Magdy B.
    ENERGIES, 2024, 17 (13)
  • [42] Hydraulic analysis of a meander on the Danube River using a 2D flow model
    Horvat, Zoltan
    Horvat, Mirjana
    Majer, Fruzsina
    Koch, Daniel
    ENVIRONMENTAL MONITORING AND ASSESSMENT, 2020, 192 (02)
  • [43] Hydraulic analysis of a meander on the Danube River using a 2D flow model
    Zoltan Horvat
    Mirjana Horvat
    Fruzsina Majer
    Dániel Koch
    Environmental Monitoring and Assessment, 2020, 192
  • [44] MODELING OF FERROMAGNETIC MATERIALS IN 2D FINITE-ELEMENT PROBLEMS USING PREISACH MODEL
    HENROTTE, F
    NICOLET, A
    DELINCE, F
    GENON, A
    LEGROS, PW
    IEEE TRANSACTIONS ON MAGNETICS, 1992, 28 (05) : 2614 - 2616
  • [45] A 2D finite element model of a medial collateral ligament reconstruction
    Grassmann, RM
    Shrive, NG
    Frank, CB
    COMPUTER METHODS IN BIOMECHANICS & BIOMEDICAL ENGINEERING - 2, 1998, : 553 - 560
  • [46] Effect of conductivity uncertainties on EEG source localization using a 2D finite element model
    Awada, KA
    Baumann, SB
    Jackson, DR
    PROCEEDINGS OF THE 19TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY, VOL 19, PTS 1-6: MAGNIFICENT MILESTONES AND EMERGING OPPORTUNITIES IN MEDICAL ENGINEERING, 1997, 19 : 2124 - 2127
  • [47] In-silico simulation of nanoindentation on bone using a 2D cohesive finite element model
    Xiao, Pengwei
    Roy, Anuradha
    Wang, Xiaodu
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2024, 151
  • [48] Application of 2D finite element model for nonlinear dynamic analysis of clamp band joint
    Qin, Zhaoye
    Cui, Delin
    Yan, Shaoze
    Chu, Fulei
    JOURNAL OF VIBRATION AND CONTROL, 2017, 23 (09) : 1480 - 1494
  • [49] TIDAL CURRENT SIMULATION OF THE ARIAKE SEA USING THE SIGMA-COORDINATE FINITE ELEMENT MODEL
    Kiri, H.
    Shiratani, E.
    Tanji, H.
    Ishita, K.
    PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON APAC 2011, 2012,
  • [50] Analysis of HEMT Multilayered Structures using a 2D Finite Volume Model
    Aminfar, AmirHossein
    Grayeli, Elah Bozorg
    Asheghi, Mehdi
    Goodson, Kenneth E.
    2012 13TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM), 2012, : 224 - 234